Construction of Dumping Shed in SMGS Hospital Jammu

Amount

Demolishing brickwork manually /by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead in cement mortar.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge : (1:3:6 or richer mix).

Earthwork in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 metres and lift upto 1.5 m, as directed by Engineer-in-charge for all kinds of soil.

Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including curing but excluding the cost of centering and shuttering. All work upto plinth level.

Providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) including curing but excluding the cost of centering and shuttering. All work upto plinth level.

Centering and shuttering including strutting, propping etc. and removal of formwork for foundations, footings, bases of columns etc.

Brickwork with common burnt clay bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for brickwork with common burnt clay bricks in superstructure above plinth level upto floor five level.

15 mm cement plaster of mix 1:6 (1 cement : 6 sand).

Providing and applying white cement based putty of average thickness 1mm / 2mm of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade (Two or more coats on new work).

Finishing walls with premium acrylic smooth exterior paint of required shade on new work (Two or more coats on new work @ 1.67 ltr/10m2 and including priming coat of exterior primer applying @ 2.20 kg/10m2)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All work upto plinth level. (1:1 ½ :3 , 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Centering and shuttering including strutting, propping etc. and removal of formwork for weather shades, chajjas etc. including edges.

Centering and shuttering including strutting, propping etc. and removal of formwork for : Lintels, beams, plinth beams, girders etc.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular section/ appropriate section and other sections of approved make conforming to IS:733 and IS: 1285 fixed with dash fastener of required dia. And size incl. necessary filling up of gap at junctions i.e. at top, bottom and sides with required EDPM rubber/ neoprene gasket filt etc. incl. cleat angle, aluminium snap beading for glazing paneling complete etc. For fixed portion : Powder coated aluminium(minimum thickness of powder coated 50 microns) 10 Gauge.

For shutters of doors, windows, ventilators including providing and fixing /pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required ( Fittings shall be paid for separately). Powder coated aluminium(minimum thickness of powder coated 50 microns) 14 Gauge.

Providing and fixing glazing in aluminum doors, windows, ventilators, shutters and partitions etc. with EDPM rubber/neoprene gasket etc. complete as per architectural drawing and the direction of engineer in charge ( Cost of aluminium snap beading shall be paid in basic item. With float glass panes of 5 mm thickness :

Providing and fixing powder coated aluminium grill of approved design/pattern, with approved standard section using F-beading and screws etc. complete as per requirement and direction of Engineer-in-Charge.

Providing and fixing fly proof wire gauge to aluminium window shutters using F- beading.

Half brick masonry with bricks of class designation 75 in foundations and plinth in cement mortar 1 : 4 (1 cement : 4 coarse sand).

Providing and fixing aluminium handles powder coated with necessary screws etc.

Providing and fixing aluminium tower bolt powder coated.

Providing and fixing ceramic glazed floor tiles 300 x 300 mm conforming to IS:15622 or approved make in colors such as White,Ivory,grey etc. on 20 mm thick bed of cement mortar 1:4 including pointing the joints with white cement and matching pigment etc. complete.

Providing and fixing 1st quality ceramic glazed tiles conforming make like NITCO , ORIENT , SOMANY , KAJARIA make in all colors shades except burgundy , bottle green , black of any size as approved by engineer’s incharge in skirting , riser of steps and dados 12mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @3.30 kg/M2 including pointing in white cement mixed with pigment of matching shades complete.

Providing and laying vitrified floor tiles of size 600 x 600 mm of approved brand and manufacturer, in all colours and shades, laid on 20 mm thick cement mortar 1:4 including grouting the joints with white cement and matching pigments etc. complete

Providing and laying vitrified tiles of size 600 x 600 mm of approved brand and manufacturer, in all colours and shades, laid on 12 mm thick cement mortar 1:3 including grouting the joints with white cement and matching pigments etc. complete.

Steel work welded in built-up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In grating, frames, guard bar, ladder, railings, brackets, gates and similar works.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded.

Providing and fixing colour coated M.S. Trapezoidal section steel roofing 0.62 mm thick of required color including coat of 0.47 mm thick ridge cover of 0.6m wide and fixing of eaves board including cost of self driven screws, all washers upto the required slope all fittings complete job at site of work including all lead, lift and head load from source to site of work.

Providing and fixing coloured polycarbonate sheet on front door.

Providing and fixing PVC pipes including jointing with seal ring. (150mm dia. Pipe).

Providing and fixing PVC fittings for PVC pipes including jointing with seal ring etc. complete. (150 mm dia. plain bend).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Engaging labour for lifting all malba due to work from site and stacking the same for its further disposal by M.T. in phase manner.

Disposal of material/malba from hospital premises to outside municipal limits by M.T. including loading/unloading complete.

harbans Lal

M/S JUGAL KISHORE

SUKHDEEP SINGH JAMWAL

DALJEET SINGH