Madurai Corporation zone 5 Palanganatham 35HP ramaiya street 10HP RMS colony 5HP muniyandi puram 4HP submersible motor repairting work in ward 74,73,79,93

Amount

Palaganatham 35Hp Palaganatham Drainage Pumping Station 35 Hp Submersible Motor in Well . Lifting 35Hp Submersible Using ChainBlock then Dismandling of Motor Pump and motor Rotor , Stator and oil Chamber,

35 HP Motor Stator Coil Complete Burnout.Removing Complete Startor coil.then New Enamel Dual Coat Copper Wire Stator Rewinding , “F” ClassInsulation Core Slate using Nomax Paper , “F” Class Insulation Wire Slaves,, “F” Class Insulation Core Stike, “F” Class Insulation Fiber Tabe ,Insulation Varnish,,Water Proof Insulation Red Varnish .Motor Fibre Class Lead Wire, Replacement and 6 Nos Copper Lugs Supply and Gripping.

Supply of Motor Top Side Carbon Segment Vs SS Mechanical oil Seal (Top)

Supply of Motor Bottom Side Diapharm Siliicon oil seal 1 no

Motor Top Side Rubber Sealed Ball Bearing 1 nos,and Bottum Double row Ball Bearing 1 no Over all 2 Nos Supply,High TempPetrolium Bearing Grease Supply

Replacement Pump Side Oil Chamber 100/120 Grade oil 25 lts

Replacement of Motor Teriminal Block

Replacement of Motor and Pump Side “O” Rings

Motor and Pump Profile Gasket

Dynamic Balancing of Pump Shaft Impeller Should be Welding By S.S Material and Machining to the Lathe Works

Replacement of panel OLR

Recondition of Motor Cable Entry Glande and grimming Suitable lugs.

Supply And Fixing.Assembling Of Motor Stator Coil Core Fixing the Motor Body Cell,Pump ImpellerRotor ,Oil Chamber Body Fixing Pump Body Bottum Cell. And Top Cover CableBody Fixing Motor and Pump assembling,New Alanscrows and Spring Washer ,Painting and Erection in Well Loading &Unloading Charge Using Chainblock and Testing

RamaiyaStreet 10Hp RamaiyaStreet Drainage Pumping 10 Hp Submersible Motor in Well . Lifting 10Hp Submersible Using ChainBlock then Dismandling of Motor Pump and motor Rotor , Stator and oil Chamber,

10 HP Motor Stator Coil Complete Burnout.Removing Complete Startor coil.then New Enamel Dual Coat Copper Wire Stator Rewinding , “F” ClassInsulation Core Slate using Nomax Paper , “F” Class Insulation Wire Slaves,, “F” Class Insulation Core Stike, “F” Class Insulation Fiber Tabe ,Insulation Varnish,,Water Proof Insulation Red Varnish .Motor Fibre Class Lead Wire, Replacement and 6 Nos Copper Lugs Supply and Gripping.

Supply of Motor Top Side Carbon Segment Vs SS Mechanical oil Seal (Top)

Supply of Motor Bottom Side Diapharm Siliicon oil seal

Motor Top Side Rubber Sealed Ball Bearing 1 nos,and Bottum Double row Ball Bearing 1 no Over all 2 Nos Supply, High TempPetrolium Bearing Grease Supply

Replacement Pump Side Oil Chamber 100/120 Grade oil 10 lts

Replacement of Motor Teriminal Block

Replacement of Motor and Pump Side “O” Rings

Motor and Pump Profile Gasket

Dynamic Balancing of Pump Shaft Impeller Should be Welding By S.S Material and Machining to the Lathe Works

Replacement Motor Suitable Cable Supply 20 mtrs

Replacement of panel OLR

Recondition of Motor Cable Entry Glande and grimming Suitable lugs.

Supply And Fixing.Assembling Of Motor Stator Coil Core Fixing the Motor BodyCell,PumpImpellerRotor ,Oil Chamber Body Fixing Pump Body Bottum Cell. And Top Cover CableBody Fixing Motor and Pump assembling,New Alanscrows and Spring Washer ,Painting and Erection in Well Loading &Unloading Charge Using Chainblock and Testing

RMS Colony 5Hp RMS Colony Drainage Pumping 5Hp Submersible Motor in Well . Lifting 5Hp Submersible Using ChainBlock then Dismandling of Motor Pump and motor Rotor , Stator and oil Chamber,

5 HP Motor Stator Coil Complete Burnout.Removing Complete Startor coil.then New Enamel Dual Coat Copper Wire Stator Rewinding , “F” ClassInsulation Core Slate using Nomax Paper , “F” Class Insulation Wire Slaves,, “F” Class Insulation Core Stike, “F” Class Insulation Fiber Tabe ,Insulation Varnish,,Water Proof Insulation Red Varnish .Motor Fibre Class Lead Wire, Replacement and 6 Nos Copper Lugs Supply and Gripping.

Supply of Motor Top Side Carbon Segment Vs SS Mechanical oil Seal (Top)

Supply of Motor Bottom Side Diapharm Siliicon oil seal

Motor Top Side Rubber Sealed Ball Bearing 1 nos,and Bottum Double row Ball Bearing 1 no Over all 2 Nos Supply, High TempPetrolium Bearing Grease Supply

Replacement Pump Side Oil Chamber 100/120 Grade oil

Replacement of Motor Teriminal Block

Replacement of Motor and Pump Side “O” Rings

Motor and Pump Profile Gasket

Supply And Fixing.Assembling Of Motor Stator Coil Core Fixing the Motor BodyCell,PumpImpellerRotor ,Oil Chamber Body Fixing Pump Body Bottum Cell. And Top Cover CableBody Fixing Motor and Pump assembling,New Alanscrows and Spring Washer ,Painting and Erection in Well Loading &Unloading Charge Using Chainblock and Testing

MuniyandiPuram 4Hp Muniyandipuram Drainage Pumping 4 Hp Submersible Motor in Well . Lifting 4Hp Submersible Using ChainBlock then Dismandling of Motor Pump and motor Rotor , Stator and oil Chamber,

4 HP Motor Stator Coil Complete Burnout.Removing Complete Startor coil.then New Enamel Dual Coat Copper Wire Stator Rewinding , “F” ClassInsulation Core Slate using Nomax Paper , “F” Class Insulation Wire Slaves,, “F” Class Insulation Core Stike, “F” Class Insulation Fiber Tabe ,Insulation Varnish,,Water Proof Insulation Red Varnish .Motor Fibre Class Lead Wire, Replacement and 6 Nos Copper Lugs Supply and Gripping.

Supply of Motor Top Side Carbon Segment Vs SS Mechanical oil Seal (Top)

Supply of Motor Bottom Side Diapharm Siliicon oil seal

Motor Top Side Rubber Sealed Ball Bearing 1 nos,and Bottum Double row Ball Bearing 1 no Over all 2 Nos Supply, High TempPetrolium Bearing Grease Supply

Replacement Pump Side Oil Chamber 100/120 Grade oil

Replacement of Motor Teriminal Block

Replacement of Motor and Pump Side “O” Rings

Motor and Pump Profile Gasket

Dynamic Balancing of Pump Shaft Impeller Should be Welding By S.S Material and Machining to Lathe

Replacement Motor SS Shaft with Safety rings

Replacement of panel OLR

Recondition of Motor Cable Entry Glande and grimming Suitable lugs.

Supply And Fixing.Assembling Of Motor Stator Coil Core Fixing the Motor BodyCell,PumpImpellerRotor ,Oil Chamber Body Fixing Pump Body Bottum Cell. And Top Cover CableBody Fixing Motor and Pump assembling,New Alanscrows and Spring Washer ,Painting and Erection in Well Loading &Unloading Charge Using Chainblock and Testing

Add GST 18%

MAAG ELECTRICAL SOLUTION (BID ID -1205690)