SPECIAL REPAIR TO BLDG NO P-24 ARGUM LINE OFFICERS MD ACCN KAMPTEE

Amount

BR PORTION Taking down chowkhats or frames with shutters (without taking off shutter from the frames) of any size n.exc 1.5 Sqm and removing from site complete all as specified and directed.

All as per item 1 above but exc 1.5 Sqm and n.exc 4.0 Sqm each complete all as specified and directed.

Taking down of shutters of any description n.exc 1.0 Sqm each leaf and removing from site complete all as specified complete all as specified and directed.

All as per Sl item 3 above but exc 1.0 Sqm but n.exc 2.0 Sqm each leaf complete all as specified and directed.

Supply and fix factory made prelam solid PVC door frame of size 50 mm x 47 mm made out of 5 mm both side prelam PVC sheet reinforced with mild steel square tube complete as per manufacturer’s specification and drawing and as directed.

Supply and fix factory made solid panel both side prelam PVC door shutter with feathered edge 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, Mild steel frame shall be covered with heat moulded prelam coloured PVC ‘C’ channel having a PVC sheet strip of 30mm with steel inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, fixing in the frame at site as per specification, drawing and as directed.

Supply and fix 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified

Supply and fix 35mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepaned to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified

Supply and fix galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire staples complete all as specifed and directed

Supply and fix in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire staples complete all as specifed and directed

Supply and fix PVC factory made solid, PVC moulded prelam sheet on the front face & 2mm prelam PVC sheet on back face for door & cupboard shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design in framing, including with matching PVC door frame, fancy type stainless steel handle hinge, ball catcher and as required necessary fittings as per site requirement complete all as specified and directed.

Supply and fix mild steel 150 mm helical door spring including roller and roller plate complete all as specified and directed.

Supply and fix in repair of 20mm dia stainless steel drapery rod, fancy type, including SS knobs and SS brackets, fixed in any length complete all as specified and directed.

Supply and fix 20 mm dia brass chromium plated tubular towel rail 'D' type 600mm long and fixed in position with stainless steel screws and plugs complete all as specified and directed.

Supply and fix 100 mm long stainless steel butt hinges medium weight , welded to steel frame or fixed to chowkat complete all as specified and directed.

Supply and fix floor door stopper 150mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in door complete all as specified and directed.

Supply and fix 150mm long aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed.

Supply and fix aluminium anodized sliding door bolt 250mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified.

Supply and fix aluminium anodized handle casted type150mm long and fixed complete all as specified.

Material and labour for for cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in cills, copings, bed blocks, benching, kerbs, filling hollow of pressed steel frame and the like including necessary form work complete all as specified and directed.

Material and labour for preparation of wood surfaces or wood based materials of any description not otherwise described over 10cm width or girth apply one coat of synthetic enamel paint on old painted wooden surfaces complete all as specified and directed.

Material and labour for complete removal of existing treatment of wooden surface and applying two or more coats of wooden melamine polishing over a coat of wood filler (primer) complete all as specified and directed.

Material and labour for preparation of steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxed primer complete all as specified.

Material and labour for 4 mm thick Non Asbestos , fibre cement building board of size 595x595 mm size in ceiling fixed or laid / inserted to timber / GI/Aluminium framework with screws (Note : GI frame work will be measured and paid for seperately) incl dismantling of old wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.(Note : GI frame work will be measured and paid for seperately)

Material and labour GI powder coated snap grid framework for false ceiling comprising of the following section for making partion of 600 x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32 mm x 15 mm x0.30 mm, cross tee shall be 32 mm x 15 mm x0.30 mm thick with black lining in mid portion and wall angle shall be 24 mmx24 mm x0.30 mm thick complete all as specified and directed.

Supply and fix Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specified and directed.

Supply and fix Mild steel work in Tubular/square hollow trusses, purlins, rafter and tubular posts including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS 1161-1979 Grade St-240 with one shop coat of zinc chromate primer paint etc complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of old asbestos cement sheets as specified and directed

Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws incl dismantling of old PGI sheets complete all as specified and directed.

Material and labour for providing 40mm thick cement concrete 1:2:4 type B1 (using 20mm thick graded stone aggregate) as in floor, laid in panels and position to conform to design and finishing top surface even and smooth with using extra cement incl demolition of cement concrete complete all as specified and directed

Supply and fix 3mm thick and 38mm wide glass dividing strips as in floors inserted in position, conform to design complete all as specified and directed

Material and labour for 75 mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and rough to receive tile etc incl demolition of cement conc 75 mm thick as in plinth complete all as specified and directed .

Material and labour for Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc, including 15mm thick screed bed of cement mortar 1:6 incl 25mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in floor finished rough to receive floor/screed incl demolition of cement concrete floor 40mm thick complete all as specified and directed

Material and labour for Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 to recieve tiles incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed

Material and labour for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 incl 25mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor finished rough to receive floor/screed incl demolition of cement concrete floor 40mm thick complete all as specified and directed

Material and labour for coloured Glazed ceramic tiles in vertical surfaces 350x250 x7mm / 450 x 350x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 10mm thick rendering or bedding layer of cement mortar 1:4 incl dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed.

Material and labour for brick work with sub class "B" old size bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete incl demolition of brick work built in cement mortar all as specified.

Material and labourfor 15 mm thick plaster in CM (1:6) on fair face of brick walls finished even and smooth without using extra cement incl taking down cement plaster /Dado of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc complete all as specified.

Material and labour for 15 mm thick plaster in CM (1:4) on fair face of brick walls finished even and smooth without using extra cement incl taking down cement plaster /Dado of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc complete all as specified.

Material and labour for 10 mm thick plaster in ceiling of CM (1:4) on brick walls finished even and smooth without using extra cement incl taking down cement plaster from ceiling including scrubbing down with water etc complete all as specified.

Material and labour for preparation of old/new plastered surfaces of walls and applying one coat of white wash complete all as specified and directed.

Material and labour for preparation of new plastered surface of walls and applying two coats of oil bound distemper over two coats of white putty even and smooth complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coat of weather proof paint (Apex) over a coat of primer in any tint complete all as per manufacturers instructions and as directed .

Material and labour for preparation of old/new plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

Material and labour for complete removal of existing treatment, nails etc of walls and applying two coats of oil bound distemper over two coats of white putty even and smooth complete all as specified and directed.

Material and labour for complete removal of existing treatment, nails etc of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for complete removal of existing treatment on old plastered surface and applying two coat of weather proof paint (Apex) over 1 mm external wall care putty and a coat of primer in any tint complete as per manufacturers instructions and as directed .

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as directed.

Material and labour precast RCC (1:2:4) type B-1 (using 20mm graded stone aggreagate) as in landings, cover slabs, shelves and similar articles and set in cement mortar (1:4) complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply and fix vitreous China wash down water closet pan (pedestal pattern) white fixed (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

Supply and fix in repair valve less syphonic action 10 ltrs capacity PVC low level flushing cistern, white, with inlet, foat valve, handle, brackets, 32mm dia PVC flush pipe etc including fixing and connecting to flushing rim with rubber cone complete all as specified and directed.

Supply and fix for 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor incl taking up or down 15 mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chauging in wall/floor complete in all respect as specified

All as item No. 54 above but fixing only tubes 15mm any grade to walls and ceiling or laying in floors complete all as specified and directed.

Supply and fix for 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor incl taking up or down 20 mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chauging in wall/floor complete in all respect as specified

All as item No 56 above but fixing only tubes 20 mm any grade to walls and ceiling or laying in floors complete all as specified and directed.

Supply and fix in repair rotational moulded PVC water storage tank two layers cylinderical, vertical with closed top of 1000ltrs capacity, hoisted and fixed in position with and including PTMT float valve 20mm dia and making connections for inlet and outlet complete all as specified and directed .

Supply and fix in repair 15mm concealed stop cock cast copper alloy fancy type chromium plated with long shank and cup (concealed type) , screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fix in repair 15mm bore angle stop valve brass chromium plated fancy type screwed both ends for iron pipe complete all as specified.

Supply and fix in repair 15mm bore long body brass bib tap chromium plated fancy type screwed for iron pipe complete all as specified.

Supply and fixmirror cabinet 400x500mm size complete all as specified and directed.

Supply and fix PVC shelf 450mm size complete all as specified and directed.

Supply and fix in repair 200mm overhead shower alongwith shower arm, complete all as specified and directed.

Supply and fix in repair 15mm size PVC connection 450mm long with PTMT nuts and washers at both ends and fixed to iron pipe or brass ferrule complete all as specified and directed.

Supply and fix in repair 150x150 PTMT grating with waste hole complete all as specified and directed.

Supply and fix sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantileverbrackets and connecting union to pipe overall size 915mm x 460mmbowl size 410mm x 330mm x160mm complete all as specified and directed.

Supply and fix Stainless steel Kitchen plate rack of size 24x30x10 Inch complete all as specified and directed. Make Prayag cat No.-P-330 or equivalent in other makes as approved by GE

Supply and fix in repair wall mixer 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs & wall flange Make Prayag Cat no-7280 or equivalent complete all as specified and directed

Supply and fix Hand shower (health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & wall Hook with NRV (back flow Preventer) all as specified and directed Make : Jaquar Cat No ALE-ESS-593 or technocommercially equivalent in makes as approved by GE

Supply and fix in repair Jet Spray (Butterfly) with 1 mtr tube complete all as specified and directed. Make Prayag Cat No BEA-17 or technocommercially equivalent in makes as approved by GE

Supply and fix in repair tumbler holder complete all as specified and directed. Make Prayag Cat No BA-36 or Jaquar /Essco/Hindware complete all as specified and directed

Supply and fixToilet Paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make Jaquar AEC-1151 or technocommercially equivalent in makes as approved by GE

Supply and fix in repair 20mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply and fix in repair PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed

Supply and fix in repair 110mm bore PVC (SWR) junction single (single T) equal or unequal with oval access door 110mm dia, jointed with approved adhesive complete all as specified and directed

Supply and fix in repair PVC (SWR) bend 110mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed

Supply and fix in repair PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed

Supply and fix in repair 75mm bore PVC (SWR) junction single (single T) equal or unequal with oval access door 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed

Supply and fix in repair PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed

Material and labour for rubber moulded chequered cement concrete tiles of size 30cm X 30cm X 20mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over 75mm thick PCC 1:4:8 type D2 incl demolition of 100mm thick PCC complete all as specified and directed

Material and labour for 50 mm thick sand filling under floor or in foundation including watering and consolidation etccomplete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade etc complete all as directed.

Supply only liquid water proofing compound complete all as specified and directed.

Material and labour for 18-20mm thick granite work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Supply and fix in repair vitreous china wash hand basin, white, flat back size 550x400mm including cast iron bracket, PVC waste pipe 32mm dia and chromium plated brass waste coupling and 15mm dia brass chromium plated pillar tap and fixed in position complete all as specified and directed.

Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc of Fe-410-W(Gde E-250) quality, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed.

Supply and fix mild steel framed work such as monkey protection cage, grills, door frame, gratings with ends of bars shouldered and / or reveted or forged into spikes, framed guard bars and similar work conformig Fe-290 grade -E-165 complete all as specified and directed.

Supply and fix Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply and fix powder coated Anodised aluminium window shutters, side hung or sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, roller, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

Supply and fix powder coated Anodised aluminium ventilator shutters, fixed type without sash bar aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

Supply and fix of 4 mm thick plain sheet glass, ordinary quality and glazing or fixed with aluminium windows complete all as specified and directed.

Supply and fix of 4 mm thick figured glass, fixed to aluminium Ventilator etc complete all as specified and directed.

Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix mild steel work as in bands, straps, hold fasts, clamps and similar small articles conforming to Fe-290 grade -E-165complete all as specified and directed.

Cutting chases, pinning in making good to facing where required and pointing in cement mortar (1:3) to end or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing etc and making good, cutting n.exc 10 cm width or girth complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep in soft/loose soil for foundation, etc. or for shafts, wells, cesspits, manholes, pierholes, etc. and getting out complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft /loose soil complete all as specified and directed.

Excavating over areas, exc 1.5 m deep but n-exc 3.00m and getting out in soft /loose soil complete all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 (using 40mm graded crushed stone agg) as in bed to pipe including packing under and huching against the sides of pipes after they are laid and tested for any dia pipe complete all as specified and directed.

Supply and fix Reinforced concrete pipes150 mm Dia, class NP2, laid and jointed in trenches and jointed in cement & sand mortar 1:1, incl demolition and breaking up drain pipes (SGSW) of 150mm bore complete all as specified and directed.

Material and labour for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitered / stopped ends etc. complete all as specified and directed.

Material and labour Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Material and labour for providingReinforced cement concrete (nominal mix)Type B1 1:2:4 (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh of any description complete all as specified and directed

Excavating in post holes (orsimilar holes) each n exc 0.5cu. m, getting out, returning,filling in and ramming earthor broken rubble mixed withearth around, in layers notexceeding 25 cm , watering and removing surplus soil to a distance n-exc 50 m and making good surface in soft /loose soil complete all as specified and directed.

Material and labour for Cement concrete type C2 1:3:6 ( using 40 mm graded stone agg) as in foundations,filling and mass concrete complete all as specified and directed.

Material and labour for preparation of surfaces plastered or unplastered new surface of wall by washing, rubbing down and stopping of surfaces and applying two coat of cement base paint on walls complete all as specified and directed

Supply and fix of angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Supply of Chain link MS galvanisd fencing of size 50 mm x 50mm and 4 mm dia (4.30 kg /sqm) complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire complete all as specified and directed. (Note chain link fencing , nut bolts and line wires shall be measured seperately under supply only )

Supply and fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long butnot exc 10 cm long of 5 to 10 mm dia complete all as specified and directed.

Supply and fix Mild steel round bars 10mm dia as in tie rod cut to length, bent to shape required, for fixing of chain link fencing complete all as specified and directed.

Material and labour for Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth,and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.

Returning filling in , including spreading, levelling , watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing of excavated materials n. exc.50 m and depositing where directed at a level n, exc 1.5 m above the starting point complete all as specified and directed.

Material and labour for post construction anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

Material and labour for post construction anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

Material and labour post construction anti termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

Material and labour post construction anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

EM PORTION Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to macth with existing surfaces including white washing/colour washing/ distempering to match with existing wall/floor/ceiling finishes, complete all as specified and directed.

Taking down sheet metal enclosure, DB & MCBs main switch etc and making good distrubed sufaces to match with exisiting surfaces, complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces, complete all as specified and directed.

Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specifed and directed. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

Ditto all as per item Sl No 125 above but One ceiling/exhaust fan point controlled by oneway switch and regulator, complete all as specified and directed.

Ditto all as per item Sl No 125 above but One 3 pin 5 amp socket outlet point on the same board with other switches, complete all as specified and directed.

Ditto all as per item Sl No 125 above but One 3 pin 5 amps socket out let point on independent board, complete all as specified and directed.

Ditto all as per item Sl No 125 above but One bell/buzzer point controlled by one bell push, complete all as specified and directed.

Ditto all as per item Sl No 125 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point, complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the following sizes :- 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm complete all as specified and directed. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

Material and labour for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm, complete all as specified and directed. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same Make.

Supply and fixing for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed.

Supply and fixing for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switchboxes, complete all as specified and directed.

Supply and fixing for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes, complete all as specified and directed.

Supply and fixing for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes, complete all as specified and directed.

Supply and fixing ceiling rose, surface type, three terminals 5 amps, complete all as specified and directed.

Supply and fixing Electric Bell Ding dong AC 230 volts, single phase, complete all as specified and directed.

Supply and fixing bell push switch modular type single pole one way 5 amp 240 volts, complete all as specified and directed.

Supply and fixing 0-4 step -2 module modular type electronic regulators for ceiling fan 1200/1400 mm sweep, 240 volts, 120 watts single pole complete all as specified and directed.

M&L for cutting & taking out the existing surface / sunken box / switch plate with switches / sockets and replacing with the following items complete all as specified and directed for: Note:- The disturbed surfaces of wall for concealing box wiring shall be made good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate shall be deemed to include the cost of making good. Switches, sockets, regulators etc to be measured and paid separately. Modular metal flush box with modular cover plate with frame 3 module.

All as per item no 141 above but Modular metal flush box with modular cover plate with frame 4 module complete all as specified and directed.

All as per item no 141 above but but Modular metal flush box with modular cover plate with frame 6 module.

All as per item no 141 above but Modular metal flush box with modular cover plate with frame 8 module complete all as specified and directed.

All as per item no 141 above but Modular metal flush box with modular cover plate with frame 12 module complete all as specified and directed.

Supplying and fixing 18-22 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed. Make & Model:- Philips Astra Line CG LDC-20-CDL/ Philips/ Wipro/ Surya

Supply and fix LED baton fitting 2' length including drivers having energy consumption, 10/11W ,230 V ,50Hz, 6500K, not less than 800 lumen prewired, complete all as directed . Make : Bajaj/ Syska/ Wipro/ Jaquar.

Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed.

Supply and fixing LED light fitting 10W bulk head luminaries with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable suitable size of 230V, 50Hz complete all as specified and directed.

Supply and fix building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc. complete all as specified and directed.

Supply and fixing Exhaust fan metallic body 300mm sweep, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, and making holes complete all as specified and directed.

Supply and fixing Exhaust fan PVC 250mm sweep, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, and making holes complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed.

Supply and fix MCB Triple pole & neutral 240 volt 40 to 63 amps 10 KA, complete all as specified and directed.

Supply and fix MCB single pole & neutral 240 volt 6 to 40 amps 10 KA, complete all as specified and directed.

Supply and fix Energy meter enclosure made of bakelite material with fixing of meter and testing, complete all as specified and directed.

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA, complete all as specified and directed.

Earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protec-tion pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

NOTE : SCHEDULE OF CREDIT (Amount on page No 52 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be considered for acceptance [(-) Rs 47099/- ].

M/s T.S.JOHAR

M/s B S Jain

NORTH INDIA PEST CONTROL

Bidder Name

M/s B S Jain

CREATIVE CONSTRUCTION

NORTH INDIA PEST CONTROL

M/s T.S.JOHAR