SPECIAL REPAIR TO BUILDING NO. P 239 AND

Amount

NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates. SCHEDULE 'A' PART-I (B/R WORK)

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.50m wide and n. exc 1.50m in depth and getting out soft/loose soil complete all as specified and directed.

Returnng, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M & L for PCC type D2 1:4:8 (40 mm graded agg) in foundations, filling and mass concrete complete all as specified and directed.

M & L for hardcore of gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface in broken stone or boulders complete all as specified and directed.

Dismantling stone slabs of any description laid, bedded and pointed in any mortar complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (un reinforced) in floor and paving n exc 15 cm thick (above or below GL) complete all as specified and directed

M & L for Rendering 10 mm thick cement plaster in CM 1:3 on fair faces of brick Work for fixing of wall tiling complete all as specified and directed.

M & L for 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes for vitrified tiles, kota stone, etc. complete all as specified and directed.

M & L for Vitrified ceramic light shade tiles 10 mm thick area of each tile exc 0.18 sqm not exceeding 0.36 sqm in floors etc set & jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and directed. (Kajaria/Somany/Orient/Johnson)

-Ditto- all as per item No 1.012 above but as in skirtings.

M & L for Non Skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set & jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.

S & F for joint free non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, complete all as specified and directed.

M & L for Glazed ceramic coloured tiles 450 x 350 x 7 / 350 x 250 x 7 mm thick white or coloured tiles as in dado, skirting and vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles complete all as specified and directed. (Kajaria/Somany/Orient)

M & L for 20(+/-2) mm thick machine cut kota stone slab flooring over screed bed laid jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per Sl item no 1.017 here and above but on skirting

M & L for PCC 100 mm thick PCC 1:4:8 type D-2 ( Using 40 mm graded aggregates), for laying as sub base of floor finishes etc complete all as specified and directed.

M & L 25 mm thick PCC 1:2:4 type B-1 ( Using 20 mm graded aggregates), in floor and to receive tiles complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection finished even and smooth without usisng extra cement complete all as specified and directed.

M & L for 75 mm thick PCC type D-2 1:4:8 (40mm graded agg) as in sub base of floor complete all as specified and directed.

Demolition of re-inforced cement concret of any position not otherwise specifically provided for complete all as specified and directed.

M & L for RCC 1:2:4, type B-1 (using 20 mm graded aggregates) as in chajjas and similar suspended work in any situation complete all as specified and directed.

Reinforced cement concrete (Nominal mix) Plinth beams type B1 1:2:4 (20 mm graded aggregate) complete all as specified and directed.

Reinforced cement concrete (Nominal mix) Lintel Bands type B1 1:2:4 (20 mm graded aggregate) complete all as specified and directed.

RCC 1:2:4 20 mm graded aggregate nominal mix for slabs supported on walls, beams and columns in floors, roofs, landings balconies canopies, desk slabs and in shelves and the like complete all as specified and directed.

Form work to chajja, weather shades, cooking platform, shelves incl fair finish surface of the concrete slab.etc complete all as specified and directed.

Use and waste of form work to sides and soffits of floor or roof beams lintles cantlevers, shelves incl supports etc for rough finished surface of concrete complete all as specified and directed.

Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick

High strength steel deformed TMT bars (Fe 500D) 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips.

High strength steel deformed TMT bars (Fe 500D) 6 mm to 8 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips.

High strength steel deformed TMT bars (Fe 500D) 5mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders, cut to length, bent to shape required including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips.

M & L for running welding for new reinforcement with old reinforcement for binding exc 6mm but not exc 9 mm thickness complete all as specified and directed.

M & L for one coat Nito bond EP applied on old concrete surface by brushing or spraying before placing new concrete .(it is required for bonding new concrete & old concrete).

M & L two coats of "Pidifin 2K " (Dr. Fixit) applied on external surface of brick wall before plastering as per manufacturere's instruction.

M & L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 all as specified and directed

Brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius as Half brick wall built in CM 1:4 complete all as specified and directed.

Taking down chowkath or frame exc 1.5 sqm n exc 4 sqm with shutter ( without taking of shutters from frames ) complete all as specified and directed.

Taking down chowkath or frame n exc 1.5 sqm with shutter ( without taking of shutters from frames ) complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) conisiting of frame made out of M S tubes for top and bottom rails. MS frame shall be covered with heat moulded both side Prelaminated PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges, Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for top rail, lock rail and bottom rail complete all as specified and directed.

S & F solid PVC door frame of size 50 mm x 50 mm made out of 5 mm sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing.

S & F steel ventilator with top hung shutter including hinges, steel peg stay, complete.

Supply and Fixing powder coated aluminium frame for doors, windows & ventilator with one or more rebates including joining cleat for fixing etc. complete all as specified. Make- Jindal/Hinadalco

Supply and Fixing powder coated aluminium window and ventilator shutter , aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber packing, to recieve glass/wiremesh , screws , anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) in each shutter complete all as specified & as directed

Supply and Fixing powder coated aluminium door shutter of aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminium snap beading, screws etc including necessary fittings and fixes of handles,hinges,tower bolt complete all as specified & directed

S & F 12 mm thick veneered block board interior garde , solid core , general purpose type, with face veneers of type BB fixed with screw to timber frame work complete all as specified and directed.

S & F 12 mm thick prelaminated particle board , interior garde , prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work for cup board shutters/writting table all as specified and directed. .Make-Kitply/Greenply/National

S & F for 75 x 75 mm mesh size aluminium anodised grill of DG -916 made with 10 mm thick aluminium square bar fixed to aluminium window complete all as specified and directed. (Make - Deco grill)

Supply & Fixed 4.80 mm thick plain sheet glass exc 0.5 sqm in each pane fixed to aluminium door,window & ventilator complete all as specified and directed. Make-Saintgobin/Modi guard/Atul

S & F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

M & L for one coats of aluminium painting to old painted steel surfaces including preparation of surfaces area exc 10cm width & girth not otherwise described complete all as specified and directed.

S & F 125mm long extruded Aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S & F 150mm long aluminium anodized barrel tower bolts of extruded section and fixed.

S&F 100 mm size stainless steel butt hinges medium weight , cold rolled and fixed.

Butt hinges, extruded aluminium alloy with galvanised 100 mm long mild steel hinge pin, anodised and fixed, type B-21

S & F 125 mm size alumunium handle, cast type, anodised complete all as specified and directed.

S & F Aluminium alloy anodized handles fabricated type 125 mm long

S & F 300 mm long Aluminium alloy anodised sliding door bolts with hasp,staple (bolt type) complete all as specified and directed.

S & F 140 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring , fixed in floor.

Taking down cement plaster on wall; ceiling,etc incl racking out joints hacking for keys, scrubbing with etc complete all as specified and directed.

M & L for Rendering 15 mm thick cement plaster with WPC @ 3% of weight of cement on external surfaces of brick work in CM 1:4 andn surface to be finished even & smooth without using extra cement. (WPC will be measured and paid separately).

Supply only WPC

M & L for Rendering 5 mm thick cement plaster in CM 1:3 on fair faces ceiling , Chajja, shelves and surface to be even and fair complete all as specified and directed.

M & L for Rendering 15 mm thick cement plaster on internal surfaces of brick work in CM 1:6 andn surface to be finished even & smooth without using extra cement complete all as specified and directed.

M & L for Preparation of old plastered surfaces of walls and applying one coats of white wash complete all as specified and directed.

M & L for Preparation of old plastered surfaces of ceiling and applying one coats of white wash complete all as specified and directed.

M & L for Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for applying two coats acrylic distemper (oil bound distemper) over a coat of alkali resistant wall primer incl preparation of surfaces on new plaster surface complete all as specified and directed.

Removing completely existing treated surface and applying two coats of acrylic distemper (oil bound distemper) over a coat of wall primer incl preparation of surfaces complete all as specified and directed.

Complete removal of existing treatment and applying two coats of exterior emulstion (weather coat) on external wall surface over a coat of primer and acrylic wall putty 1.5 mm thick as directed by Engr-in-charge.

Preparation of new plaster surface of wall and apply two coats of exterior emulsion (weather coat) over a coat of primer over a coat of ready made wall putty 1.5 mm thick on external surface all as specified and directed.

Preparation of new plaster surface of wall and apply two coat sof exterior emulsion paint over a coat of wall putty 1.5 mm thick on external surface complete all as specified and directed.

M & L for two coats of synthetic enamel painting to new steel surfaces over a coat of red oxide zinc chrome including preparation of surfaces area exc 10cm width & girth.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for roof treatment using APP based polymeric membrane minimum weight 3.5 kg/sqm and 3 mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) over a coat of primed and bonding surface by forced application, including taking down old felt complete all as specified and directed by Eng-in-charge.

M & L for avg 25 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof paddding / base for receive tile complete all as specified.

M & L for Rendering 10 mm thick cement plaster in CM 1:4 on roof surface complete all as specified and directed.

Chequered cement concrete tiles 20cm x 20cm x 25mm/ 30cm x 30cm x 25mm thick, pre-polished set, jointed and pointed in neat cement slurry with grey/colour cement and pigment in floors complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board slabs etc any thickness including cover fillets complete all as specified and directed.

Material & labour for false ceiling with GI frame work for EXPOSED GRID SYSTEM of grid size 600 mm x 600 mm, GI powder coating at bottom and comprising of GI perimeter wall angle with two equal flanges of 25 mm fixed to surrounding wall / partition using nylon sleeves and screws at 450 mm centre to centre. Main Tee 0.70 mm thick having 35 mm wide flange and 25 mm high web suspended from the soffit @ 1200 mm centre to centre with level clip with wire of 4 mm dia, Cross Tee - 1200, 0.70 mm thick having 35 mm wide flange and 25 mm high web inserted fixed into the slots of Main 'T' @ 600 mm centre to centre to form a grid of 1200 mm x 600 mm, Cross Tee - 600, 0.70 mm thick having 35 mm wide flange and 25 mm high web shall be placed perpendicular to the Cross Tee - 1200 to finally form a grid of 600 mm x 600 mm duly suspended with 2 to 3 mm dia GI wire hangers fixed with steel dash through fasteners from purlins / ceiling with butterfly clips, hold down clips, etc. complete all as per manufacturer instructions.

S & F for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions and as specified and directed.

M & L applying two coats of acrylic distemper (oil bound distemper) over a coat of priming plastered and other surfaces with alkali resistant priming paint on ceiling incl preparation of surfaces in new plaster surface complete all as specified and directed.

M & L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed.

M & L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors

Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 15 mm bore complete all as specified and directed.

Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 20 mm bore complete all as specified and directed.

S & F for 25 mm outer dia PPR polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stabilised & antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls,ceiling or in floor etc complete all as specified and directed.

S & F for 20 mm outer dia PPR polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stabilised & antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls,ceiling or in floor etc complete all as specified and directed.

S&F Galvanised steel water tubing 15 mm bore, medium grade with all fittings (such as bends, elbows, tees, short plugs and union etc.) and fixed complete (concealed) to wall/in chases and ceiling or laid in floors including fixing complete.

S&F Galvanised steel water tubing 20 mm bore, medium grade with all fittings (such as bends, elbows, tees, short plugs and union etc.) and fixed complete (concealed) to wall/in chases and ceiling or laid in floors including fixing complete.

Cutting chases in walls or concealed water tubing and making good in CM 1:3 exc 10 cm but n.exc 20cm girth complete all as specified and directed.

Dismantling water tanks exc 500 litres and n exc 1000 litres complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top), double layer, hoisted and fixed in position all as specified in SSR Part I of capacity 500 litre complete all as specified and directed.

S & F in repair PVC ball valves high pressure with polythene float and fly nut complete, screwed for iron pipe of 20mm bore

S & F PVC ball valves high pressure with polythene float and fly nut complete, screwed for iron pipe of 20mm bore in repair ( PRAYAG).

S & F in repair 15 mm dia fancy type CP bib taps, cast copper alloy with crutch or butterfly handle, screwed down complete all as specified and directed.

S & F 15 mm dia fancy type CP bib taps, cast copper alloy with crutch or butterfly handle, screwed down fixed.

S & F in repairs 15 mm dia CP pillar taps, cast copper alloy with capstan head, chromium plated screwed down fixed high pressure, long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F 15 mm dia fancy type CP pillar taps, cast copper alloy with capstan head, chromium plated screwed down fixed high pressure, long screwed shanks and fly nuts, screwed for iron pipe

S & F stop valve 15mm bore cast copper alloy screwed down high pressure fixed to iron pipes or for unions.

S & F in repairs 15 mm dia CP concealed type stop valves/ angular stop valves , cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions complete all as specified and directed.

S & F Gun metal 20 mm bore dia of pipe globe or gate valve with iron wheel head screwed both ends for iron pipe

S & F PVC grating doom 100 mm dia complete all as specified and directed.

S & F PVC connection pipe 15mm size with PTMT nuts 450mm long complete all as specified and directed.

Taking down rainwater pipes including all fittings complete all as specified and directed.

S & F for PVC (SWR) pipes of dia 110mm single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 MM PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors

S & F 110 x 75 mm PVC (SWR) reducer

S & F 110 mm PVC (SWR) junction single (Single T) equal or unequal with access Door

S & F 110 mm PVC (SWR) bends

S & F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors

S & F 75mm PVC (SWR) vent cowl

PVC (SWR) floor trap 75mm dia, plain with gratings including jointing with solvent cement

PVC (SWR) Gully trap 125/110 mm , setting and jointing with solvent cement complete all as specified & directed.

S& F in repairs PVC (SWR & RWP) floor trap plain with grating inclu. Jointing with solvent cement of out let dia 75mm complete all as specified and directed.

S & F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat white closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32 mm dia for low level flushing cistern complete all as specified and directed.

S & F wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete

S & F in repairs PVC valve less symphonic action type flushing cistern 10 ltr capacity low level white with inlet ball valve , float flush pipe and handle including bracket complete all as specified and directed.

S&F of PVC valveless, dual flush, syphonic action type, flushing cistern 10 ltr capacity low level white with inlet ball valve float and handle incl brackets incl necessary fittings.

S & F in repairs vitreous china wash hand basin white, flat back, size 550x400 mm with brackets including cutting for and pinning in end of brackets and waste coupling,waste pipe etccomplete all as specified and directed.

S & F vitreous china wash basin, white, flat back size 630x450mm, incl cutting for and pinning in ends of brackets or erecting stand but excl taps, pvc conections but incl brackets & Waste Pipe.

S & F in repairs Vitreous China Urinal, full stall type, white (excluding flushing cistern, incl flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S & F vitreous china urinal half stall type white(excluding flushing cistern (including flush pipe & Waste coupling) complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe

S & F in repairs glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard railing 60 cm long complete all as specified and directed.

S & F glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard railing 60 cm long

PVC connections 15mm size with PTMT nuts of length 300 mm complete all as specified and directed.

S & F 15 mm size PVC connections with PTMT nuts of length 450 mm

S & F in repairs brass chromium plated shower rose 125 mm size fixed complete all as specified and directed.

S & F in repair aluminium anodised tubular towel rail 20mm dia "D" type 60 cm long between flange complete all as specified and directed.

S&F aluminium anodised tubular towel rail 20mm dia "D" type 60 cm long between flange.

S & F in repair CP soap case complete all as specified and directed.

S & F CP soap case complete all as specified and directed.

S & F for soap container of PTMT fixed with and incl chromium plated brass screws and wooden/plastic cleat.

S & F in repair for 20 mm dia stainless steel curtain rod complete all as specified and directed.

S & F in repair for fancy curtain rod bracket complete all as specified and directed

M & L for health faucet with 1 meter tube & hook (Braded Tube) CAT No BEA - 40S) or equivalent.

SCHEDULE 'A' PART-II (INTERNAL ELECTRIFICATION WORK)

Taking down carefully copper /aluminium point wiring (light, fan socket or power) complete, including fixture and fittings such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light / fan point controlled by one 5/6 amps, one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for for one 5/6 amps socket outlet on same board controlled with other switch complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 5/6 amps socket outlet on independent board controlled with one, oneway switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 4 Sqmm (phase & neutral) and one run of 2.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 15/16 amps socket outlet on independent board controlled with one, 15/16 amps one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

Supply and fixing including connection of switch piano flush button type single pole one way 5 Amps (Make:Anchor/Cona/Roma)

Supply and fixing including connection of switch socket combination 5 Amps,2 in 1, 2/3 pin flush type.(Make:Anchor/Cona/Roma)

Supply and fixing including connection of switch socket combination, 5 in 1,3 pin 5/16 amps flush type universal.(Make:Anchor/Cona/Roma)

Supply and fixing of ceilings rose of PVC polycarbonate isolated body three terminals (Make:Anchor/Cona/Roma)

Supply and fixing of Step type electronic fan regulator flush type on the existing phonolic laminated sheet etc. as required. (Make:-Anchor/Cona/Roma)

Taking down unserviceable sub main /Sub circuit wiring of any type and size including conduit, batten wiring for necessary repair/replacement.

Supply and fix sub-main wiring with PVC insulated & unsheathed two run of 6 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 6 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through in pvc concealed conduit 20 mm bore heavy grade complete all as specified and as directed by the Engr-in-Charge.. Note : (i) Two runs of 6 Sqmm and one run of 6 Sqmm cable and one run of PVC conduit shall measured as one length.

Supply and fix sub-main wiring with PVC insulated & unsheathed two run of 4 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 4 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through in pvc concealed conduit 20 mm bore heavy grade complete all as specified and as directed by the Engr-in-Charge.. Note : (i) Two runs of 4 Sqmm and one run of 4 Sqmm cable and one run of PVC conduit shall measured as one length.

Supply and fix sub-main wiring with PVC insulated & unsheathed two run of 2.50 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 2.50 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through in pvc concealed conduit 20 mm bore heavy grade complete all as specified and as directed by the Engr-in-Charge.. Note : (i) Two runs of 2.5 Sqmm and one run of 2.5 Sqmm cable and one run of PVC conduit shall measured as one length.

Taking down old serviceable Ceiling fan including carrying out servicing and painting one with coat of synthetic enameled paint by spraying including filling cavities with filler, one coat cleaning all dust etc & writing necessary MES No at two places on the the fan and refixing fan in its own position after completion of necessary ceiling work

Supply and fixing Highly robust industrial Box type LED extruded Batten type indoor decorative type luminaire suitable for LED Tube 2 x 16/20 watt (4ft ) complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed. ( Make /Model No :-IGP162LT8-16( ECO-I )of Crompton or equivalent of Bajaj/JaguarPhillips)

S & F LED Polycarbonate T8 Tube with in built driver with metal heat sink double sided connection of capacity 1x 20 watts all as specified and directed,Make/Model No:-LT8-20-865-(2) ULTRON of Crompton or equivalent of Bajaj/ Phillips/ Jaquar

Supply & fixing Building security light fitting of capacity 30 watt,new compact designed made up of pressure die cast housing with toughened glass for the most effective thermal management IP 66,with highly effective and efficient lighting solution high power LED Building Security light .including provn of necessary connection complete including taking down old building security light.(Make/ Model:- LSTS-30-CDL-M (ASTRA NEO) of Crompton or equivalent of Bajaj/Phillips.

Supply and fixing of VTPN DB double door,IK 09,IP43-Metal door, 4 way, made of CRCA sheet steel ,RAL 9003,powder coated with bus bar, neutral link, earth bar withprovision for DU125A MCCB,4 pole as incomer and SP/TP MCBs as Outgoings, including taking down old one.( Make/Model- DBVTL004DD of L&T or Equivalent of HPL/LEGRAND.

S&F MCCB 4 pole, 125 Amps, for Incomer of VTPN with fixed thermal & magnetic release of breaking capacity 30kA,DU125H , 415 Volts.(Make: L&T,Cat No.CM90679OOLO orLegrand / HPL)

Taking down serviceable / unserviceable switch fuse unit/MCB DB with MCB etc for necessary repair/replacement and reuse all as directed by Engineer in Charge.

Supply and fixing of MCB DB double door, made of sheet steel phosphates, powder painted with bus bar, neutral link, earth bar and din rail SPN 8 way with 200 Amps rated bus bar 240 Volts including taking down.(Make:Standard/C&S/Havells)

S & F MCB 40 Amps SPN `C' series ,Make:L&T or Standard/Legrand.

S & F MCB 40 Amps SP `C` series,Make:L&T or Standard/Legrand.

S & F MCB 06 to 32 Amps SP `C` series,Make:L&T or Standard/Legrand.

Supply and fixing in repair of GI pipe Bracket of 40 mm dia light grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed. (Make of GI pipe- Jindal/Prakash/Tata)

M&L for earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6.0 mm buried directly in ground (earth pit not less than 2.25 Mtr below normal ground level ) connected to galvanized earth lead strip of size 25 mm x 3 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel including 40 mm dia medium grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm dia, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type C1, 50 mm thick precast RCC (1:2:4) type B1 pit cover reinforced with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including galvanised strip of size 25 mm x 3 mm for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a disance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate No. 3 of SSR Pt-I including taking down old one , and all as directed and specified

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drwan in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc.as required 25x4 mm dia galvanised iron strip all as specified and directed.

RANA ENTERPRISES

MS SUBHAM ENGINEERING AND CO

DS ENTERPRISES

Bidder Name

RANA ENTERPRISES

DS ENTERPRISES

MS VIDYANJALI

MS SUBHAM ENGINEERING AND CO