Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.8 LAccepted-AOC D 662 WZ 1598 R 1 NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L1 | Accepted-AOC Lowest amount quoted | |
| 2 | L2₹43.9 L+₹3.5 L (8.65%)Rejected-Finance 403 NARSINGH NAGAR RANJHI JABALPUR MP PIN 482005 | JABALPUR | JABALPUR | MP | 482005 | L2 | Rejected-Finance Second lowest amount quoted | |
| 3 | L3₹44.3 L+₹3.9 L (9.65%)Rejected-Finance 968 BAPOO NAGAR RANJHI JABALPUR MP PIN 482005 | JABALPUR | MADHYA PRADESH | 482005 | L3 | Rejected-Finance Third lowest amount quoted | |
| 4 | L4₹44.9 L+₹4.5 L (11.1%)Rejected-Finance B 72 RAJUL TOWNSHIP TILHARI MANDLA ROAD JABALPUR MP PIN 482021 | JABALPUR | MADHYA PRADESH | 482021 | L4 | Rejected-Finance Fourth lowest amount quoted | |
| 5 | L5₹46.0 L+₹5.6 L (13.8%)Rejected-Finance 1432 2 UDAI NAGAR NO 2 POST OFFICE JABALPUR MP 482009 | JABALPUR | MADHYA PRADESH | 482009 | L5 | Rejected-Finance Fifth lowest amount quoted |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
11 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col P Aditya Deepak, GE
Garrison Engineer (East), Near COD Estate, Ranjhi, Jabalpur (MP)-482011
CERTAIN B/R REPAIRS OF DAY TO DAY MAINTENANCE AND B/R REPAIRS OF MES MD ACCN AND DAY TO DAY MAINTENANCE UNDER AGE B/R-II OF GE (EAST) JABALPUR
2023_MES_631039_2
8609/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer (East) Jabalpur
D a (i)
7 documents required · 7 mandatory
₹500
Garrison Engineer (East) Jabalpur
₹80,000
Yes
7 Jun 2024
19 Feb 2024
13 Mar 2024
19 Feb 2024
11 Mar 2024
27 Feb 2024
19 Feb 2024 - 22 Feb 2024
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.
M&L for Non Skid Coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.
M&L for Non Skid Coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.
M&L for Glazed Coloured Ceramic Tiles 350 x 250 x 7 mm/450 x 350 x 7 mm thick in vertical surface such as dado/skirting/risers to steps etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.
M&L for Vitrified ceramic tiles 10 mm thick (Square/rectangular) light shade polished, area of each tiles n.exc 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including rendering 15 mm thick screed bed or bedding layer of cement mortar 1:6 laying floor finishes complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.
M&L for Vitrified ceramic tiles 10 mm thick (Square/rectangular) polished, area of each tiles n.exc 0.36 Sqm, for skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.
M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for Machine cut Kota stone slab 20-25 mm thick in riser of steps, skirting, dado & pillar over & including rendering 15 mm thick in 1:4 cement mortar, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.
Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for complete all as specified and directed.
M&L for Machine cut Kota stone slab flooring 20-25 mm thick over & including 20 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.
S&F Marble tile (Makrana) 300 x 200 x 20 mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing & including 15 mm thick CM 1:4 screed bed types complete all as specified and directed.
M&L for rounding to edges of granite stone slabs one edge, such as in cooking platform, and other similar situations complete all as specified and directed.
M&L for Machine cut Cudapph stone slab on cooking platform/shelf 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete & including 15 mm thick CM 1:4 screed bed types complete all as specified and directed.
M&L for colour rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with white cement and pigments complete & including 15 mm thick CM 1:4 screed bed types complete all as specified and directed.
M&L for Machine pressed precast cement concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.
M&L for Machine pressed precast cement concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D-2 as in floors as sub base using extra cement in patches complete all as specified and directed.
M&L for 100 mm thick PCC 1:4:8 type type D-2 as in floors as sub base in patches complete all as specified and directed.
Supply only Integral Water Proofing Compound (ISI marked).
M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in floor finishes 25 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. Note- Glass dividing strips shall be measured & paid separately as supply only.
M&L for PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in floor finishes 75 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed.
M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for Hardcore of broken stone or boulders of gauge n.exc 63 mm, deposited, spread & levelled in layers n.exc 15 cm thick, watered & rammed to a true surface complete all as specified and directed.
M&L for 75 mm thick Cement Concrete type C-2, 1:3:6 (using 40 mm graded crushed stone aggregate) as in plinth protection etc & finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for providing Glass dividing strips, 3 mm thick and 38 mm width of strip in plinth protection for making panels complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified and directed.
M&L for Brick work with old size flyash bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for Brick work with old size flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 and to be finished even and smooth without using extra cement complete all as specified and directed.
S&F in repair, Door Seal with aluminium beading and 50 mm wide rubber seal, fixed to Aluminium/Wooden doors complete all as specified and directed.
Taking down shutters of any description n.exc 1 sqm each leaf and refixing in same opening after easing and adjusting & also refixing builders hardware as required including renewal of unserviceable screws, etc complete all as specified and directed.
Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each leaf and refixing in same opening after easing and adjusting & also refixing builders hardware as required including renewal of unserviceable screws, etc complete all as specified and directed.
Taking down Chowkhats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down Chowkhats or frames exc 1.50 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down Shutters of any description area exc 1 sqm & n.exc 2 sqm each complete all as specified and directed.
S&F in repair, 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F in repair, 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F in repair, 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
S&F in repair, 75 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
S&F in repair, 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy & fixed complete all as specified and directed.
S&F in repair, 300 mm, mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F in repair, aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.
S&F in repair, 40 mm dia, cupboard knobs & Curtain rod knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.
S&F in repair, 75 mm size, hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate & fixed with screws complete all as specified and directed.
S&F Stainless steel Nobs and bracket complete all as specified and directed.
S&F Curtain dropary 25 mm dia stainless steel rod of fancy type including brass and brackets with curtain rings of approved quality etc complete all as specified and directed.
S&F in repair, Floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm, with hard drawn steel spring, fixed in door complete all as specified and directed.
S&F in repair, Single Door PVC cabinet mirror of size 350 mm x 450 mm with internal shelves complete all as specified and directed.
S&F in repair, Stainless Steel towel ring round complete all as specified and directed. Make-Jaquar Cat Part No. AQN-7721.
S&F in repair, Stainless Steel towel rack 600 mm long with lower hangers complete all as specified and directed. Make-Jaquar Cat Part No. AKP-35781PS.
S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and drawing complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described & applying two coat of synthetic enamel paint (ordinary tint) over & including a coat of red oxide, zinc chrome primer complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth & apply two coat of synthetic enamel paint (ordinary tint) over & including a coat of pink primer complete all as specified and directed.
M&L for Cutting holes in brick walls exc. half brick but not exc. one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required. Complete all as specified and directed.
S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy & fixed complete all as specified and directed.
S&F in repair, 18/19 mm thick, high density PVC/WPC solid fibre board with prelaminated PVC sheet as Kitchen cupboard and frame including taking down the old cupboard shutters and removing to store complete all as specified and directed.
S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flaps (when open) 40 mm complete all as specified and directed.
S&F magnetic catcher with nut and screw of mild steel bright finish complete all as specified and directed.
S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.
S&F in 100 mm repair steel window handles with nuts & bolts or with screws complete all as specified and directed.
S&F in repair steel window peg stay complete all as specified and directed by Engr-in-Charge.
S&F solar control film 25 micron reflective type (gareware sun control or equivalent) complete all as specified and directed by Engr-in-Charge.
Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges including miscellaneous small adjustments complete all as specified and directed by Engr-in-Charge. Note - One skilled Carpenter with one Helper always report at complain cell in working days. If contractor fail in availability given to manpower, penality for Rs. 500.00/per day shall be imposed.
S&F, 1st class Hard Wood beads, straight ( any size) for glazed or gauzed joinery, renewed, including mitres etc, and removing old beads to store (Plain or moulding as requirement) complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed.
S&F Steel window with side hung shutters including box type hinges with steel handle , steel peg stay, complete with glazing bars, dovetailed and welded or ventilators, fixed type, with glazing bar complete all as specified and directed.
S&F Steel window with side hung shutters including box type hinges with steel handle , steel peg stay, complete without glazing bars cooler type window, dovetailed and welded or ventilators, fixed type, with glazing bar complete all as specified and directed.
S&F Mortice lock,vertical type size 100 mm, 4 lever complete all as specified and directed. Make- Godrej
Welding in repairs n.exc 2.5 cm in length (one welder with helper as per requirment base must be depolyed within 12 hours, otherwise penlty for Rs. 500.00/per day shall be imposed).
Welding in repairs exc 2.5 cm but n.exc 5 cm in length (one welder with helper as per requirment base must be depolyed within 12 hours, other wise penlty for Rs. 500.00/per day shall be imposed).
S&F, Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engr-in-Charge including handles, tower bolts, grills, etc complete all as specified and directed. Note - Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.
Dismantling of plain/corrugated steel sheeting, fibre glass sheet any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and directed.
S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Repairing sunken floor leakage as per following steps:- Surface preparation:- (i) Prior to application of Dr fixit powercrite, ensure to clean the substract which shoud be free from all the dust, foregn particles, loose aggregate and oil grease etc. This can be done with the help of scarifying, grinding water jetting and sand blasting etc. (ii) The surface should be wetted well prior to application throughly with water to get SSD condition. (iii) All the depression or pin holes/pot holes to be repaired using Dr Fixit powercrete method mortar in mixing ratio of (1 kg cement : 1.50 kg silica sand : 0.50kg of Dr Fixit powercrete). Coating application:- (i) Mix Cement with Dr. Fixit Powercrete in ratio of 1 : 0.50 ( 1 kg cement OP C53 : 0.50 Dr. Fixit Powercrete ) by weight. (ii) The mix should be stirred thoroughly until smooth homogeneous paste is obtained. (iii) Apply first coat over SSD/wet condition substrate. (iv) Apply and unroll woven glass fibre cloth evenly on the wet coating before it dries out on larger areas. (v) Using a nylon brush, apply a coat of Dr. Fixit Powercrete coating over the glass fabric so as to cover the fabric, allow 5-6 hours of air drying before application of another coat of Dr. Fixit Powercrete slurry coating over the surface. (vi) Provide polymer modified protective plaster of 15-20 mm thick over the coating to ensure safety from mechanical damage. Curing:- (i) Allow Dr. Fixit Powercrete coating to air cure for 3-6 hours after the final coat. (ii) Do not allow the rapid drying of the coating by covering the coating with help of polythene sheet in case of high humidity and windy condition. (iii) However, a moist curing after the air drying is advisable. (iv) Following the moist curing, Dr. Fixit Powercrete coating shall be allowed to air cured for 3 days before submerging it in water. Note - The above procedure is given for Dr Fixit Powercrete, any other equivalent make may please be used as per their manufacturer instruction subject to approved by Engr-in-Charge.
S&F in repair rotational moulded polyethylene water storage tank three layered (cylindrical vertical with closed top) 500 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old unserviceable water storage tank complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tank three layered (cylindrical vertical with closed top) 1000 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old unserviceable water storage tank complete all as specified and directed.
S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 210 gms) complete all as specified and directed.
S&F ball valves for 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 455 gms) complete all as specified and directed.
S&F in repair ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 210 gms) complete all as specified and directed.
S&F in repair ball valves for 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (minimum weight 455 gms) complete all as specified and directed.
S&F in repair PVC Tank cover for rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 or 1000 litre capacity fixed in position with nuts and bolt complete all as specified and directed.
S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 15 mm bore dia of pipe complete all as specified and directed.
S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 20 mm bore dia of pipe complete all as specified and directed.
Taking up or down 15 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F 15 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls & ceilings or laid in floors complete all as specified and directed.
S&F 20 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls & ceilings or laid in floors complete all as specified and directed.
Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 15 mm bore of pipe complete all as specified and directed.
Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 20 mm bore of pipe complete all as specified and directed.
M&L for cleaning and removing all scale and dirt, etc from RCC/PVC tanks exc 250 litre but n.exc 500 litre capacity & from mouths of circulating pipes, etc including washing of water tank with the use of tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
M&L for cleaning and removing all scale and dirt, etc from RCC/PVC tanks exc 500 litre but n.exc 1000 litre capacity & from mouths of circulating pipes, etc including washing of water tank with the use of tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
S&F in repair 15 mm bore, fancy type, chromoium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Taking down bib tap/wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of spindles for 15 mm bore size complete all as specified and directed.
S&F in repair, brass chromium plated Wall Mixer with provision for overhead shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges for 15 mm bore of pipe complete all as specified and directed. Make-Jaquar Cat Part No. CON-273KNUPR.
Petty repairs to leaking water in bib taps, pillar taps stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed by Engr-in-Charge. Note - One Plumber with one Helper always report at complain cell in working days. If contractor fail in availability given to manpower penality for Rs. 500.00/per day shall be imposed).
Petty reapirs to high/low level flusing cistern by adjusting the float valve, leakage PVC connection PVC/GI bend incl replacing of rubber washer cheek uts plunges etc for any type of flush complete all as specified and directed by Engr-in-Charge.
S&F in repair, brass chromium plated Wash Basin Mixer with raised 'J' shaped swinging spout (Table Mounted Model) with 450 mm long braided hoses for 15 mm bore of pipe complete all as specified and directed. Make-Jaquar Cat Part No. CON-319KNB.
S&F in repair, brass chromium plated Sink Mixer with raised 'J' shaped swinging spout (Wall Mounted Model) with connecting legs & Wall flanges for 15 mm bore of pipe complete all as specified and directed. Make-Jaquar Cat Part No. CON-319KN.
S&F in repair, chromium plated angular Stop Cock with wall flange for 15 mm bore of pipe complete all as specified and directed. Make-Jaquar Cat Part No. CON-059KN.
S&F in repair, chromium plated two way Bib Cock for 15 mm bore of pipe complete all as specified and directed. Make-Jaquar Cat Part No. CON-041KN or equivalent.
S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair, 15 mm dia of bore, fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed.
S&F in repair, 32 mm bore, brass chromium plated bottle traps for Wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap & fixed complete all as specified and directed.
S&F in repair, 32 mm bore, PVC waste pipe for Wash Basin/Kitchen Sink etc complete all as specified and directed.
S&F in repair, 32 mm bore dia of discharge pipe, waste coupling of PTMT (half or full threaded) (minimum weight 32 mm-45 gms) etc complete all as specified and directed.
S&F in repair, 32 mm dia of bore, waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repair 100 mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
S&F in repair, Toilet Seat/Commode Jet Spray (regular type) (1.50 meter) Stainless Steel Grade 304 (Built-in Installation type) for 15 mm dia of bore of pipe complete all as specified and directed.
S&F in repair, Health Faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube & ABS wall hook including making connections & fixed in position complete all as specified and directed.
S&F in repair, Vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain & plug & porcelain stopper but including bracket & including supply & fixing of 32 mm dia of bore, brass chromium plated waste coupling complete all as specified and directed.
S&F in repair, Vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.
S&F in repair, plastic water closet seat cover, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repair, Vitreous China squatting pan, ‘Orissa’ Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) etc complete all as specified and directed.
S&F in repair, Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F in repair, Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F in repair, 1 mm thick, Stainless Steel Plate Rack of overall size 24 inch x 36 inch x 10 inch including fixing with rawal plug and screws complete all as specified and directed.
S&F in repair, 10 litre capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repair, internal fitting for 10 litre capacity PVC valveless, syphonic action type flushing cistern complete all as specified and directed.
S&F in repair, flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed.
S&F in repair, 125 mm size, brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.
S&F in repair, PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F in repair, brass chromium plated, tubular towel rail, 20 mm dia, 'D' type, 60 cm long between flanges etc complete all as specified and directed.
S&F in repair, 75 mm diameter of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair, Soap Dish Holder any type fixed to plug with chromoium plated brass screw complete all as specified and directed. Make-Jaquar Cat Part No. ACN-1131N.
S&F in repair, Corner Glass Shelf with brackets complete all as specified and directed. Make-Jaquar Cat Part No. ACN-1173.
S&F in repair, Stainless Steel Double Coat Hook complete all as specified and directed. Make-Jaquar Cat Part No. AQN-7761.
S&F in repair, Sheet Glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
S&F in repair, toilet paper holder with flat recessed type stainless steel complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed. Make:- Symet/ Prayag
Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.
S&F, PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.
S&F, PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.
S&F 100mm dia Stack clampsout of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolts and nuts and securing ends of stays to wall or roof making good in all respect complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or unequal of 110 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or unequal of 75 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) branch pices (single Y) equal of 110 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) branch pices (single Y) equal or unequal of 75 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) junction single, (double T) equal or unequal of 110 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) junction single, (double T) equal or unequal of 75 mm dia bore of pipe complete all as specified and directed.
M&L PVC (SWR) floor trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.
M&L PVC (SWR) mulit trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.
M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
M&L for cutting holes in brick walls exc half brick but n.exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required complete all as specified and directed.
S&F in repair Bib tap 15 mm size standard or PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 1 5mm 90gms/20mm-125gms) complete all as specified and directed.
S&F in repair Bib tap 15 mm size standard or PTMT fancy type any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm 120gms/ 20mm-125gms) complete all as specified and directed.
S&F in repair Bib tap 15 mm size long body standard or PTMT fancy type any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm 120gms/20mm-125gms) complete all as specified and directed.
S&F in repair Bib tap 15 mm size nozzle type standard or PTMT fancy type any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm 95 gms) complete all as specified and directed.
S&F in repair Pillar taps of PTMT (15 mm )any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-110gms) complete all as specified and directed.
S&F in repair Pillar taps of PTMT fancy type (15 mm ) any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-120gms) complete all as specified and directed.
S&F in repair (15 mm) Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-90gms/20mm-112gms) complete all as specified and directed.
S&F in repair Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-90gms) complete all as specified and directed.
S&F Automatic Urinal Sensor including all acessories complete all as specified and directed. Make-Jaquer/parryware
S&F in repair PTMT extension nipple complete all as specified and directed.
Schedule of credit amount of Rs. 1,58,198.00 to be deducted during AOC.
LAL SINGH & SONS
M/S N K SONKAR
GHANI CONSTRUCTION
M/S RAJ BUILDERS
R R VISHWAKARMA CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .