Supply and installation of tool plant machinery for upgrading of Transformer repair workshop at Chadoora in ED Budgam KPDCL.

Amount

Supply and Installation of HT Coil Winding Machine Front tension upto 1000 kVA as per the following specifications 1. Range of wires : 10 to 26 SWG 2. Maximum coil diameter : 400 mm 3. Layer width : 300 mm 4. Winding speeds : 90, 180, 360/ as per cust.req. 5. Height of center over floor : 1000 mm 6. Motor : 2H.P/three phase 7. Traverse : Semi Automatic The machine should be complete With 5-figures reset turn counting meter, Electric Motor (Crompton Greaves), Reverse switch and Complete with powder coated/Synthetic Enamel paint etc.

Supply and Installation of LT Coil Winding Machine upto 1000 kVA as per the following specifications 1. Maximum coil diameter : 1000 mm 2. Maximum Distance between centers : 1200 mm 3. Winding Speeds approximate : 23,36,56 rpm. 4. Diameter of face plate : 450 mm 5. Height of centers over floor : 1000 mm 6. Load capacity between centers : 400 kg 7. Motor H.P/K.W/R.P.M/A.C :2/1.5/1440 8. Phase :Three The machine should be complete With tail center adjustable, 5-figures reset turn counting meter, Contactor L & T make, Reverse Switch , Footswitch , Electric Motor (Crompton Greaves), Complete with powder coated / Enamel paint etc.

Supply and Installation of Cutting/ Shearing Machine as per the following specifications 1.Cutting Blade Size - 48” 2.Floor Size - 1200 mm x 1200 mm 3.Height - 36 Heavy Duty Hand Operated Shearing Machine to cut insulation_Paper/Board upto 3mm thickness,Table mounted hand operated shearing machine. One attachment is fitted with the machine for adjusting the press board cutting length. One handle is fitted with the blade for cutting the board smoothly. One foot Paddle is also incorporated with the machine foe a clumping the press board cutting.

Supply and Installation of Air Compressor Capacity 3 HP as per the following specifications Motor - 3 H.P Operating Pressure - 7 Kg/cm Free Air Delivery - 3.89 CFM Air Receiver - 100 Ltr Tank Capacity - 90 Ltr. The machine should have all the necessary accesories plus numetaic spanner, air regulator and air release safety valve.

Supply and Installation Portable Welding Machine 10-250 Amp. as per the following specifications. Welding current range - 10-250 Amp. Duty cycle 60%/100% - 250A/194A Open Circuit Voltage - 45V. Input voltage -220V +/- 5%. Frequency- 50 Hz. Cooling- Forced Air Natural. Insulation class-H. Type of output current regulation- Rotary pin Type mode.

Supply and Installation of Drill Machine Heavy Duty as per the following specifications Drilling Diameter- 13-23 mm fitted on a stand. Operating voltage- 215-230V. Noload speed - 560 rpm

Supply, installation and commissioning of Hydraulic Trolley (2.5 tonnes Handlift Pallet Truck Heavy Duty)Capacity (kg) : 2.5 tonnes Max Fork Length : 1150mm Min Fork Width : 160mm Outside Fork Spread : 550mm Inside Fork Spread : 230mm Maximum Fork Height : 230mm Lift : 115mm Lowered Fork Height : 85mm Head Length : 415mm Overall Length : 1540mm Overall Height : 1220mm Truck Weight : 66kg Load Roller Diameter x width : 70x60mm Steering Wheel Diameter x width : 180x50mm

Supply and Installation of Oil Testing Machine 0-60 KV.

Supply and Installation of Centrifuging Machine capacity 750 gallon as per following specifications 1. The Plant will be suitable for treating transformer oil by first heating it & then passing it through specially designed filters and then subjecting it to vacuum treatment, which dehydrates and degasifies the oil to following specification. Parameters Before Processing After Processing Break Down Voltage 20 kV 70 kV Moisture Content 50 PPM <5PPM Suspended particles Many Particles 1 Micron Gas Content 10% by Vol. < 0.1% Oil filtration will be designed for HIGH VACUUM – LOW TEMPERATURE processing of oil for achieving better results. 2. The plant will generally conform to IS-6034-1989 and its latest revision. 3. The oil filtration plant will be designed for high vacuum and low temperature of oil for achieving required results. 4.The plant offered will be Portable Type Mounted on Four Caster Wheels.

Supply and Installation of Kirloskar make 25 KVA Diesel Generator set including chemical earthing of the unit with provision for Manual change over 63 Amp with providing of requisite length of 50mmsq 3.5 core cable with following specificatons: Make Kirloskar, 25 KVA, 3Phase,415V,3Cylinder,Fuel Capacity 75 Ltr, Engine Engine 37BHp,RPM 1500, Alternator Insulation Class H, Model No.KEC E25 II 25 KVA Aircooled & Water Cooled.

Overhauling of 500 gallons filtration plant by way of replacement of power packs and damaged contractors with rectification of vaccum compartment at workshop chadoora.

Overhauling of electric hoist by way of replacement of ML Contractors of desired capacity with providing of 12 core PVC cable of desired size standard make for making position controller functional. Rectification/ Rewinding of 3-Phase 0.8 Kw 2.3 Amp moving motor. The piston wire/ siling wire of the hoist to be replaced by 0.75 inch cross-section.

Upgradation of Oven by replcaement of heating elements and providing of control pannel with digital voltmeter,digital ammeter, digital temperature meter, ML4 Contractor with AC pick up voltage, short circuit protection and temperature controller upto 100 degree celsius,

Supply and Installation of LED lights of capacity 120 watts with all necessary accessories.

Renovation of Workshop Washroom by way of installation of Geyser 50 Ltr. & Other necessary sanitary fittings

Supply and Installation of 3-Phase 3-HP monoblock pump with flexible rubber pipe (30 mtr long) oil resistant and temperature resistant upto 150 degree celsius type.

Supply and installation of battery charger 48 V DC, 80 Amps DC output. (Copper Wound) along with Batter bank of 24 No.(2 volt each) with specification 5HR 443AH, Cell Type Exide make TLF17

NOTE: 1.The rates quoted by the bidder for all the line items shall be inclusive of GST/freight/insurance/storage/testing and any other charges FOR workshop at Chadoora of ED Budgam.