PROVN OF RAIN WATER HARVESTING SOLUTION AND CERTAIN MINOR WORK UNDER GE(N) PATIALA

Rough excavation in soft/loose soil not exceeding 1.5 m deep and getting out complete all as specified and directed.

Rough excavation in soft/ loose soil for each additional 1.5m or part thereof in depth beyond the first 1.5m complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at a level complete all as specified and directed.

Returning, filling in, spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc complete all as specified and as directed by Engineer-in-Charge.

M&L Brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and as directed.

M&L Rendering 15mm thick in cement mortar (1:4) on any face of rough finished /other than fair fair face of B.B/concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L Loose filling with broken stone boulders aggregates of gauge 40 to 80 mm in soakage pits, soakage wells complete all as specified and as directed.

M&L Loose filling with broken stone aggregates of size 20-25 mm in soakage pits, soakage wells complete all as specified and as directed.

M&L incl spreading and levelling in layers of coarse sand of size (1.5 mm to 2.0 mm) all as specified. in soakage pits, soakage wells complete all as specified and as directed.

M & L steel wire fabric, wire of dia 2.45 mm and size of mesh 25 mm fixed to steel member all as specified , wt n. exceeding 4 kg/Sqm complete all as specified.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified.

M&L PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in benching for manholes, bands , coping , bed plate etc with slightly chamfered or rounded angles including necessary form work, if any, and finishing exposed surface even and smooth without using extra cement complete all as specified.

M&L for PCC 1:2:4 TYPE B-1 using 20mm graded crushed stone aggregate as in coping / benching in manhole etc, finished even and smooth using extra cement incl necessary formwork

M&L RCC (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregate as in precast slabs for covers of manholes and set in CM 1:6 incl necessary from work hand placing of manhole cover on varsion complete all as specified and directed by Engineer-in-Charge. Note : Contractor to meniton month and year of casting to be engraved on each MH covers. No extra cost to be paid for this the same will be inlcuded in the above item.

M&L TMT bars 8mm dia and over cut to length bent to shape required incl cranking bending, spirally , hooking ends and binding with mild steel wire not less than 0.9mm dia (annealed) complete all as specified and as directed by Engineer-in-Charge. (Note : The payment shall be made only after placing of cover on manholes)

M&L Reinforced concrete pipes of 150mm bore, class NP3, laid and jointed complete with collars and jointed complete in cement mortar (1:1) complete all as specified and directed by Engr-in-charge.

M&L for preparing old surfaces of wall and applying Two coat of cement base paint complete all as specified and directed.

M&L for Applying two coats of synthetic enamel paint over one coat of red oxide including preparation of steel surface over 10 cm width or girth all as specified.

Driling pilot bore hole of 150 mm dia by rotary method (Direct/reverse) through rig machine for injection well in any kind of soil strata or rock including disposal of surplus soil/rock to a distance not exceeding 50 metre complete all as specified including depolying required rig machinery. T&P , equipment etc, complete including transporting of all materials like rig machine, tools & plants, collection of log samples (drilling /cutting ) and to maintain drill time log book (for 03 bore holes) complete all as specified and directed by Engr-in-charge.

Reaming of 150mm pilot bore hole to 300 mm bore with direct circulation rig machine / reverse rotary circulation method in any kind of strata of soil /rock from ground level to 100 Metre depth below ground level (for 03 bore holes) complete all as specified and directed by Engr-in-charge.

Supply, assembling, jointing, lowering and fixing in position PVC plain casing pipe, heavy duty of size 150mm dia with wall thickness 7.5 to 8.5 mm conforming to IS-4985 having male threads at spigot end and female threads at socket end screwd and socket type in all jointing accessories complete all as specified and directed by Engr-in-charge.

Supply assembling, jointing, lowering and fixing in position PVC screen casing pipe, heavy duty of size 150mm dia having slot of size 1.5 mm wall thickness 7.5 to 8.5 mm conforming to IS-4985 having male threads at spigot end and female threads at socket endscrewed and socket type in all jointing accessories.

M&L PVC bail plug assembly suitable for 150mm nominal bore PVC casing pipe internally threaded and jointed with casing pipe complete all as specified and directed by Engr-in-charge.

M&L Mid steel housing clamps 1050mm long 200mm wide made out of 12 mm thick MS plate made to shape for 300mm bore casing pipe with necessary bolts, nuts and washers at ground level complete all as specified and directed by Engr-in-charge.

M&L PVC well cap 8mm thick, Suitable for 150 mm bore, having internal threads complete all as specified and directed by Engr-in-charge.

Develepoment of tube well with compressed air and after with 25% extra capacity pump by pumping muddy water. (6 hours for each well )complete all as specified and directed by Engr-in-charge.

Supply and packing pea gravel of size 2 mm to 4mm all around casing pipe and slotted pipe complete all as specified and directed by Engr-in-charge.

PVC cross of size 150mm with 100mm brances heavy duty having internal thread complete all as specified and directed by Engr-in-charge.

PVC screened collector pipe having slot of 1.5mm size heavy duty of size 100mm dia complete all as specified and directed by Engr-in-charge.

Taking down cement plaster on brick walls built in cement mortar including raking out joints and concrete surfaces as in wall or ceiling etc. including hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 15mm thick on brick or concrete surface in Cement mortar 1:4, finishing surface w/o using extra Cement, mixed with integral liquid water proofing compound complete all as directed and specified.(Note WPC to be paid separately)

Supply only integral water proofing compound.

M&L 10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

Complete removal of existing treatment of any type/description such as distempering work, internal emulsion etc from internal surfaces of walls & ceiling with mechanical means/grinder complete all as specified and directed.

Material and Labour for exterior painting work including complete removal of existing loose paint layers till plaster level by using jet pressure washer and crack filling up to 3mm by using crack seal & up to 10mm by using textured crack filler. Touch-up by using wall putty with silicon additives followed by application of one coat of truecare exterior primer on walls and Chajjas and applying two coats of modified acrylic smooth emulsion exterior grade with silicon having anti-algal and Dust pickup resistance properties, Material should be applied (Dilution, Recoating period etc) as per manufacturer instructions by using brush complete all as specified and directed.

M&L for Applying 02 coats of oil bound distemper to wall surfaces over & including a coat of interior wall primer and including wall care putty to smooth the surface complete all as specified and directed.

M&L for Applying 02 coats of oil bound distemper to new wall surfaces over & including a coat of interior wall primer and including wall care putty to smooth the surface complete all as specified and directed.

M&L for Preparation of surfaces and applying 02 coats of oil bound distemper to ceiling surfaces over & including a coat of interior primer on ceiling surfaces including wall care putty to smooth surface complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding, removing serviceable tile to store and rubbish off the premises.

M&L Single charge, Ceramic,scratch resistant, joint free, premium quality coloured tiles 600 X 600 mm and 8-10 mm thick, as in floors etc. in any pattern of light tiles as approved, set and jointed in neat cement slurry & including 15mm thick rendering in cement mortar (1:4) and pointed in white or coloured cement to match, in floors etc.pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for anti-skid ceramic joint free premium quality coloured tiles 300 X 300 mm and 7-8 mm thick, as in floors etc. in any pattern of light tiles as approved, set and jointed in neat cement slurry & including 15mm thick rendering in cement mortar (1:4) and pointed in white or coloured cement to match, in floors etc. and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L Ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 6-7 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

Demolition of cement concrete in floors and pavings n. exc 15 cm thickness below or above ground level, complete all as specified and directed.

M&L 75mm thick, PCC 1:3:6, type C-2 (using 40mm graded stone aggregate), as in sub base complete all as specified and directed .

Roughening surfaces of old concrete floor by picking , sweeping clean and washing down water to remove dust, etc all as specified and as directed.

M & L PCC 75mm thick (1:2:4) type B-1, (using 20 mm graded stone agg) as in road cutting &Floorig complete etc all as specified and directed by Engr-In-Charge.

Machine cut kota stone slab as in flooring of size 580 x 580 mm each & 18-20 mm thick, set and jointed in cement slurry over & including screed of 20 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : 1. All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained. 2. The colour of the slabs shall be uniform.

M&L for machine cut kota stone slab as in skirting of 18-20 mm thick, set and jointed in cement slurry over & including screed of 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified

Taking down chowkhats or frames of any description exc 1.5 Sqm and n. exc. 4 sqm each (without taking off shutters from the frame) including cutting hole to size for receive fresh PCC of hold fast and making good the disturbed surface same complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

S&F factory made Pressed steel frames made of MS sheet of 1.0 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 125x60mm complete all as specified and directed by Engr-in-charge.

M&L PCC (1:3:6 ) type C 0 using 12.50 mm graded aggregate as infilling in PS Chowkhats alll as specified .

Taking down door shutters exc 1 sqm but n.exc 2 sqm and removing to or from store complete all as specified and directed.

S&F ISI marked flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 2nd class hard wood incl two coat of synthetic enamel painting over a coat of pink primer complete all as specified and incl supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 3 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 150mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 150mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (0.36mm nominal dia of wire and average width of aperture 1.40mm) incl two coat of synthetic enamel painting over a coat of pink primer complete all as specified and including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 3Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 No per leaf

S&F Powder coated 50 microns extruded aluminium section for doors & windows complete all as specified and as directed by Engr in charge

S&F stainless steel (304 grade) finished butt hinges 100mm complete all as specified and directed.

S&F powder coated aluiminium tower bolt 150mm long complete.

S&F powder coated aluminium handles 150mm complete.

S&F powder coated aluminium hook and eye of suitabel length adjustable to aluminium window shutters compelte.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and 1.40mm avg width of apreture.

S&F 5mm thick frosted glass fixed to aluminium ventilator including necessary EPDm gasket to render the galzing, air and water tight etc and powder coated aluminium beeds 20mm sized complete all as specified and directed.

Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 20mm bore.

Taking up or down existing steel tubing and connections, 15mm bore complete all as directed and specified.

S&F of CPVC pipes of 25mm outer dia with SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors for External water supply all as directed and specified by Engr in Charge

S&F vitreous china premium/1st quality wash basin , white/ivory/off white, flat back, size 500x400 mm including screws & plug and brackets etc. in repair all accessories as recommended by manufacturer complete in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified and directed by Engr in Charge.

S&F in repairs one piece EWC (with flushing cistern) floor mounted with dual flushing system .(Make- CERA Cat Part No S1013108 CAPSTAN or equivalent in parryware /hindware) all as specified and directed.

Supply and fixing in repairs 15mm bore C P Angle cock .

S&F Brass chromium plated shower roses 125mm size with swivel joint and with shower arm any size fixing in repairs all as directed and specified.

S&F basin mixer 15mm bore with popup waste system , fancy type, cast copper alloy, with capston head chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts screwed in repair complete all as specified and directed by Engineer in Charge.

S&F 450mm long PVC connection of approved quality with brass check nuts at both ends for 15mm bore pipe complete all as specified and directed.

S&F Bib tap cast copper alloy chromium plated, fancy type,Long Neck with capstain head handle screwed down screwed for iron pipe and fixed fo 15mm bore pipe after taking down of old brass bib tap complete all as specified.

S&F in repair double layered rotational moulded polyethylene (White Colour) water storage tanks (cylindrical vessal with closed top/ cover) 500ltrs capacity hoisted and fixed in position all as specified including 25mm PVC brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore pipe and including GI nipple/ union of 20mm GI bore to connect to PVC tank complete all as specified.

M&L 20mm bore, gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete.

M&L for PVC multifloor trap / nahni trap 100 mm dia and 450mm long including jointing with solvent cement fixed in repair complete all as specified and directed by Engineer in Charge.

S/F PVC(SWR) gully traps, 125 x 125mm size , square or roundmouthed, including grating fixed in repair complete all as specified abd directed.

Supply and fixing in repairs MS powder coated peg set of Six complete.

S&F in repairs stainless steel soap dish approx size 100x80mm fixed to walls of make as approved by GE complete all as specified.

S&F in stainless steel grating of 100 mm dia for floor/nahni traps complete all as specified and directed

Taking down CI pipes (any sizes or pattern) incl all fitting incl cleaning for refixing or removing to store yard complete all as specified and as directed..

S&F 100mm bore UPVC pipes (SCH-40) laid in trenches or in floors complete.

S&F 75mm bore UPVC pipes (SCH-40) in any length with or without ears with cement joints laid in trenches or in floors complete.

S&F PVC (SWR) bend of 100 mm bore as directed by Engr in Charge

S&F PVC (SWR) bend of 75 mm bore as directed by Engr in Charge

S&F PVC Tees bend upto 150mm dia as directed by Engr in Charge

S&F 6mm thick looking mirror with smooth finish edges/sides fixed to wall etc. complete fixed in position all as specified and directed.

S&F 16 mm thick HDHMR board of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 16 mm thick HDHMR board of single side rigid laminate of approved colour and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet, cupboard shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.

S&F piano hinges mild steel 40mm width , complete all as specified and directed .

S&F Ball bearing runners (25-50)mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and directed

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified.

S&F Stainless Steel 304 grade wire Basket (avg. wait 3.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete fixed in position all as specified.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite and fixing over and including 20mm thick screed bed in CM 1:4 complete all as apecified and directed.

Demolition of brick work including all quoins arches pillars etc built in cement mortar.

M&L for brick work in cement mortar (1:6) using sub class 'B' bricks staight or curved on plan exc 6.0 m mean radius complete all as specified and directed

Excavating in post holes ( or similar holes) each n exc 0.5 cum , getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers exceeding 25 cm

M&L PCC 1:2:4 using 40 mm graded stone aggregate as for fixing posts, complete all as specified and as directed

Removing of surplus soil/ excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L steel work in tubular Pole / Purlin / Rafter including special shaped washer etc complete using ERW or induction but welded tubes conforming to IS 1161 - 1979 grade St - 240 complete all as specified and directed.

M&L Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and n exc 10cm long of 10mm dia complete all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as recommended by manufacturer complete all as specified.

Material & labour for painting to steel surfaces of any description not other wise described over 10cm width or girth with two coats of synthetic enamel paint incl preparation of new surfaces complete all as specified and directed by Engr-in-charge

Supply and fix air cooled split unit air conditioner hot and cold electric driven single phase of capacity of 2 TR, BEE 3 star rated make as approved by GE.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 04 KVA

Supply and fix of copper pipe heavy duty of size 5/8" complete all as specified and directed.

Supply and fix of copper pipe heavy duty of size 3/8" complete all as specified and directed.

Supply and fixing pipe insulation for copper pipe of size 5/8" and 3/8" complete all as specified and directed.

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with MCB SPN 32 Amps, complete all as specified and as directed by Engineer-in-charge.

Please Enable Macros to View BoQ information