Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹66.0 LAdmitted-Finance | ₹66.0 L | L1 | Admitted-Finance |
| 2 | L2₹67.0 L+₹1.0 L (1.54%)Admitted-Finance | ₹67.0 L+₹1.0 L (1.54%) | L2 | Admitted-Finance |
| 3 | L3₹67.4 L+₹1.4 L (2.14%)Admitted-Finance | ₹67.4 L+₹1.4 L (2.14%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/s K B Enterprises L1 | M/s Kuhoi Zhimo L3 | M/S SWETA ENTERPRISES L2 |
|---|---|---|---|---|---|---|
| 1.01 | Lifting and taking out complete submersible pump set 5 HP to 40 HP along with the any size of column pipes with the help of chain pulley block from borewell after disconnecting electrical & water connections with safety precaution from panel, disconnecting from suction and delivery pipe lines, disconnecting column pipes, testing electric motor to ensure its actual condition, seperating pump & motor from coupling, re-assembling and lowering pump with column pipe & motor into bore well complete, connecting, testing and commissioning alongwith connected items such as mild steel column pipe with nylon rope, cable, re-fixing with new nuts & bolts, rubber packing and other accessories such as spare parts of bush , impeller & neck ring etc., if required for smooth functioning inclusive in unit quoted rates, with proper alignment and making electrical connection including transportation of submersible pumps to and from to workshop complete all as specified and directed. Note :- Worn/ unserviceable spare parts to be replaced with new spare parts shall be measure and paid seperately under respective item . | 6 | Each job | 1,50,000 ₹1,50,000 | 1,50,000 ₹1,50,000 | 1,20,000 ₹1,20,000 Lowest |
| 1.02 | Disconnecting the all electric & mechanic connection from pump with electric motor 3 phase, 415 volts, 50 c/s any capacity of electric motor / submersible pump of any make from the set, rewinding the motor with PVC insulated copper winding wire of existing gauge and size including all other winding material such as leatheriest paper, tapes, sleeves etc and suitable size bearing , if required including and testing complete for smooth functioning and satisfied by Engineer-in-Charge & reassembling and re-fixing with true alignment and testing and commissioning complete all as specified & directed by Engineer-in-Charge. | 500 | HP | 32,50,000 ₹32,50,000 | 30,00,000 ₹30,00,000 Lowest | 30,00,000 ₹30,00,000 Lowest |
| 1.03 | Following spare parts of pump will be replaced under item No-02 as mentioned above :- Supply only upper and lower housing bushes of any material complete suitable for 5HP to 40 HP complete. | 36 | Each | 43,200 ₹43,200 Lowest | 45,000 ₹45,000 | 72,000 ₹72,000 |
| 1.04 | Supply only stainless steel bushes each set suitable for 5HP to 40 HP submersible motor complete | 30 | Each | 30,000 ₹30,000 Lowest | 45,000 ₹45,000 | 45,000 ₹45,000 |
| 1.05 | Supply only 'O' ring kit and oil seal kit suitable for 5 HP to 40 HP complete | 30 | Each | 60,000 ₹60,000 | 45,000 ₹45,000 Lowest | 54,000 ₹54,000 |
| 1.06 | Supply only thrust bearing excel carbon suitable for 5 HP to 40HP complete. | 24 | Each | 36,000 ₹36,000 | 13,200 ₹13,200 Lowest | 48,000 ₹48,000 |
| 1.07 | Supply only thrust bearing plate suitable for 5HP to 40HP complete | 24 | Each | 28,800 ₹28,800 | 20,400 ₹20,400 Lowest | 60,000 ₹60,000 |
| 1.08 | Supply only sand guard suitable for 5 HP to 40HP complete. | 18 | Each | 10,800 ₹10,800 Lowest | 27,000 ₹27,000 | 14,400 ₹14,400 |
| 1.09 | Supply only water seal suitable for 5 HP to 40 HP complete | 18 | Each | 10,800 ₹10,800 Lowest | 17,100 ₹17,100 | 13,500 ₹13,500 |
| 1.10 | Supply only gun metal bush of pump shaft suitable for 5 to 40 HP complete. | 36 | Each | 30,600 ₹30,600 Lowest | 37,800 ₹37,800 | 36,000 ₹36,000 |
Tender Value
Refer Docs
EMD Value
₹1.3 L
Closing Date
21 Nov 2023, 10:30 amClosed
SO-I(Wks)
SO-(Wks) ARTC and School Shokhuvi
Additional/Alteration incl repair/maint/replacement of submersible/monoblock pump sets, motor starters and connected wiring wks incl augmentation of external electric supply at ARTC S Dimapur
2023_ARMHA_779860_1
28028/ARTCS/Engr/NIT/23-24/48
Open Tender
Civil Works
Works
365 days
Shokhuvi
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,500
Commandant, ARTC and School
₹1.3 L
9 Feb 2024
8 Nov 2023
22 Nov 2023
9 Nov 2023
21 Nov 2023
9 Nov 2023
9 Nov 2023 - 20 Nov 2023
Lifting and taking out complete submersible pump set 5 HP to 40 HP along with the any size of column pipes with the help of chain pulley block from borewell after disconnecting electrical & water connections with safety precaution from panel, disconnecting from suction and delivery pipe lines, disconnecting column pipes, testing electric motor to ensure its actual condition, seperating pump & motor from coupling, re-assembling and lowering pump with column pipe & motor into bore well complete, connecting, testing and commissioning alongwith connected items such as mild steel column pipe with nylon rope, cable, re-fixing with new nuts & bolts, rubber packing and other accessories such as spare parts of bush , impeller & neck ring etc., if required for smooth functioning inclusive in unit quoted rates, with proper alignment and making electrical connection including transportation of submersible pumps to and from to workshop complete all as specified and directed. Note :- Worn/ unserviceable spare parts to be replaced with new spare parts shall be measure and paid seperately under respective item .
Disconnecting the all electric & mechanic connection from pump with electric motor 3 phase, 415 volts, 50 c/s any capacity of electric motor / submersible pump of any make from the set, rewinding the motor with PVC insulated copper winding wire of existing gauge and size including all other winding material such as leatheriest paper, tapes, sleeves etc and suitable size bearing , if required including and testing complete for smooth functioning and satisfied by Engineer-in-Charge & reassembling and re-fixing with true alignment and testing and commissioning complete all as specified & directed by Engineer-in-Charge.
Following spare parts of pump will be replaced under item No-02 as mentioned above :- Supply only upper and lower housing bushes of any material complete suitable for 5HP to 40 HP complete.
Supply only stainless steel bushes each set suitable for 5HP to 40 HP submersible motor complete
Supply only 'O' ring kit and oil seal kit suitable for 5 HP to 40 HP complete
Supply only thrust bearing excel carbon suitable for 5 HP to 40HP complete.
Supply only thrust bearing plate suitable for 5HP to 40HP complete
Supply only sand guard suitable for 5 HP to 40HP complete.
Supply only water seal suitable for 5 HP to 40 HP complete
Supply only gun metal bush of pump shaft suitable for 5 to 40 HP complete.
Supply only impeller bush of gun metal suitable for 5 to 40 HP complete.
Supply only neck ring of impeller as per existing size suitable for 5 to 40 HP including necessary lathe work complete all as specified and directed by Engineer-in-Charge.
Repair of bowl bush of housing by proper machine work of housing and pump shaft & replacement of bowl bush for 5 to 40 HP complete all as specified and directed.
S&F for replacement jointing the submersible cable by means of jointing material & making the leak proof jointing complete all as specified and directed by Engineer-in-Charge.
S & F Iin repair contractor 3 pole, ML4 (2NO + 2 NC) current rating 70Amp Make- L&T
S & F Iin repair contractor 3 pole, ML3 (2NO + 2 NC) current rating 40Amp Make- L&T
S & F in replacement , connecting, testing and commissioning fully Automatic Star Delta Starter in sheet steel enclosure type MN 16F with single phase protection suitable for 25HP, 3 Phase, 415 volts, 50 HZ, having all standered accessories complete all as specified and directed. MAKE: Shneider/ L&T/ Legrand/ Standard.
S & F in replacement , connecting, testing and commissioning fully Automatic Star Delta Starter in sheet steel enclosure type MN16F with single phase protection suitable for 40/50HP, 3 Phase, 415 volts, 50 HZ, having all standered accessories complete all as specified and directed. MAKE: Shneider/ L&T/ Legrand/ Standard.
Disconnecting the electric connection of unserviceable centrifugal monoblock pump , transporting to work shop for repair, disconnecting the all electric & mechanic connection from pump with electric motor 3 phase, 415 volts, 50 c/s of capacity 40HP of electric motor / submersible pump of any make from the set, rewinding the motor with super enamelled copper winding wire of existing gauge and size including all other winding material such as leatheriest paper, tapes, sleeves etc, Bush,'O' ring, Sand guard, water seal and suitable size bearing if required including varnishing, heating, drying and also repair/ replacement of spair parts of pump such as bowal busg, gun metal bush, neck ring and testing complete for smooth functioning and satisfied by Engineer-in-Charge & reassembling and re-fixing with true alignment and testing and commissioning complete all as specified & directed by Engineer-in-Charge.
Disconnecting the electric connection of unserviceable centrifugal monoblock pump , transporting to work shop for repair, disconnecting the all electric & mechanic connection from pump with electric motor 3 phase, 415 volts, 50 c/s of capacity 20HP of electric motor / submersible pump of any make from the set, rewinding the motor with super enamelled copper winding wire of existing gauge and size including all other winding material such as leatheriest paper, tapes, sleeves etc, Bush,'O' ring, Sand guard, water seal and suitable size bearing if required including varnishing, heating, drying and also repair/ replacement of spair parts of pump such as bowal busg, gun metal bush, neck ring and testing complete for smooth functioning and satisfied by Engineer-in-Charge & reassembling and re-fixing with true alignment and testing and commissioning complete all as specified & directed by Engineer-in-Charge.
Disconnecting the electric connection of unserviceable centrifugal monoblock pump , transporting to work shop for repair, disconnecting the all electric & mechanic connection from pump with electric motor 3 phase, 415 volts, 50 c/s of capacity 15HP of electric motor / submersible pump of any make from the set, rewinding the motor with super enamelled copper winding wire of existing gauge and size including all other winding material such as leatheriest paper, tapes, sleeves etc, Bush,'O' ring, Sand guard, water seal and suitable size bearing if required including varnishing, heating, drying and also repair/ replacement of spair parts of pump such as bowal busg, gun metal bush, neck ring and testing complete for smooth functioning and satisfied by Engineer-in-Charge & reassembling and re-fixing with true alignment and testing and commissioning complete all as specified & directed by Engineer-in-Charge.
Disconnecting the electric connection of unserviceable centrifugal monoblock pump , transporting to work shop for repair, disconnecting the all electric & mechanic connection from pump with electric motor 3 phase, 415 volts, 50 c/s of capacity 10HP of electric motor / submersible pump of any make from the set, rewinding the motor with super enamelled copper winding wire of existing gauge and size including all other winding material such as leatheriest paper, tapes, sleeves etc, Bush,'O' ring, Sand guard, water seal and suitable size bearing if required including varnishing, heating, drying and also repair/ replacement of spair parts of pump such as bowal busg, gun metal bush, neck ring and testing complete for smooth functioning and satisfied by Engineer-in-Charge & reassembling and re-fixing with true alignment and testing and commissioning complete all as specified & directed by Engineer-in-Charge.
Disconnecting the electric connection of unserviceable centrifugal monoblock pump , transporting to work shop for repair, disconnecting the all electric & mechanic connection from pump with electric motor 3 phase, 415 volts, 50 c/s of capacity 7.5HP of electric motor / submersible pump of any make from the set, rewinding the motor with super enamelled copper winding wire of existing gauge and size including all other winding material such as leatheriest paper, tapes, sleeves etc, Bush,'O' ring, Sand guard, water seal and suitable size bearing if required including varnishing, heating, drying and also repair/ replacement of spair parts of pump such as bowal busg, gun metal bush, neck ring and testing complete for smooth functioning and satisfied by Engineer-in-Charge & reassembling and re-fixing with true alignment and testing and commissioning complete all as specified & directed by Engineer-in-Charge.
Disconnecting the electric connection of unserviceable centrifugal monoblock pump , transporting to work shop for repair, disconnecting the all electric & mechanic connection from pump with electric motor 3 phase, 415 volts, 50 c/s of capacity 5HP of electric motor / submersible pump of any make from the set, rewinding the motor with super enamelled copper winding wire of existing gauge and size including all other winding material such as leatheriest paper, tapes, sleeves etc, Bush,'O' ring, Sand guard, water seal and suitable size bearing if required including varnishing, heating, drying and also repair/ replacement of spair parts of pump such as bowal busg, gun metal bush, neck ring and testing complete for smooth functioning and satisfied by Engineer-in-Charge & reassembling and re-fixing with true alignment and testing and commissioning complete all as specified & directed by Engineer-in-Charge.
Disconnecting the electric connection of unserviceable centrifugal monoblock pump , transporting to work shop for repair, disconnecting the all electric & mechanic connection from pump with electric motor 3 phase, 415 volts, 50 c/s of capacity 2HP of electric motor / submersible pump of any make from the set, rewinding the motor with super enamelled copper winding wire of existing gauge and size including all other winding material such as leatheriest paper, tapes, sleeves etc, Bush,'O' ring, Sand guard, water seal and suitable size bearing if required including varnishing, heating, drying and also repair/ replacement of spair parts of pump such as bowal busg, gun metal bush, neck ring and testing complete for smooth functioning and satisfied by Engineer-in-Charge & reassembling and re-fixing with true alignment and testing and commissioning complete all as specified & directed by Engineer-in-Charge.
S&F in repair submersible cable heavy duty PVC insulated and sheathed 06 sqmm size 3 core conductor flat fully water proof 1100 volt grade complete all as specified and directed. Make :- HAVELLS/FINOLEX/PLAZA
S&F in repair submersible cable heavy duty PVC insulated and sheathed 2.50 sqmm size 3 core conductor flat fully water proof 1100 volt grade complete all as specified and directed. Make :- HAVELLS/FINOLEX/PLAZA
Providing and fixing GI rope wire of 10mm dia (heavy duty) for support of submersible motor complete all as specified and directed.
Supply and lay pipe galvanised 'Heavy class incl fitting 63mm (2½") dia incl cost of laying , jointing etc complete.
M & L for MCCB, four pole, 415 Volts breaking capacity 25 KA with adjustable thermal range capacity 100 Amp confirm to IS/ IEC 60947-2 including taking down existing MCCB & making arrangements for fixing the MCCB all as directed by Engineer-in-Charge.
M & L for MCCB, four pole, 415 Volts breaking capacity 25 KA with adjustable thermal range capacity 63 Amp confirm to IS/ IEC 60947-2 including taking down existing MCCB & making arrangements for fixing the MCCB all as directed by Engineer-in-Charge.
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 3.25 M deep below GL with top edge of plate not less than 1.5 M below GL) connected with GI strip 25mm x 4mm as earthing lead by means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, 40mm bore GI pipe light grade ISI marked for protection of GI strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1 chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade ISI marked for watering all as shown in electrical plate No. 3 of SSR Part-I and connected to earth test point including testing including dismantling of old ineffective earthing complete all as specified and directed. (Note:- The rates quoted shall also deemed to include the cost of Earth test point and earth strip and protection pipe upto 7.5 meter beyond the earth plates electrode and the earth resistance of the whole system shall be as near as possible to 0 but shall not in any case exced two ohm.)
S&F in repair 200 mm bore sluice valve heavy duty both ends flanged and drilled type nominal pressured rating PN-1, conformed to IS 780 of 1980 complete with cast iron body bonnet wedge stuffing box galvanished thrust plate, spindle made of high tensile stainless steel cast iron hand operated wheel with cap top nuts, bolts. washes wedge nut body seal ring and wedge facing run lead tin braise, compressed fibre bolts and nuts, gland packing of superior quality including 6mm thick rubber gasket joint compelet all as specifed and directed by Engineer-in-Charge. MAKE: Leader , Kirloskar & Upadhyay
S&F in repair 100 mm bore sluice valve heavy duty both ends flanged and drilled type nominal pressured rating PN-1, conformed to IS 780 of 1980 complete with cast iron body bonnet wedge stuffing box galvanished thrust plate, spindle made of high tensile stainless steel cast iron hand operated wheel with cap top nuts, bolts. washes wedge nut body seal ring and wedge facing run lead tin braise, compressed fibre bolts and nuts, gland packing of superior quality including 6mm thick rubber gasket joint compelet all as specifed and directed by Engineer-in-Charge. MAKE: Leader , Kirloskar & Upadhyay
S&F in repair 80 mm bore sluice valve heavy duty both ends flanged and drilled type nominal pressured rating PN-1, conformed to IS 780 of 1980 complete with cast iron body bonnet wedge stuffing box galvanished thrust plate, spindle made of high tensile stainless steel cast iron hand operated wheel with cap top nuts, bolts. washes wedge nut body seal ring and wedge facing run lead tin braise, compressed fibre bolts and nuts, gland packing of superior quality including 6mm thick rubber gasket joint compelet all as specifed and directed by Engineer-in-Charge. MAKE: Leader , Kirloskar & Upadhyay
M/S SWETA ENTERPRISES
M/s Kuhoi Zhimo
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .