SPL REPAIR TO BLDG NO P-583, P-590, P-591, P-592 AND P-593 (01 TO 04) OF MAJ AND ABOVE OFFR MD ACCN AT MANEKSHAW ENCLAVE AT HISAR MIL STN UNDER GE (WEST) HISAR

Amount

Taking down chowkhats or frames with shutters of doors & windows (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters of doors & windows (without taking off shutters from the frames) exc 1.50 sqm & n.exc 4.00 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm & n.exc 2 sqm each leaf complete all as specified and directed.

S&F Pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, size of frame 125 x 60mm complete all as specified and directed.

S&F Pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, size of frame 105 x 60mm complete all as specified and directed.

M&L cement concrete (1:3:6) type C-0 filling of pressed steel frame and hold fast block etc including necessary form work complete all as specified and directed.

M&L for preparing surface of wood and wood based material steel and iron work, new or old, of any description and girth treating end of posts, back of chowkats etc are tarred exc 0.1 sqm but not exc 0.5 sqm each complete all as specified and directed.

All as per item No 07 (here-in-above) but treating small article such as stop, covers, gully grating, hold fast, end of pots, back of chowkats etc area not exc 0.1sqm each complete all as specified and directed.

S&F 30mm thick flush shutter, soild core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F 35mm thick factory made IInd class hard wood panelled door shutters (any numbers of panel) with panels of 12 mm thick BWR plywood having seven ply with commercial veneers on both face of BWP grade and boded with phenol formaldehyde synthetic resin adhesive ISI mark. The size of rail & stile as per IS :1003 (Part-I) kilnseasoned and chemically pressure treated complete all as specified and directed.

M&L 35 mm thick factory made glazed and skeleton shutters of 2nd class HW open rebated and prepared to receive glass/gauze (without sash bar) etc edges or framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR pt-1 section 8.24 (a) complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F prelaminated PVC solid board, 18/19mm thick, prelaminated on one side with decorative choice lamination & other side balancing white lamination including pasting with solvent chemical as required in kitchen cabinet / shelves etc, at site or fixed with screws including necessary brass handle, locking arrangement, sliding channel complete all as specified & directed and design of PVC sheet as approved by GE.

Dismantling of boarding any description fixed in any position with nails complete all as specified and directed.

S&F 19-20 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed.

S&F in repair 19-20 mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face and other side balancing white fixed with screws to timber as in pelmet / shelves frame work complete all as specified and directed.

S&F continous piano hinges mild steel bright finish or electro galvanised of 30mm width of flaps complete all as specified and directed.

S&F 100mm aluminium anodised Hasp and staple, safety type complete all as specified and directed.

S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 gauge for top and bottom rails. MS frame shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading on either side and jointed together with solvent cement adhesive and an additional 5mm thick PVC strip of 20mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete all as shown in SSR part II 2010.

S&F factory made wood grain printed (prelaminated) Solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated colour PVC sheet reinforced with M S square tubes, fixed in opening as per specification & drawing given in SSR Part-II 2010.

S&F for 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 200mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described exc 10 cm width or girth and applying two coats of synthetic enamels paints over a coat of pink primer complete all as specified & directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F butt hinges 100mm medium weight cold rolled mild steel including necessary welding if required complete all as specified and directed.

S&F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n.exc 200 Cucm each complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 300mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removal complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 350 x 450 x 7mm thick as in vertical surface like dado or skirting set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 mm thick granite stone slab topping table rubbed and polished (one piece) in cooking platforms laid over 15mm thick cement screed bed or bedding layer in CM (1:4) including pointing in white cement (1:2) using marble dust complete all as specified and directed.

M&L 20-25mm thick Kota stone slabs of size 550 x 550mm (minimum) over and including 20mm thick screed layer in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of stone incl rubbing & polishing complete all as specified and directed.

M&L 15mm thick Kota stone slabs as in vertical surfaces like dado or skirting over 10mm thick rendering in CM (1:3) set & joined in neat cement slurry and pointed in coloured cement to match incl rubbing & polishing complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.

M&L non skid ceramic tile 400 x 400 x 7-8mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed bed in CM (1:4) complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick light shade (square or rectangular) area of each tile not .exceeding 0.36 sqm as in vertical surfaces like dado or skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 10mm thick screed beding layer in CM (1:4) complete all as specified and directed.

Treatment of sunken floor slab compraises of the following specifications and all as specified :- (i) M&L for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout. (ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out (fixing of nozzle and grouting will be measured and paid separately). (iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty. (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. (vi) GI pipe 50mm dia medium grade 50cm long laid on each sunken floor as spout complete all as specified and direced by EIC. (vii) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout. (viii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint. Note :- (i) Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing is included in the rates quoted above. (ii) All debries obtained from site will be thrown away out side MD land by contractor at his own expense. (iii) The cost of integral water proofing compound deemed to be inclusive in quoted rate.

S&F PVC / MS nozzel and grouting with low viscosity, poly urethane resin / epoxy grout using a grouting pump as directed by GE complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. (Note :- +10mm tolerance in size /dimension of sink is permissible as per standard manufacturers catalogues of makes mentioned in Appendix 'B')

S&F in repair 25mm dia stainless steel curtain rods grade J4 gauge 20, with end bracket or designer side knobs as approved by GE, including fixing half openable brackets BR 100mm long with tighting alanke nuts / side end bracket, 10 Nos S rings in one RM etc complete all as specified and directed.

S&F factory made steel window / ventilator, ISI Marked, (Box type) with side hung shutter including projecting type hinges with steel handle and tower bolt and steel peg stay with glazing bar, dovetailed or welded with one shop coat of zinc chrome primer including making good disturbed surfaces of walls complete all as specified and directed. Note : HQ CEJZ Drawing No TD/2013/01 Sheet 1/3,2/3,3/3.

S&F factory made steel window / ventilator, ISI Marked, (Box type) with side hung shutter including projecting type hinges with steel handle and tower bolt and steel peg stay without glazing bar, dovetailed or welded with one shop coat of zinc chrome primer including making good disturbed surfaces of walls complete all as specified and directed. Note : HQ CEJZ Drawing No TD/2013/01 Sheet 1/3,2/3,3/3.

M&L mild steel square bars as in window guard bars including necessary welding, confirming to Fe-290 gde E-165 complete all as specified and directed.

M&L for preparation of new steel surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamels paints over a coat of red oxide primer complete all as specified and directed.

S&F 4mm thick plain colour acrylic transparent sheet type and glazing with silicon in squares n.exc 0.50 sqm each fixed as in window panes complete all as specified and directed.

S&F 4mm thick plain colour acrylic transparent sheet type and glazing with silicon in squares exc 0.50 sqm each fixed as in window panes complete all as specified and directed.

M&L 40mm thick cement concrete (1:2:4) type B-1 flooring using 20mm graged stone aggregate finished the surface even & smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick cement concrete type C–1 (1:3:6) using 20mm graded stone aggregate as in plinth protection etc complete all as specified and directed.

Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair face of brick walls/ concrete surfaces and finished even and smooth without using any extra cement complete all as specified and directed.

M&L 10mm thick rendering in CM (1:3) on concrete surfaces of ceiling finished even and fair without using extra cement complete all as specified and directed.

M&L Rough cast plaster (Rendering coat not less than 10mm thick in CM (1:3)), while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6 to 12mm mixed with coarse sand and cement in the ratio of (1:1:1) mixed with liquid type water proofing compound as per manufacturers instruction, shall be applied and finished even and fair on external wall upto cill height complete all as specified and directed. Note : The cost of liquid water proofing compound shall be deemed to be inclusive in quoted rate.

S&F glass dividing strips, 3mm thick 38mm wide, inserted in position, confirm to design complete all as specified and directed.

M&L two coats of Oil bound distemper on new plastered or unplastered surfaces over and including not less than 1mm thick acrylic wall care (Birla / JK white / Asian / Berger) putty and a coat of alkali resistant primer on walls including preparation of surfaces complete all as specified and directed. Note : The work under this item shall be got carried out by contractor from authorised applicator of manufactrurer by using modern technique.

M&L Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L Preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint of make : weather coat of Berger / apex ultima of Asian paints / Extrapremium of Shalimar, over and including a coat of exterior wall primer over not less than 1mm thick acrylic wall care putty as approved by manufacturer complete all as specified and directed. Note : The work under this item shall be carried out by contractor from authorised applicator of manufactrurer by using modern technique. The contractor shall also furnish gaurantee of the quality and finish work under this item for a period of five years from certified date of completion of complete work for which an amount ₹ 20/Sqm of quantity of work done under this item shall be retained in final bill. This amount shall be returned only after completion of gaurantee period.

M&L for complete removal of existing treatment, washing down and stopping of distempered and painted surfaces by using electrical operated grinder and applying two coats of exterior emulsion paint of make : weather coat of Berger / Apex ultima of Asian paints / Extrapremium of Shalimar, over and including of a coat of exterior wall primer over not less than 1mm thick acryllic wall care putty as approved by GE complete all as specified and directed. Note : The work under this item shall be got carried out by contractor from authorised applicator of manufactrurer by using modern technique. The contractor shall also furnish gaurantee of the quality and finish work under this item for a period of five years from certified date of completion of complete work for which an amount ₹ 20/Sqm of quantity of work done under this item shall be retained in final bill. This amount shall be returned only after completion of gaurantee period.

S&F in repair vitreous china squatting pan (1st quality) ISI marked Orrisa pattern size 580mm x 440mm white with integral foot rest with CI ‘P’ or ‘S’ trap and fixing in lime concrete (1 lime, 2 sand and 5 aggregate), 150mm thick alround and finished just below level of rim of pan to receive the floor finishing complete all as specified and directed. Make : Hindware cat part No 20070, Parryware cat part No 0123 or equivalent in Jaquar.

S&F in repair viterous China wash down water closet pan (pedestal pattern) white, PP soft close seat cover, fixing accessories including cistern with cistern fittings complete all as specified and directed. Make : Jaquar cat part No CNS-WHT-755SS (WC) & CNS-WHT-207 (Cistern), Hindware cat part No Ariel-20095 (S-22) (for WC) & Ariel-21055 (for cistern), Parriware cat part No Niagara-C0280 (for WC) & Niagara-C0767 (for cistern)

S&F PVC bath cabinet with mirror of size 600 x 450mm as per sample approved complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack overall size 900mm x 600mm x 250mm made out of 1.00mm thick stainless steel sheet of 304 AISI grade of approved design fixed to walls with required size of rawl plug and steel screws as per manufacturers instructions complete all as specified and directed.

S&F stainless steel (grade 304) railing made of Hollow tubes, channels, plates etc, including welding grinding, buffing, polishing and making curvature (wherever require) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steels bolts etc of required size on top of the floor or the side of waist slab with suitable arrangement as approved by GE (for payment purpose only weight of stainless steel member shall be considered excluding fixing accesories such as nuts, bolts, fasteners etc complete all as specified and directed.

S&F in repair, PVC low level cistern 10 lit capacity, valveless, syphonic action type with float, handle incl 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc complete all as specified and directed.

S&F in repair Vitreous china wash basin pedstal type white flat back including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. Make : Jaquar cat part No CNS-WHT-801 (WHB) & CNS-WHT-301 (Pedstal), Hindware cat part No CLEO-10012 (WHB) & CLEO-11003 (Pedstal), Parryware cat part No Neva-C0491 (WHB) & Neva-C0377 (Pedstal).

Taking up or down steel water tubing and connection of 15mm bore complete all as specified and directed.

Taking up or down steel water tubing and connection of 20mm bore complete all as specified and directed.

M&L for GI tubing 15mm bore with all fittings and fixed complete to walls, ceilings or laid in floors medium grade complete all as specified and directed.

M&L for GI tubing 20mm bore with all fittings and fixed complete to walls, ceilings or laid in floors medium grade complete all as specified and directed.

S&F in repair 15mm bore fancy type chromium plated cast copper alloy bib taps with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed. Cat part No Jaquar ORP-10037PM, Hindware cat part F-00002, Parryware cat part No G4104A1.

S&F in repair fancy type chromium plated angular stop valves, cast copper alloy with crutch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brass ferrule complete all as specified and directed. Cat part No Jaquar LYR-38053, Hindware cat part F-720005, Parryware cat part No G2307A1.

S&F in repair brass chromium plated over head shower rose fitted to steel pipe or union complete all as specified and directed. Cat part No Jaquar OHS-1989, Hindware cat part F160048, Parryware cat part No T9942A1.

S&F in repair toilet paper holder of brass chromium plated including screw and chromium plate brass wooden / plastic cleats complete all as specified and directed. Make : Jaquar / Cera / Parryware

S&F in repair Brass CP single lever basin mixer without popup with 450mm long braided hoses for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. Cat part No Jaquar ORP10011BPM, Hindware cat part F280010SCP, Parryware cat part No T3914A1.

S&F in repair Brass CP wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flangers complete all as specified and directed. Cat part No Jaquar ORP-10117PM, Hindware cat part F390020, Parryware cat part No G3417A1.

S&F in repairs CP sink mixer with regular swinging spout (wall mounted model) with connecting legs and wall flanges complete all as specified and directed. Cat part No Jaquar FLR5309N, Hindware cat part F390023, Parryware cat part No G0639A1.

S&F 15mm bore quarter turn CP Pillar tap complete all as specified and directed. Cat part No Jaquar ARI-39011, Hindware cat part F400001, Parryware cat part No G3302A1.

S&F in repair CP brass jet with SS pipe of suitable length for 15mm bore complete all as specified and directed.

S&F in repair cardiff health faucet with SS hose and hook complete all as specified and directed. Make : Parrywere Cat No T9941A1 or equivalent makes as specified in Appx 'B'.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for providing precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in slab supported on walls, MS angle iron frame, beams and columns in floors, roofs, landingcomplete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in lintels up to 1.5m clear span, benching, coping, bed blocks and roof kerbs etc including use of necessary form work complete all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as item No 95 here-in-above but 5mm dia and over up to and including 10mm dia as in stirrups, spacers & binder etc.

S&F MS frame work such as grills, gratings framed guard bars barred iron doors, ladders, frame work for securing water tanks and similar work etc confirming to Fe 290 GDE E-165 complete all as specified and directed

Dismantling RCC/PCC water tanks of any description of capacity exc 250 Liters but n.exc 500 Liters and disturbed surfaces shall be made good with PCC 1:2:4 type B-1 complete all as specified & directed.

Dismantling RCC/PCC water tanks of any description of capacity exc 500 Liters but n.exc 1000 Liters and disturbed surfaces shall be made good with PCC 1:2:4 type B-1 complete all as specified & directed.

S&F PVC water tank triple layer white in colour rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted & fixed in position including connecting up pipes, nipple, union / sockets etc of capacity 1000 ltr complete all as specified and directed.

S&F PVC water tank triple layer white in colour rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted & fixed in position including connecting up pipes, nipple, union / sockets etc of capacity 500 ltr complete all as specified and directed.

S&F Ball brass valves 20mm bore high pressure with polythene float and fly nut screwed for iron pipe complete all as specified and directed.

S&F in repair gun metal gate valve screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed to pipe of 20mm bore complete all as specified and directed.

Dismantling CI work of any description and in any position complete all as specified and directed.

Dismantling of cast iron pipes any size or bore as in soil waste or vent pipe including removal of cement joints fixed to wall or laid in floor complete all as specified and directed.

S&F sand cast, cast iron soil, waste and vent pipes 100mm bore in any length with or without ears with cement joint, laid in floor or fixed to wall complete all as specified and directed.

S&F sand cast, cast iron soil, waste and vent pipes 75mm bore in any length with or without ears with cement joint laid in floor or fixed to wall complete all as specified and directed.

S&F 100mm CI Bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and as directed.

S&F 75mm CI Bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and as directed.

S&F 100mm CI Bends (any radius) with duck’s foot or heel rest complete all as specified and as directed.

S&F 100mm CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F CI Nahani trap 75mm bore with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Taking down eaves gutter or RWP of any description complete all as specified & directed.

S&F 110mm dia PVC rain water pipe single socketed with rubber joint, jointed with solvent joint fixed to wall complete all as specified & directed.

S&F PVC bends any radius 110 mm dia complete all as specified and directed.

M&L two coats of Oil bound distemper on old decorated plastered or unplastered surfaces over not less than 1mm thick acrylic wall care (Birla / JK white) putty and a coat of alkali resistant primer of walls after complete removal of existing treatment including preparation of surfaces complete all as specified and directed. Note : The work under this item shall be got carried out by contractor from authorised applicator of manufactrurer by using modern technique.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of white wash on ceiling complete all as specified and directed

M&L one coat of white wash on old decorated plastered or unplastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L for preparation of old steel surface of any description not otherwise described, exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old wooden surface of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified & directed.

Dismantling brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

Demolition of mud of any thickness including plastering and leaping whether full thickness removed or only a part there of complete all as specified and as directed.

M&L for Providing, cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate in coping, coving, roof padding, padding in sunken slab as directing mixed with liquid water proofing compound complete all as specified and directed. Note : The cost of Liquid WPC deemed to be inclusive in quoted rate.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed.

M&L for preparing cement concrete / RCC roof surfaces and providing 10mm thick modified plaster in CM 1:4 cement mixed with polymer in ratio of 1:10 (1 part of polymer and 10 parts of cement) applying priming coat of epoxy primer with resin and hardener with water dilution as per manufacturer instructions, applying two coats of solvent based polyurethane liquid membrane each coat not less than 500 micron thick UV stable having SRI value greater than or equal to 105 with consumption of 0.61 Kg/Sqm (each coat) 2nd coat should be applied once 1st coat became fully dry complete all as specified and directed. Make : Asian paints / Thermax or equivalent make as approved. Note : The work under this item shall be got carried out by contractor from authorised applicator of manufacturer by using modern technique. The contractor shall also furnish gaurantee of the quality, finish work and effectiveness of water proofing treatment under this item for a period of ten years from certified date of completion.

S&F PVC connection 15mm size, of length 450mm, with brass nuts complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches pillars etc complete all as specified and directed.

M&L brick work with sub class 'B' bricks old size straight or curved on plan exc 6mtr mean radius, built in CM (1:6) complete all as specified and directed.

All as per srl item No 125 here in above but except bricks. Note : Old bricks obtained from item No 124 shall be used.

M&L 60mm thick machine pressed precast cement concrete rubberised glossy finish interlocking paver block with using gray cement and no pigments of grage M-35 of any shape and size confirming to IS-15658-2006 such as I-Shape, unioctagenal, three X, dumble, zigzag etc laid over and including 25mm thick sand cushion complete all as specified and directed.

M&L Factory made road side kerb stone of Precast cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate of size & shape as directed, including necessary use and waste of form work if required and also including setting in cement mortar 1:6 including demolition of old kerb stone any shap size & location complete all as specified & as directed.

Demolition and breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar internal dia of pipe 150mm complete all as specified and directed.

M&L for 150mm bore Reinforced concrete pipes class NP2 laid and jointed with collars in trenches complete all as specified and directed.

M&L for concrete bed to drain pipes in PCC (1:3:6) types C-2 including cradles for 150mm bore of pipes complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shafts, wells, cesspits, man holes, pier holes etc, not exc 10 sqm on plan and n exc 1.5m in depth and getting out complete all as specified and directed.

M&L for returning filling in approved excavated soil including spreading levelling and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removing surplus soil to a distance exceeding 250m but n.exc 500m & depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Removing all disintegrated and loose concrete of any thickness including plaster if any in RCC Column, Chajja, slab, beams, lintels etc, removing all loose rust / scale from exposed reinforcement bars by using wire brushes and sand paper including cleaning of exposed surfaces of reinforcement with protective anti corrosive epoxy bonding chemical (make : Pidilite) and tied reinforcement bars / IRC fabric 50mm x 50mm x 12gauge if reqd to reinforcement concrete bonding primer uniformly to exposed surfaces and applying cement mortar 1:3:1 with MPC (1 Part cement : 3 Part Sand : 1 Part 6mm coarse aggregate) to an average thickness not less than 20 mm and removing debris outside MD land complete all as specified and directed. Note : The cost of IRC 50mm x 50mm x 12 gauge or reinforcement bars shall be deemed to be including in quoted rate.

Taking down carefully surface aluminium point wiring with wooden battens / PVC conduit (light, fan, socket, bell or power) including fittings such as switches, ceiling roses, lamp holders, pendants, sockets, regulators etc and making good disturbed surfaces complete all as specified and directed.

M&L for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated and unsheathed FRLS multistranded copper conductor cable 1.5 sqmm drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories, for mounting modular switches, sockets, fan regulators, including cutting, chasing on wall and other surfaces and finishing the surface as per existing complete for the following :- Note : Modular boxes, modular face plate and modular plate cover shall be measured separately in respective item of BOQ.

One light / fan / bell point controlled by one switch.

One socket outlet 5 pin, 6 amp controlled by one switch on indepdendent board.

One socket outlet 5 pin, 6 amp controlled by one switch on the same board.

M&L for point wiring with 1100 volts grade PVC insulated and unsheathed FRLS multistranded copper conductor cable 2.5 sqmm drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories, with earth continuty conductor with FRLS PVC insulated multistranded copper conductor cable 2.5 Sqmm complete for one 16 Amp modular socket outlet controlled by one switch on independent board, including cutting, chasing on wall and other surfaces and finishing the surface as per existing complete. Note : Modular boxes, modular face plate and modular plate cover shall be measured separately in respective item of BOQ.

S&F modular Switch 6 amp single Pole one way, one module 230 V complete all as specified & directed.

S&F modular Switch 16 amp single Pole one way, one module 230 V complete all as specified & directed.

S&F modular Socket 6 Amp two in one with shutter (Two module) out let flush type Multipurpose 230 V complete all as specified & directed.

S&F modular Socket 16 Amp two in one with shutter (Two module) out let flush type multipurpose 230 V complete all as specified & directed.

S&F modular bell push, 6 Amp one module 230 V complete all as specified & directed.

S&F Bell ding dong type AC 230 volt complete all as specified & directed.

S&F modular Lamp holder insulated body, batten / angle type complete all as specified and directed.

S&F LED bulb B22 base of capacity 10 W complete all as specified & directed. Make : Bajaj, Hevalls, C&S.

S&F modular Ceiling rose 3 terminals complete all as specified & directed.

S&F LED light rod 18/20 W only complete all as specified & directed. Make : Cat part No LT5RT1-18-CDL of Crompton or equivalent in Havells, Bajaj, Surya.

S&F LED 18/20 W batten CRCA box type only for Retro LED tube rod complete all as specified & directed. Make : Cat part no IGP131LT8-16 of Crompton or equivalent in Bajaj, Surya, Havells.

S&F LED tube light fitting complete 1x9W, (2ft long) polycarbonate batten including LED tube complete all as specified & directed.

S&F modular electronic ceiling fan regulator stepped type, 100 W, one module heavy duty suitable to work on 230 volts complete all as specified & directed.

Dismantling and refixing carefully ceiling fans of any make any sweep after servicing oiling and greasing, including one coat painting with super enamaled white paint with spray machine complete all as specified and directed.

Taking down and refixing, cleaning, greasing, oiling including one coat painting with super enamaled black paint with spray machine and servicing exhaust fan of any make or size complete all as specified and directed.

Taking down existing geyser and refixing after cleaning, oiling including one coat painting with super enamaled white paint with spray machine and servicing geyser of any make or size complete all as specified and directed.

S&F sheet metal enclosure MCCB DB VTPN 4 way with 200 amps rated bus bar 415 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 suitable for mounting MCCB / MCB DB confirming to IS-13032, IS-8623, BS-5484 having door earthing complete all as specified and directed.

S&F MCCB 125 Amp TP Breaking capacity 16 KA, (type C curve) complete all as specified & directed.

S&F MCB single pole, 240 volts, 6 Amps to 32 Amp breaking capacity 10 KA (type 'C') complete all as specified & directed.

S&F MCB SPN, 240 Volts, 40 Amps breaking capacity 10 KA (type C curve) complete all as specified & directed.

S&F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 suitable for mounting MCCB / MCB DB confirming to IS-13032, IS-8623, BS-5484 having door earthing complete all as specified & directed.

Taking down unserviceable submain wiring of size 6 Sqmm pvc insulated aluminium wire complete all as specified & directed.

M&L for Sub main wiring with 2 single core PVC insulated unsheathed cable, 1100v grade with FRLS PVC 6 Sqmm copper cable multi stranded conductor drawn through in and including PVC rigid non metallic concealed conduit 25 mm dia, medium duty, ISI Marked to be terminated in DB box as per IS including of 6 Sqmm dia FRLS PVC insulated unsheathed Copper cable as earth wire connected to earth complete all as specified & directed.

M&L for Sub main wiring with 2 single core PVC insulated unsheathed cable, 1100v grade with FRLS PVC 4 Sqmm copper cable multi stranded conductor drawn through in and including PVC rigid non metallic concealed conduit 25 mm dia, medium duty, ISI Marked to be terminated in DB box as per IS including of 4 Sqmm dia FRLS PVC insulated unsheathed Copper cable as earth wire connected to earth complete all as specified & directed.

Supplying laying, jointing, testing and commissioning of LT UG XLPE insulated screened PVC beded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volts grade complete of size 35 sqmm 3.5 core all as specified and directed. (Note :- cable may be laid in trenches, under road, across the nallah, along poles/walls and in ducts etc. Excavation, earhtwork, sand cushioing, cable cover, pipe for cable protection to be measured and paid for separtely) complete all as specified and directed.

M&L for Sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete all as specified & directed. Note : Punned thickness shall be measured.

M&L for bricks covering to under ground electric cable using sub class 'B' bricks laid dry, flat, perpendicular to the direction of the cable complete all as specified and directed.

M&L for replacement of 50 mm bore GI pipe light grade laid in trenches or fixed to wall/pole for protection of cable/earthing strip etc complete all as specified and directed.

S&F in replacement of Building security light 25 watt LED, new generation, energy saving and environment friendly long life street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP-66 protection and impact resistance of IK-07 including 0.5 Sqmm flexible copper multistranded conductor cable fixed with 40mm dia light grade 1.5m long bracket fixed with MS clamps 02 Nos made of FI 40x5mm - 02 Nos, Nut bolts, washers on wall complete all as specified and directed. Make - Cat Part No. ENDURAPEARLSL25WLED757SASYTOPC of Havells or equivalent make as specified in Appendix 'B'.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt, connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel protected by galvanised iron light grade 15 mm dia pipe and 20mm light grade for water filling including 15x20mm reducer socket funnel wire mesh, RCC cover with concrete 1:2:4 using 8 mm# bar@100 mm c/c both ways, PCC chamber pit with PCC (1:3:6) type C-2 and excavation and earth work, disposal of suplus spoil to a dstance not exceeding 50mtrs all as specified and shown on electrical plate No. 3 of 2009 (Part-I) including taking out old existing earthing complete all as specified and directed. Note :- The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level.

S&F metal flush box of 1/2 module for fixing modular switch socket complete all as specified & directed.

S&F metal flush box of 3 module for fixing modular switch socket complete all as specified & directed.

S&F metal flush box of 4 module for fixing modular switch socket complete all as specified & directed.

S&F metal flush box of 6 module for fixing modular switch socket complete all as specified & directed.

S&F metal flush box of 8 module for fixing modular switch socket complete all as specified & directed.

S&F metal flush box of 12 module for fixing modular switch socket complete all as specified & directed.

S&F modular cover plate with support plate 1/2 module for fixing modular switch socket complete all as specified & directed.

S&F modular cover plate with support plate 3 module for fixing modular switch socket complete all as specified & directed.

S&F modular cover plate with support plate 4 module for fixing modular switch socket complete all as specified & directed.

S&F modular cover plate with support plate 6 module for fixing modular switch socket complete all as specified & directed.

S&F modular cover plate with support plate 8 module for fixing modular switch socket complete all as specified & directed.

S&F modular cover plate with support plate 12 module for fixing modular switch socket complete all as specified & directed.

S&F in replacement of wall mounted decorative luminaire suitable for 1x8/9W LED B-22 cap including 1 x 8/9W LED bulb complete all as specified and directed.

S&F in replacement LED light fitting surface mounting round type complete 1x12W, (Dimension (mm) for round light : 180x40) polycarbonate batten including LED tube complete all as specified & directed.

M/s INDER CONSTRUCTION COMPANY

M/s Pioneer Construction Co.

B B BUILDERS

Siya constructions

M/s Har Nandi Construction Company

VERMA BROTHERS