Compound Walling and Additional Items of Revenue Complex at Watergam, Baramulla.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar court room additional door

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, incl Pre-laminated particle board with decorative lamination on both sides, painting, as well wood work for frames of door all complete job as per direction of Engineer-in-charge.

Providing and fixing powder-coated aluminium work (minimum 50-micron coating) for fixed portion of doors, windows, ventilators and partitions.

Providing and fixing 12 mm thick pre-laminated particle board with decorative lamination on both sides for the solid panel portion (if the lower panel is pre-laminated board

3.5mm for borken windows

Providing and fixing glazing in aluminium doors, windows, ventilators and partitions 5mm

Providing and Fixing of 50mm dia stainless steel railing of 304 grade of hallow tube 1.6 mm thick of Jindal/Salem make or equivalent including welding and fixing with stainless steel machine screws for making required size and shape, buffing etc. Complete and fixing stainless steel balusters upto 900 mm height and S S tubes, three in one installed horizontally including cutting, welding, grinding to required shape and size by required steel dash fasteners, nuts, bolts, screws ,etc. in floors and treads including providing SS shoe at each balusters complete as per architectural drawings and as per the directions of engineer incharge including cutting of granite/marble floors and fastening with lead grouting if required, complete in all respects.

Providing & fixing of stainless steel nevel post (Ornamental ) including top ball of AISI 304 grade of required height duley anchored to floor with dash fasteners . Height of the nevel post shall not be less than 1050 mm above the finished skirting level all complete as per architectural drawings (including cost of all material, leads, lifts and carriages etc upto site of work complete).Complete as per the directions of Engineer incharge.

Providing and fixing of round conference table of 3000 mm diameter (or as approved by Engineer-in-Charge), made out of 19 mm thick BWR grade block board/plywood finished with 1.0 mm decorative laminate of approved shade and make on top and vertical faces. The table shall be supported on a rigid framework of powder-coated MS frame/approved hardwood section 75 mm × 50 mm or fabricated MS frame of equivalent strength, complete with necessary bracing, supports, screws, nails, adhesives and fittings. The exposed edges shall be finished with approved PVC edge banding/hardwood lipping. The top shall be provided with veneer/laminate finish and melamine polish as directed. The table shall have a height of 750 mm and shall be 6000mm long . The item includes transportation, loading, unloading, assembling, placing in position and all incidental charges complete in all respects as directed by the Engineer-in-Charge.

Providing and fixing water proof ply wood 19 mm thick hold on single section structural steel for judge's bench including with fixing loading unloading etc complete job