Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹19.8 LAccepted-AOC 220 GANPATI ENCLAVE DABWALI ROAD BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L-1 | Accepted-AOC Being lowest and reasonable | |
| 2 | L-2₹21.1 L+₹1.3 L (6.49%)Rejected-Finance | L-2 | Rejected-Finance Not being lowest bidder | |
| 3 | L-3₹21.9 L+₹2.1 L (10.4%)Rejected-Finance KOTHI NO 766 PHASE III MODEL TOWN BATHINDA PB | L-3 | Rejected-Finance Not being lowest bidder | |
| 4 | L-4₹23.1 L+₹3.3 L (16.7%)Rejected-Finance | L-4 | Rejected-Finance Not being lowest bidder | |
| 5 | L-5₹25.1 L+₹5.3 L (26.6%)Rejected-Finance | L-5 | Rejected-Finance Not being lowest bidder |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
5 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bathinda
HQ CWE Bathinda Bathinda Mil Stn
COMPREHENSIVE REPAIR TO B/R AND E/M ITEMS IN OTM ACCN SOUTH SIDE OF VIKRAM BATRA MARG UNDER AGE B/R-III OF GE (N) BATHINDA AT BATHINDA MIL STN
2024_MES_636135_1
CWE BTD/TOKEN-55/2023-24
Open Tender
Civil Works
Item Rate
270 days
Bathinda Mil Stn
As per NIT
7 documents required · 7 mandatory
₹500
GE (North) Bathinda
₹80,000
HQ CWE Bathinda
13 Apr 2024
6 Jan 2024
7 Feb 2024
6 Jan 2024
5 Feb 2024
22 Jan 2024
13 Jan 2024
Amount
Demolition of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge
Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, as in floor, set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
Material and labour for Glazed ceramic coloured tiles of size 300mmX 200mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Glazed ceramic coloured tiles of size 350mmx 250mm / 450mmX 300mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor, set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting, dados, set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, including 10 mm thick rendering in cement mortar (1:4) for backing of tiles complete all as specified and as directed by Engineer-in-Charge.
Material and labour for vitrified ceramic coloured tiles (dark shade) 10 mm thick square or rectangular area of each tile not exceeding 0.36 sqm, as in floor, set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
Material and labour for vitrified ceramic coloured tiles (light shade) 10mm thick square or rectangular area of each tile not exceeding 0.36 sqm, as in skirting, dado etc. set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.
Dismantling of asbestos cement /GI (corrugated, semi corrugated, etc sheet in roof covering etc) complete all as specified and as directed.
Material and labour 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, wall etc fixed with L type or J type or cranked hook bolts etc complete all as specified and as directed by Engineer-in-charge.
Supply and fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge.
Supply and fixing mild steel work as in tubular (round/square/rectangular shape of pipes as approved by Engr-In-Charge) trusses, purlins, rafter, MS plates,connecting plates, including post special shaped washers etc complete incl necessary nut bolts, wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 grade St-240 including taking down old pipe complete all as specified and directed by Engr-in-Charge.The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.
Dismantling stone slabs and tiles, chequered tiles, paver block, any type of stone of any description or thickness in floors, apron etc laid dry or bedded and pointed in any mortar.complete all as specified and directed by Engr In Charge
Material and labour for granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including Material and labour for 15 mm thick screed in cement mortar (1:4) and finish the surface rough to receive the tile complete all as specified and as directed by Engineer-in-Charge. Note:- Sample of granite for Shade and type shall be approved by GE before procurement.
Material and labour for 18-20 mm thick any colour of marble work (table rubbered and polished) in floor, cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments including 15mm thick screed bedding/plaster in CM 1:4, colour and design as approved complete all as specified and directed by Engr In Charge.
Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description complete all as specified and as directed by Engineer-in-charge.
Material and labour for brick work with sub class ‘B’ old size Fly ash bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.
Taking down cement plaster of any description on brick or concrete surfaces, etc. including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in- charge.
Material and labour for 15mm thick rendering in CM (1:6) on other than fair faces of brick work or concrete surfaces of walls and finishing even & smooth but without using extra cement complete all as specified and as directed by Engineer-in-charge.
Material and Labour for rendering 10 mm thick in cement mortar (1:3) on brick work or concrete surfaces as in ceiling finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in- charge.
Material and Labour for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls and finishing the surface even & fair faces without using extra cement complete all as specified and as directed by Engineer-in- charge.
Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other mean, washing down with water and applying two coats of cement base paint as per approved tint/colour by using paint brush complete all as specified and as directed by Engineer-in-Charge.
Material and labour three coats of white wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and as directed by Engineer-in-charge.
Material and Labour for preparation of newly plastered or unplastered surfaces of ceiling and apply three coats of white wash on walls, complete all as specified and as directed by Engineer-in- charge.
Supply and fixing vitreous china (white) squatting pan 'Orissa' pattern, white, size 580mm x 440 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including material and labour for lime concrete with 40mm graded stone aggregate with lime mortar 1:3 complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in repairs vitreous china wash down water closet pan (pedestal pattern) white with CI 'P'or 'S' trap including connection to drain ( or outgoing pipe) and to flushing pipe, anti syphonage pipe etc., including plastic water closet seat cover white pedestal pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement plastic water closet seat with cover (white colour) closed pattern with flat bottom/recessed bottom and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in- charge.
Supply and fixing in repair 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, handle including brackets and 32mm dia PVC flush pipe complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs health faucet with 1 mtr long SS pipe and clamp hook including accessories complete all as specified and directed by Engr In Charge
Supply and fixing in repair Jet spray fixed to EWC complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in repair Vitreous china wash hand basin, white, flat back, of size 550 x 400 mm including cast iron cartilever bracket ,32 mm dia brass waste coupling and including fixing of waste fitting and union complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in replacement vitreous china urinal, half stall type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, 32 mm dia full threaded PTMT waste coupling and 32mm dia waste pipe and pointing around urinal back in cement mortar,complete all as specified & directed by Engineer-in-charge.
Supply & fixing in repair CP urinal spreader for urinal, complete all as specified and as directed by Engineer-in- charge.
Supply and fixing in repair wash basin Brass CP mixer for mixing hot & cold water screwed down for 15mm bore pipe and fixed complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in repairs flush kit of any type acessories with inlet ball valve float and handle complete all as specified and directed by Engr In Charge
Supply and fixing 32mm dia, waste pipe for WHB and urinals complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in repairs Toilet Roll Holder with Stainless Steel Flap complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repairs sink made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes including fixing camber brackets and connecting union to pipe overall size 495mm x 420mm bowel size 410mm x 330x 160mm complete all as specified and directed by Engr In Charge
Supply and fixing sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in repair rotational moulded polyethylene water storage tank white colour of capacity 500 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection and fixing ball valve and gate valve complete all as specified and as directed by Engineer-in-charge. (Note :- Float valve and gate valve shall be measured & paid separately as Supply only under appropriate item of BOQ.)
Supply & fixing in repair rotational moulded polyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection and fixing ball valve and gate valve including dismantling/taking down of existing unserviceable PVC water storage tanks of any description complete all as specified and as directed by Engineer-in-charge. (Note :- Float valve and gate valve shall be measured & paid separately as Supply only under appropriate item of BOQ.)
Cleaning and removing all scale and dirt, etc, from tanks capacity exc 250 and n exc 500ltr. and from mouths of circulating pipes, etc.
Cleaning & removing all scale & dirt, etc. from tanks & form mouths of circulating pipes, etc.exc 500 & n exc 1000 litres
Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge
Material and labour 75mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate in alternate pannels ,as in flooring, plinth protection and like , finished even & smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.
Material and labour for cement concrete (1:4:8), type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete and sub base in floors etc complete all as specified and as directed by Engineer-in-charge.
Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade colour and pattern as approved by GE with grey cement and no pigment complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for Sand filling under interlocking tiles including consolidation complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for chequered cement concrete tiles with grey cement and pigments, 25cm x 25cm x 20mm to 22mm thick, machine pressed, coloured & design as approved, set, jointed and pointed in neat cement slurry @ 3.00kg per sqm as in floors etc; laid over & including 15mm thick screed in CM (1:4), with and including mixing of liquid water proofing compound as per manufacturer specifications complete all as specified and as directed by Engineer-in- charge. Note:- The cost of liquid water proofing compound is included in the quoted rate. Nothing extra shall be paid on this account.
Material and labour for Cement concrete 1:3:6, type C-1 using 20 mm graded stone aggregate as in coping , packing around interlocking paver block complete all as specified and as directed by Engineer-in-charge.
Taking down or up 15 mm bore galvanised iron tubing and removal from site complete all as specified and as directed by Engineer-in-charge.
Taking down or up 20 mm bore galvanised iron tubing and removal from site complete all as specified and as directed by Engineer-in-charge.
Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed by Engineer-in-charge.
Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in repair PVC connection 15 mm size with brass nuts on both ends and washers length 450mm complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in replacement bib tap cast copper alloy, chromium plated with crutch or butterfly handle with capstan head, wall flange, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
Supply and fixing chromium plated with long shank and cup ( concealed type) stop valve for 15 mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in replacement stop valve/angle valve cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed both end for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
Supply and fixing in repair pillar tap cast copper alloy with capstan head, chromium plated, fancy type, high pressure with or without letter 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of tap shall be as given in SSR or in relevant IS
Supply and fixing in replacement brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing in repair Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing in repair 20 mm bore Gun metal globe or Gate valve with iron wheel head , screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing in repair 100 mm dia cast iron soil waste & vent pipe drain pipes in any length with or without ears, with cement joints, fixed to wall or floor including taking down old pipe complete all as specified and directed by Engr In Charge
Supply and Fixing in repair 75 mm dia cast iron soil waste & vent pipe drain pipes in any length with or without ears, with cement joints, fixed to wall or floor including taking down old pipe complete all as specified and directed by Engr In Charge
Supply and fixing in repair Cast iron floor trap, 75mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP grating of suitable size complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repair 100mm dia cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing in repair 75mm dia cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing in repair PVC SWR Pipe 110mm bore dia, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing in repair PVC SWR Pipe 75 mm bore dia, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing in repair PVC SWR Bend/Tee 110mm bore dia complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing in repair PVC SWR Bend/Tee 75mm bore dia complete all as specified and as directed by Engineer-in- charge.
Supply & Fixing in repair stainless steel grating square or circular fitting of size 125 mm with or without hole hole etc complete all as specified and as directed.
Material & Labour for PCC 25 mm thick type B0 (1:2:4),using 12.5 mm graded stone agg as in floors for for levelling complete all as specified and directed by Engr In Charge
Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and as directed by Engineer-in-charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each and and removal from site complete all as specified and as directed by Engineer-in-charge.
Taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each complete all as specified and as directed by Engineer-in- charge.
Resecuring and easing & adjusting without taking down shutters of any description n exc 1 Sqm each including all fittings as directed
Resecuring and easing & adjusting without taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each including all fittings as directed
Supply and fixing new beads in repair, straight (any size as per existing) of 2nd class hard wood for glazed and guazed joinery inclduing mitered and removing old beads all as specified.
Supply and fixing factory made 105mm x 60mm pressed steel frames, thickness of sheet 1.25mm for doors with one or more rebates including one shop coat of zinc chromate primer paint including supply and fixing necessary lugs and lock strike plate, etc. , including fixing butt hinges suitable Nos. as directed for each leaf, complete all as specified and as directed by Engineer-in- charge. Note : - (i) Butt hinges shall be measured and paid separately under appropriate item of BOQ as supply only.
Supply and fixing Pressed steel frames with thickness of steel sheet 1.25mm for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125mm x 60mm including one shop coat of priming complete all as specified and as directed by Engineer-in-charge. Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account. supply only.
Supply & fixing factory made plain framed panelled shutters (two panels as approved), 35mm thick of 2nd class hard wood with lock rail and panel inserts of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, including 2nd class soft wood kail beading 20mm wide tapering from 10mm to 5mm on one side and also fitted to chowkhat complete all as specified and as directed by Engineer-in- charge. Note : - (i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ.
Supply and Fixing 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood (Bonsum/ Hollock) edges of frming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge. Note:- Wire gauze/ glass to be measured and paid separately.
Supply and Fixing in repair Prelaminted particle board 19mm thick exterior grade prelaminiated both side with decorative choice lamination fixed with screws to timber frame work as in cup board shelves etc including taking down old board complete all as specified.
Supply and Fixing magnatic catcher fixed with nut/ screw complete all as specified and directed by Engr In Charge
Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, fixed in opening using MS screw 75mm long with PVC fastener including making good disturbed wall surfaces (brick, plastering, tiles and painting work as per existing) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing factory made solid PVC moulded door shutter ( with particle board) 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2 mm plain colour PVC sheet on back face complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed by Engineer-in- charge.
Supply & fixing 100mm long, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in- charge.
Supply and fixing aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified & directed by Engineer-in-charge.
Supply & fixing aluminium anodised sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed by Engineer-in- charge.
Supply and fixing mild steel barrel tower bolts, 200 mm long, stove enamelled black with bright bolts and fixed complete all as specified and as directed by Engineer-in-charge.
Supply and fixing mild steel sliding door bolts with hasp and staple, length of bolt 300mm, plate type, stove enameled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate and fixed, complete all as specified and as directed by Engineer-in-charge.
Supply and fixing mild steel pressed handles, 150 mm long, oval type, stove enamelled black complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing MS 150 mm long ordinary rat tail rod pattern springs incl roller & roller plate complete all as directed.
Supply and Fixing in repairs MS 150 mm long ordinary rat tail rod pattern springs incl roller & roller plate complete all as directed.
Supply and Fixing mild steel sections of any size, in framed work such as grills, framed guard bars,barred iron doors,railings,framework of watertanks, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 Gde E-165.complete all as specified and directed by Engr In Charge
Supply and fixing in replacement drapery curtain rod 25mm dia, fabricated out of mild steel pipe with PVC coating (ABS), wall thickness of pipe not less than 20 guage, including fancy type brackets and decorated end knobs (finials), stop roller etc, fixed on wall for doors and windows curtains, cuttings as required length and fixing at site including fixing arrangements, rawl plug, screws etc. including taking out old any type rod or pelmet boxes with curtain rod complete all as specified & directed by Engineer-in- charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips, oil putty complete all as specified & directed by Engineer-in- charge.
Supply & fixing and cutting as per size requirement 3mm thick sheet glass ordinary quality in squares/retangular not exceeding 0.5sqm in each pane and fixed in any type of doors / windows / ventilators (openable/fixed type) with fixing material complete all as specified & directed by Engineer-in- charge.
Supply & fixing and cutting as per size requirement 3mm thick sheet glass frosted type in squares/retangular not exceeding 0.5sqm in each pane and fixed in any type of doors / windows / ventilators (openable/fixed type) with fixing material complete all as specified & directed by Engineer-in- charge.
Supply and fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staples complete all as specified & directed by Engineer-in- charge.
Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer primer complete all as specified & directed by Engineer-in- charge.
Material and labour for preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed by Engineer-in- charge.
Supply and fixing in repair Gl powder coated frame work 605 mm X 605 mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and duly suspended with 4mm GI wire hangers (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including providing 600mmx600mmx6-7mm thick board in false ceiling with aluminium profile sheet on top side and PVC profile sheet on bottom side fixed in grid as per manufacturer specification and directed by Engineer-In-Charge.
Supply and fixing in repair hollow PVC sheet wall panneling wood grain printed PVC hollow sheet inclusive of side lock cap/ frame and including fixing screws and PVC gutties as per manufacturer specifications and as directed including taking down old unserviceable PVC sheet complete all as specified and as directed by Engr-in-Charge.
Supply and fixing in repair aluminium extruded section body Door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed by Engr- In-Charge.
Supply and fixing in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixedcomplete all as specified and as directed.
Supply and fixing in repair mortice lock with 125mm long handle alumunium body, vertical type of size 100mm of 4 levers etc compete all as specified and as directed
Supply and fixing in repair cylinderical lock 65mm dia with round Knob/handle in golden colour etc compete all as specified and as directed by Engr-in-Charge.
Supply and fixing in repair urinal / WHB mixer sensor flusher/wall mount urinal sensor complete set electrically operated, sensing distance 2-17cm, suitable for existing urinal or as per existing make /design including taking out defective sensor complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair floor door Stopper (140mm overall length of cover plate) aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor etc complete all as specified and as directed.
Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by remove / scraping down all smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using mechanical sander machine (including provision of dust sucking), upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying one coat of cement base paint with using paint brush as approved tint/colur complete all as specified and as directed by Engineer-in-Charge.
Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls / pillars / cornices by scraping down with using steel patti wire/ brush / sand papering or by any other mean, remove / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc brooming all dust and washing down with water including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth (before and after applying putty as per site situation) upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying two coats of cement base paint as per approved tint/colour with using paint brush complete all as specified and as directed by Engineer-in-Charge. NOTE : - Complete removal /scraping to old existing treatment as directed by Engineer-in-charge, each stage i.e after complete removal and before applying CBP as specified above, the surface shall be passed in writing by the Enigineer-in-charge in site order book.
Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by remove / scraping down all smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using mechanical sander machine (including provision of dust sucking), upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying one coat of weather proof exterior emulsion paint with using paint brush , as approved tint/colur complete all as specified and as directed by Engineer-in-charge.
Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by remove / scraping down all smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using mechanical sander machine (including provision of dust sucking), upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying one coat of oil bound distemper with using paint brush , as approved tint/colur complete all as specified and as directed by Engineer-in-charge.
Taking down aluminium shutter of any description (with or without frame as per site requirement) area exceeding 1 sqm but not exceeding 2 Sqm each and refixing in same opening after necessary easing, minor repairs, adjustment /alignment, replacement broken beading and rubber packing, tigtening of screws, adjustment of hinges, adjustment of fittings like handle/tower bolt/door stopper etc (glass if required for taking out, same shall be refix as per original, if any damage during repair same shall be replaced by contractor without any extra cost to department) complete all as specified and as directed by Engineer-in- charge.
Taking down aluminium shutter of any description (with or without frame as per site requirement) area not exceeding 1 Sqm each and refixing in same opening after necessary easing, minor repairs, adjustment /alignment, replacement broken beading and rubber packing, tigtening of screws, adjustment of hinges, adjustment of fittings like handle/tower bolt/door stopper etc (glass if required for taking out, same shall be refix as per original, if any damage during repair same shall be replaced by contractor without any extra cost to department) complete all as specified and as directed by Engineer-in- charge.
Taking down carefully copper /aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem , sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc. complete all as specified and directed by Engineer-in-charge.The weight of aluminium scrap and copper scrap for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.
Material and labour for point wiring complete with 1.5 sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor FRLSH cable (ISI marked) in existing concealed surface conduit/casing caping for one light point /fan point controlled by one switch including 1.5 sqmm single core multi stranded FRLSH copper earth wire to common earth and connecting to earth dolly and existing MS Sunken box and incl 3 mm thick laminated sheet, including making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface, complete all as specified and directed by Engineer-in-charge. complete all as specified and directed by Engineer-in-charge.
All as per item No 126 here in before but for socket outlet 5 pin 5 Amp on same board, complete all as specified and directed by Engineer-in-charge.
All as per item No 126 here in before but for socket outlet 5 pin 5 Amp on independent board but not below the switch board, complete all as specified and directed by Engineer-in-charge.
All as per item No 126 here in before but for socket outlet 6 pin, 5/15 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth, complete all as specified and directed by Engineer-in-charge.
All As per item No 126 in before but for bell/buzzer point, complete all as specified and directed by Engineer-in-charge.
All As per item No 126 in before but for one light point controlled by Two Two way switch, complete all as specified and directed by Engineer-in-charge.
Material and labour for concealed point wiring complete with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken boxe of suitable size (min 60mm deep, suitable length and 1.2mm thick ), 3mm thick bakelite plastic laminated sheet for mounting switches and socket ,fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface, complete all as specified and directed by Engineer-in-charge.
All as per item No 132 here in before but for socket outlet 5 pin 5 Amp on same board, complete all as specified and directed by Engineer-in-charge.
All as per item No 132 here in before but for socket outlet 5 pin 5 Amp on independent board but not below the switch board, complete all as specified and directed by Engineer-in-charge.
All as per item No 132 here in before but for socket outlet 6 pin, 5/15 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth, complete all as specified and directed by Engineer-in-charge.
Material and labour for point wiring complete modular type with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken boxe of suitable for mounting modular switches and socket,fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface, complete all as specified and directed by Engineer-in-charge.
All as per item No 136 here in before but for one socket outlet 5 pin 5 Amp on same board, complete all as specified and directed by Engineer-in-charge.
All as per item No 136 here in before but for one socket outlet 5 pin 5 Amp on independent board but not below the switch board, complete all as specified and directed by Engineer-in-charge.
All as per item No 136 here in before but for one socket outlet 6 pin, 5/15 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth, complete all as specified and directed by Engineer-in-charge.
All As per item No 136 in before but for bell/buzzer point, complete all as specified and directed by Engineer-in-charge.
All As per item No 136 in before but for one light point controlled by Two Two way switch, complete all as specified and directed by Engineer-in-charge.
Supply and fixing modular Fan step regulator -2 module , 120W - 2 module, complete all as specified and directed by Engineer-in-charge.
Supply and fixing 6 Amps Switch 250 volts AC one way ISI marked, complete all as specified and directed by Engineer-in-charge.
Supply and fixing 6 Amps Socket 5 pin shuttered 250 volts AC ISI marked, complete all as specified and directed by Engineer-in-charge.
Supply and fixing Switch 16 Amps 250 volts AC ISI marked, complete all as specified and directed by Engineer-in-charge.
Supply and fixing Socket universal 6/16 Amps 250 volts AC shuttered ISI marked, complete all as specified and directed by Engineer-in-charge.
Supply and fixing 6 Amps Switch 250 volts AC two way ISI marked, complete all as specified and directed by Engineer-in-charge.
Supply and fixing modular Switch 1module , 6 Amps 250 volts AC one way ISI marked fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.
Supply and fixing modular Socket - 2 module , 6 Amps 5 pin shuttered 250 volts fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.
Supply and fixing modular Switch - 1 module, 16 Amps 250 volts AC ISI model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.
Supply and fixing modular Socket universal - 2 module , 6/16 Amps 250 volts AC shuttered ISI model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.
Supply and fixing modular Switch - 1 module , 6 Amps 250 volts AC two way ISI model fantasy with suitable frame and covers witch matching colours, complete all as specified and directed by Engineer-in-charge.
Supply and fixing Bell Push 6 Amp 250 volts AC ISI model fantasy, complete all as specified and directed by Engineer-in-charge.
Supply and fixing Fan regulator Electronic step type (1-4), socket type 230- 240 volt AC supply, complete all as specified and directed by Engineer-in-charge.
Supply and fixing ceiling rose 3 plate flush type 6 Amp 250V AC topline series with polycarbonate 20 X 50 mm two to three terminal, complete all as specified and directed by Engineer-in-charge.
Supply and fixing Batten holder 2 Amp 250V AC with skrit ISI marked top line series , polycarbonate cased body of brass with back plate suitable for batten fittings complete including 9W LED bulb, complete all as specified and directed by Engineer-in-charge.
Supply and fixing Electric / Electronic Bell, ding dong type 230 Volt AC supply, complete all as specified and directed by Engineer-in-charge.
Supply and fixing in replacement wall mounted Retro LED Light Fitting 20 watt, Batten decorative type, with and including 4 feet long, pre wired including LED tube light 20W, 6000K with inbuilt driver complete fitting and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in replacement LED mirror light fiting 7/ 9 watt, 6000K, lineer & compact with decorative grey end caps, polycarbonate body and ribbrd opal diffuser complete fitting with lamp and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in replacement surface mounted, decorative round plastic bulk head LED luminaire comprising of high brightness LED's, IP54 protection, 10 watt , 6000K complete fitting with LED lamp, driver and all other fixing accessories including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in replacement recessed LED ceiling cool light with wide light window for maximized glare free output suitable for 600mm x 600mm and ceiling cutout 595mm x 595mm modular grid/POP ceiling complete fitting with separate electronic driver and high brightness SMD LEDs 36 watt, 6000K and one nos extra LED driver along the fittings including connecting electric connection complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement recessed LED ceiling warm light white with wide light window for maximized glare free output suitable for 600mm x 600mm and ceiling cutout 595mm x 595mm modular grid/POP ceiling complete fitting with separate electronic driver and high brightness SMD LEDs 36 watt, 6000K and one nos extra LED driver along the fittings including connecting electric connection complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement Sleek Pressure die cast aluminium housing, heat resistant glass, energy saving, IP65 protection, better optics for uniform distribution street/Roadway luminaire with high power LED 25 watt complete fitting with driver, LED strip and all other accessories etc, suitable for direct mounting on pipe bracket, fixing on wall with and including brackets made out of 40mm boir GI tubing light grade with suitable bent to shape at 120 degree angle at half metre from bottom (as per sample), fixing with MS clamp (02 Nos) and nut bolts, including before fixing applying two coats of aluminium paint on bracket and clamp over a coat of red oxide primer, including making electric connection with using twin core copper cable of suitable size complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in replacement LED Post top lantern 20 watt, IP65, with cast aluminium spigot housing, with decorative clear opal acrylic diffuser, complete fitting with all accessories and LED lamp, fixing on existing GI pipe system including all electric connections complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in replacement of 3mm thick phenolic sheet 4 inch x 4 inch including suitable machine screws etc. complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in replacement of 3mm thick phenolic sheet 7 inch x 4 inch including suitable machine screws etc. complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in replacement of 3mm thick phenolic sheet 8 inch x 10 inch including suitable machine screws etc. complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in replacement of 3mm thick phenolic sheet 10 inch x 12 inch including suitable machine screws etc. complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing switch piano flush type, 5/6Amps, 250 volts, single pole, one way complete all as specified and as directed by Engineer-in-charge
Supply and fixing Socket outlet multipurpose. 2 in 1, 5 pin 5/6 Amp, 250 volts flush type complete all as specified and as directed by Engineer-in-charge.
Supply and fixing Socket outlet multipurpose. 2 in 1, 5 pin 15/16 Amp, 250 volts flush type complete all as specified and as directed by Engineer-in-charge.
Supply and fixing Batton holder 2 Amp 250 V AC skrit ISI marked top line series, polycarbonate cased body of brass with back plate suitable for batten fittings, complete all as specified and as directed by Engineer-in-charge.
Supply and fixing switch piano flush type, 15/16Amps, 250 volts, single pole complete all as specified and as directed by Engineer-in-charge.
Supply and fixing Modular switch flush type - 1 module , 25 Amps, 250 volts, single pole, one way complete all as specified and as directed by Engineer-in-charge.
Supply and fixing modular Socket outlet - 2 module ,3 pin 25 Amp, 250 volts flush type fixed complete all as specified and as directed by Engineer-in-charge.
Material and labour in replacement Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with and including single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH for earth wire in existing PVC concealed conduit (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and directed by Engineer-in-charge. Notes:- (a) Three single core 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade shall be measured as one length.
Material and Labour in replacement for Sub main wiring with two single core of size 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including cuttting, chasing and grouting including non metallic rigid PVC conduit medium quality of size 20 mm dia conforming to 3537 Part-I ISI marked including all fitting such as Tee, Elbow, bend etc drawn in and including one single core of size 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. .Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 20 mm dia shall be measured as one length.
Material and labour in replacement Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with and including single core 6 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH for earth wire in existing PVC concealed conduit (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and directed by Engineer-in-charge. Notes:- (a) Three single core 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade shall be measured as one length.
Material and Labour in replacement for Sub main wiring with two single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including cuttting, chasing and grouting including non metallic rigid PVC conduit medium quality of size 20 mm dia conforming to 3537 Part-I ISI marked including all fitting such as Tee, Elbow, bend etc drawn in and including one single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. .Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 20 mm dia shall be measured as one length.
Material and labour for PVC conduit 25mm dia (non metallic, heavy duty), fixing on wall surface including all fitting arrangement i.e. PVC clamp, rawl plug, pipe hook, screw, terminal box, junction box, tee, bend, PVC round plate, bell mouth tube ends, couplers etc. including making good disturbed surfaces of walls as per existing after that existing LAN wires and telephone wires any size disconnecting the existing connection and drawing through conduit and re-connection with existing instruments as per original, including taking down old unserviceable conduit, complete all as specified and as directed by Engineer-in-charge.
Material and labour in replacement PVC casing caping of size 32mm (medium grade), fixing on wall/ceiling surface including all fitting arrangement i.e. PVC clamp, rawl plug, screw etc. including making good disturbed surfaces of walls as per existing after that existing LAN wires and telephone wires any size disconnecting the existing connection and drawing through casing caping and re-connection with existing instruments as per original complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in replacement LED 3 watt spot light round in profile of warm white 3000K min with inbuilt driver to be fixed in to existing POP ceiling complete as per sample complete all as specified and directed by Engineer-in-charge.
Material and labour in replacement Electronic driver suitable for Led ceiling lite of 36 watt of size 2' x 2', complete all as specified and directed by Engineer-in-charge.
Supplying and fixing in replacement sheet metal enclousers made out of CRCA mild steel sheet , IP-43 protection, flush mounted with metal door, powder coated DB SPN 12 way 230 V AC with 200 Amp rated bus bar, Double Door,12 modules, dust and vermin proof suitable for incorporation of MCB's and isolators etc. complete all as specified and directed by Engineer-in-charge.Note: MCB/Isolators/MCCB shall be measured and paid seperately under respective items of Schedule 'A' BoQ.
Supply and fixing in replacement factory made DB (made out of CRCA sheet) SPN, 8 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof complete all as specified and directed by Engineer-in-charge.Note: MCB/Isolators/MCCB shall be measured and paid seperately under respective items of Schedule 'A' BoQ.
Supply and fixing in replacement factory made DB (made out of CRCA sheet) TPN, 4 Way 415 V (8+12 modules), double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, complete all as specified and directed by Engineer-in-charge. Note: MCB/Isolators/MCCB shall be measured and paid seperately under respective items of Schedule 'A' BoQ.
Supply and fixing in replacement factory made DB (made out of CRCA sheet) TPN, 8 Way 415 V (8+12 modules), double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof complete all as specified and directed by Engineer-in-charge. Note: MCB/Isolators/MCCB shall be measured and paid seperately under respective items of Schedule 'A' BoQ.
Supplying and fixing in replacement Sheet metal enclousers made out of CRCA mild steel sheet, double door, powder coated DB VTPN 4 way 415 Volt, dust and vermin proof suitable for incorporation of MCCB's upto 125Amp and isolators etc complete complete all as specified and directed by Engineer-in-charge.Note: MCB/Isolators/MCCB shall be measured and paid seperately under respective items of Schedule 'A' BoQ.
Supplying and fixing in replacement Sheet metal enclousers made out of CRCA mild steel sheet, Tempra plug & socket DBs for MCB, powder coated 415 Volt, dust and vermin proof suitable for incorporation of MCB and with and including MCB FP 63 Amps -01 No.complete complete all as specified and directed by Engineer-in-charge.
Supplying and fixing in replacement MCB SP suitable for 230 volts AC supply 5 to 32 Amps, SP rupturing capacity not less than 10KA, C Curve ISI Marked complete all as specified and directed by Engineer-in-charge.
Supplying and fixing in replacement MCB SPN above 40 to 63 Amps, 10 KA 'C' curve 230 V AC, 50 Hz ISI Marked complete all as specified and directed by Engineer-in-charge.
Supplying and fixing in replacement MCB SPN 32 to up to 40 Amps, 10 KA 'C' curve 230 V AC, 50 Hz ISI Marked complete all as specified and directed by Engineer-in-charge.
Supplying and fixing in replacement MCB TPN 63 Amps 415 Volt AC, C curve, 4 module capacity not less than 10 KA ISI Marked complete all as specified and directed by Engineer-in-charge.
Supplying and fixing in replacement MCB TPN 100 Amps 415 Volt AC, C curve, 4 module capacity not less than 10 KA ISI Marked complete all as specified and directed by Engineer-in-charge.
Supplying and fixing in replacement MCCB of capacity 100 Amp, FP, 415 volt, short circuit breaking capacity not less than 25KA , thermal magnetic trip, setting 80-100%, Icu-100% Ics confirming to IEC-947, IS-13947, including thimbles, nuts, bolts, washers etc , MCCB fixing in new DB or the existing DB/Panel including making incoming, outgoing connections, complete all as specified and as directed by Engineer-in-charge. Note :- DB shall be measured and paid separately under appropriate item of BOQ.
Supply and fixing in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one single pole MCB of capacity 20 Amps, 240 volts, AC supply complete all as specified and directed by Engineer-in-Charge.
Material and labour in replacement Retro LED 20 watt tube only appx 4 ' long 6000k min 100 lumens per watt with inbuilt driver to be fixed in to existing batten in replacement of tube 34/40 watt complete all as specified and directed by Engineer-in-charge.
Material and labour for Earthing complete with galvanised iron earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including earth continuity GI wire 4 mm (upto test point from earth plate i.e. 7.5m min) by means of GI bolts/nuts/washersand including protected by 15mm dia GI light grade protection pipe from earth plate to test point, including making of test point. Earth plate shall be surrounded by packed layer of char coal/coke & salt all around bottom and top with alternative layer. 20mm GI light grade pipe for watering (should be 10cm above GL) and including socket, plug, funnel, wire mesh, RCC cover and (including steel for cover) PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil , returning filling and disposal of surplus soil to a distance not exceeding 50m, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) complete all as specified and and as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.
Material and labour for Earthing complete with galvanised iron earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including earth continuity GI strip 32x6mm (upto test point from earth plate i.e. 7.5m min) by means of GI bolts/nuts/washersand including protected by 15mm dia GI light grade protection pipe from earth plate to test point, including making of test point. Earth plate shall be surrounded by packed layer of char coal/coke & salt all around bottom and top with alternative layer. 20mm GI light grade pipe for watering (should be 10cm above GL) and including socket, plug, funnel, wire mesh, RCC cover and (including steel for cover) PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil , returning filling and disposal of surplus soil to a distance not exceeding 50m, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) complete all as specified and and as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.
Material and labour for earthing with copper plate electorde of size 60 cm x 60 cm x 3.15 mm thick buried directly in ground ( earth pit not less than 2.25 m deep below normal ground level), with top edge of the plate vertically to depth of not less than 1.5 m below normal ground level sourrounded from all sides with alternate layers of coal dust and common salt, connected to and including copper strip as size 20x3 mm earth lead connected by menals of brass bolts, nuts washer & check nuts etc conneted to earth test point/main control board including 20mm dia light grade GI pipe for protection to extent 7.5 mtr as earthing lead and GI pipe 20 mm bore for watering including providing funnel and wire mesh, 10mm thick CI cover hanged to CFI frame PCC chamber pit with PCC 1:3:6 type C-1 using 20mm graded stone aggregates, including necessary form work, excavation and earth work in any type of soil , returning filling and disposal of surplus soil to a distance not exceeding 50m, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) complete all as specified and and as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.
Supply and fixing recessed mounted pressure die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver,with led 15 watt,6000K incl connecting electric connection including taking down unserviceable old fitting any type, complete all as specified and directed by Engineer-in-charge.
Supply and fixing in replacement led ceiling lite with wide light window for maximize glare free output led 1x4 slim panel complete fitting with separate electronic driver and high brightness led 36watt, 6000k incl connecting electric connection complete all as specified and directed by Engineer-in-charge.
Supply and fixing in replacement led ceiling lite warm white with wide light window for maximize glare free output led 1x4 slim panel complete fitting with separate electronic driver and high brightness led 36watt, 6000k incl connecting electric connection complete all as specified and directed by Engineer-in-charge.
Supply and fixing in replacement surface mounted pressure die-cast aluminium luminaire in powder coated white finish in square surface mounted LED flate panel with replaceable electronic driver,with led 18 watt,6000K incl connecting electric connection complete all as specified and directed by Engineer-in-charge.
Supply and fixing in replacement recessed mounted pressure die-cast aluminium luminaire in powder coated white finish in square panel with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver,with led 18 watt,6000K incl connecting electric connection complete all as specified and directed by Engineer-in-charge.
Supply and fixing in replacement recessed mounted pressure die-cast aluminium luminaire in powder coated white finish in square panel with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver,with led 12 watt,6000K incl connecting electric connection complete all as specified and directed by Engineer-in-charge.
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ.
RAKESH KUMAR GARG & CO.
M/S KARTIK BUILDERS
Easyways Enterprises
LM CONSTRUCTIONS
M/s GURFATEH BUILDERS
M/S VIAJY BUILDERS & DEVELOPERS
Surindera Kumar Bansal
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .