84066/E8 REPAIRS TO ROADS ROAD FURNITURES PATHS AND PAVINGS ETC AT CERTAIN AREA OF AF STN JORHAT UNDER GE AF JORHAT

Amount

M&L Repairs to Potholes of any depth, not exc. 1.00 SQM Each including Sweeping free from Dust, Mud or Water, Scoring Sunken Surfaces in Roads, Paths, etc., Cutting around Edges to at least 25mm in Depth, Making Good by Applying Tack Coat at 5.0 KG PER 10 SQM, Putting in Premixed Bituminous Macadam, Well Rammed and Sealed with Binder 9.8 KG PER 10 SQM, blended with 0.09 Cum of Stone Chippings, 6.3mm Size and again Well Rammed (including Supply of Premixed Macadam, Binder and Chippings), Depth of Potholes exc. 30mm, complete all as specified and as directed. NOTE : The Potholes are to be repaired in Independent Locations only.

Scarifying or Picking Gravelled Macadam or Bituminous Macadam Surfaces in Area not exc. 400 Sqm and Depth exc. 50mm and not exc. 100mm, complete all as specified and as directed.

Preparing Water Bound Macadam (WBM) by brushing with Wire Brushes for Removing Caked, Mud, etc., Sweeping with Brooms and Finally Fanning the Cleaning Surfaces with Air Compressor to Remove all Loose Dirt, etc., complete all as specified and as directed.

M&L Applying Evenly a Prime Coat of Cationic Bitumen Emulsion SS1, Confirming to IS: 8887 at a Rate of Application of 0.7-1.0 KG PER SQM on Surface of WMM/ WBM as Specified in Table 500-3 of MoRTH Specifications for Road and Bridge Works 2013, Using Mechanical Sprayer, complete all as specified and as directed.

M&L Premix Bituminous Macadam (Consolidated thickness 75mm or less) with Using Paving Bitumen of VG 30 Grade as Binder 4.0% by Weight of Total Mix, Laid, Rolled and Compacted to required Gradient and Camber to Existing Black Top Surfaces, complete all as specified and as directed. NOTE : Premix Bituminous, Macadam will be designed as IS and as specified in the Particular Specifications. Contractor will Quote Unit Rate considering Bitumen Contents as specified here-in-above. In case of any variation in Binder Content on Minus side, the same will be adjusted @ Rs. 65.00 PER KG of Binder/ Bitumen. However, no Price Adjustment in the Quoted Unit Rate will be made on Plus side. Cost of Filler will deem to be include in the Quoted Unit Rate.

Preparing New Premix Bituminous Macadam/ Existing Black Top Surfaces of Roads by Brushing with Wire Brushes for Removing Caked, Mud, etc., Sweeping with Brooms and Finally Fanning the Cleaning Surfaces with Air Compressor to Remove all Loose Dirt, etc., complete all as specified and as directed.

M&L Applying Evenly a Tack Coat of Bitumen VG-1 0 Grade, Conforming to IS: 73 at a rate of Application of 0.3-0.4 KG PER SQM on Bituminous Surface (New Premix Bituminous Macadam/ Existing Black Top Surfaces) as specified in Table 500-5 of MoRTH Specification for Road and Bridge Works 2013, Using Mechanical Sprayer, complete all as specified and as directed.

M&L Bituminous Premix Semi Dense Asphaltic Concrete (SDAC) 40mm Consolidated thickness with 5.5% Binder Content (Using Paving Bitumen VG 30) by Weight of Total Mix, Laid with Propelled Mechanical Paver, Rolled and Compacted to required Camber and Gradient using Power Roller exc. 8 Tonne and not exc. 12 Tonne Capacity, complete all as specified and as directed. NOTE : Semi Dense Asphaltic Concrete (SDAC) will be designed as specified in the Particular Specifications. Contractor will Quote Unit Rate considering Bitumen Contents as specified here-in-above. In case of any variation in Binder Content on Minus side, the same will be adjusted @ Rs. 65.00 PER KG of Binder/ Bitumen. However, no Price Adjustment in the Quoted Unit Rate will be made on Plus side. Cost of Filler is deem to be include in the Quoted Unit Rate.

M&L Preparing Bituminous Surfaces of Road and Marking 2.5mm thick Centre Lines, Stop Lines, Dashes, Arrows, etc. and the like not exc. 10 Cm Wide on Roads, Pavements with Hot Applied Thermo-plastic Road Marking Paint of Approved Colour, Confirming to BS 3262-1989 with Special Applicator Machine all as per Manufacturers Instructions, complete all as specified and as directed.

S&F Metal Tubular Delineator, Made out of ABS Round Body fitted with 2 No. 65mm dia Highly Reflective Reflectors made out of PMMA and mounted on 50mm dia Mild Steel Pipe of 600mm Height duly Powder Coated and Thermo-Plastic Elastomer 3 Bands of Green, Red and Yellow Reflector Radium Tape of 25mm Wide Strips with Anti-theft Steel Net for Reflector Protection, embedding in PCC 1:2:4 (20mm graded Stone Aggregates) Block of Size 150x150x300mm including necessary Formwork and Earth Works and Making Good the Disturbed Surfaces including Taking out/up Old Unserviceable Delineator of any description, complete all as specified and as directed. NOTE : Cost of PCC, Formwork and Earth Works will deem to be include in the Quoted Unit Rate.

M&L Cat Eye Solar Reflective type of Metal Body Alloy of Size 100x100x20mm with PAMA Strip Lens Reflector of Model No. DA 972.0 fixed with and including MS Stud of suitable Size all as per Manufactures Instructions including Taking up/ out Old Unserviceable Cat Eye of any description, complete all as specified and as directed.

M&L Solar Cat Eye Aluminum Alloy shall (100% Water Proofing Design according to 65) of Size 125x125x25mm (Shank 65mm) of High Efficiency Mono-rystafie Solar Panel 2.4V/ 0.3 Watt One NI-ed Rechargeable Battery (1.2V/ 1600MA) consisting of Super Bright LED with 10,000 to 18,000 mcd completed as per Manufactures instructions, etc. including Taking up/ out Old Unserviceable Solar Cat Eye of any description, complete all as specified and as directed.

DEDUCT FOR 'SCHEDULE OF CREDIT' Bidders will Quote the EQUAL AMOUNT (catered in SCHEDULE OF CREDIT at SERIAL PAGE No. 17 of Tender Documents) under Column 'UNIT RATE' (M) against ROW No. 25 .

M/S PRASANTA MAHANTA (BID ID -3065045)

A K DUTTA CHOWDHURY AND CO (BID ID -3064464)

KAY CEE CO. INDIA (BID ID -3073095)

HEMONTA DAS (BID ID -3072952)