PERIODICAL SERVICES AND MISC REPAIRS IN ZONE III IVA AND IVB OF VARIOUS UNIT AT LEKHAPANI UNDER GE DINJAN NO 02

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water & removal of debris off the premises etc. complete all as specified & directed.

M&L for rendering 15mm thick in CM 1:4 in brick/concrete surfaces up to 8 Mtr height of building, finished even and smooth without using extra cement all as specified and directed

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick/concrete surfaces , including finishing the top surfaces even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of new plastered or unplastered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying two coat of acrylic based distemper emulsion of any tint/shade over a coat of primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

M&L Prepration of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of acrylic based distemper emulsion of any tint/shade including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed..

Material and labour for preparation of old plastered or unplastered surfaces of walls by washing, rubbing down and stopping of existing finishes and painting the surface by applying two coats of cement base paint complete of any tint/shade including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed..

M&L for complete removal of existing treatment on wall etc and applying two coats of acrylic based distemper emulsion of any shade/tint over and including a coat of 1 mm thick wall care putty including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of walls , chajja, facia & roof projection including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of ceiling including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

Material and labour for preparation of old surfaces of walls , chajja , facia , roof projection ncluding filling the cracks / holes and applying one coat of cement base paint , white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of walls by washing and rubbing down ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of acrylic exterior emulsion paint weather proof on old decorated surfaces of walls , chajja, facia & roof projection including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

Material and labour for preparation of old painted wooden /wood based materials surfaces of any description, not otherwise described, over 10 cm width or girth and painting with one coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removing all dropings etc. all as specified and as directed

Material and labour for preparation of old painted steel and iron surfaces of any description , not otherwise described ,over 10 cm width or girth and painting with one coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removing all drops etc. complete all as speciified and as directed.

Dismantling boarding, any description fixed in any position with nails complete all as specified & directed

M&L for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.

Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5sqm each and making good to disturbed surfaces and removing from site of work complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkat or frame with shutters (without taking off shutters from the frame) exceeding 1.5sqm but not exceeding 4.0sqm each and making good to disturbed surfaces and removing unserviceable materials from site of work complete all as specified and directed by the Engineer-in-Charge.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each. Complete all as directed.

Taking down shutters of any description n.exc 1.00 sqm each and refixing in the same opening after easing, adjusting etc. complete all as directed.

S&F 125 x 60mm pressed steel frames 1.25mm thick for doors,windows with one or more rebates incl necessary fixing lugs,hinges lock, strike plate etc. complete all as directed.

S&F 105x60mm pressed steel frames 1.25mm thick for doors,windows with one or more rebates incl necessary fixing lugs,hinges lock, strike plate etc. complete all as directed.

S&F steel ventilators (Factory made) fixed type complete with glazing bars dovtailed or welded complete all as directed.

S&F 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a); complete fixed to frame all as specified & as directed.

S&F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides & fixed to chowkats complete all as specified & directed.

S & F for aluminum powder coated (poder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831) bottom of size 92 x 31.72 x 1.50mm (Soction of 20832) and shutter top & bottom of size 40 x 18 x 1.55 (section 20738) and lock side shutter frame of size 40 x 15 x 1.45mm (Section 20737) with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified

S&F framed work such as griils, grating, angle iron door frames etc., with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, laders, framed balusters, walk ways, railings frame work of water tanks and similar work conforming to Fe-290. Gde E-165 complete all as specified & as directed.

S&F Aluminium powder coated door shutter single / double leaf, side hung type on floor door spring (to be paid sepratly) 44.45mm wide (two panels) fabricated having hanging and meeting style 58.00 mm X 44.45 mm X 1.8mm thick, top rail 83.50 mm X44.45 x 1.62 mm thick, middle rail 83mmx44.45mmx1.70mm thick and bottom rail 95.25 mm X 44.45mm X 1.70 mm thick and including jointing cleats, aluminium anodised snap beading, screws, aluminium anodised fitting such as pair of 'D' type handle 250mm long (decorative type), tower bolts 150 mm long 1 Nos for each leaf, aluminium beading, PVC packing,5mm thick sheet glass, locking arrangement with mort ice lock 6 lever, 1Nos floor door stopper and necessary fitting & fixtures complete all as specified and directed.

M&L for prparing new wood & wood basd surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, and painting with two coats of synthetic enamel paint (Ist Quality ) on CGI sheet of roof upto double storey building including necessary scaffolding including cleaning , stopping and rubbing down and removing all drops etc. complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed.

S&F 200 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed.

S&F 250mm length of bolt, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & as directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel & fixed complete all as specified & as directed.

S&F mild steel 300mm size, ordinary rat tail rod pattern springs, including roller and roller plate complete fixed to wooden shutter all as specified and as directed.

S&F 125mm size aluminium handles, cast type, anodized and fixed complete all as specified & as directed.

S&F Floor door stopper doubled leged of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as directed.

Dismantling timber scantlings in unframed timber work 40 sq.cm and over in section, in any position complete all as specified and as directed.

M&L for second class hardwood, scantlings, wrought, fixed in unframed work complete as specified and directed.

Dismantling wall and celling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified & directed

Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605mm x 605mm in true horizonatal level, hot dipped galvanised steel sections consisting of main “T” runner with suitably spaced joints to get required length and size 24mm x 38mm made from 0.30mm thick (Min) sheet spaced at 1200mm centre to centre and cross “T” of size 24mm x 28mm made of 0.30mm thick (Min) sheet, 1200mm long spaced between main “T” at 600mm centre to centre to form a grid of 1200mm x 600mm and secondary cross “T” of length 600mm and size 24mm x 28mm made of 0.30mm thick (Min) sheet to be interlocked at middle of the 1200mm x 600mm panel to form grids of 600mm x 600mm and wall angle of size 24mm x 24mm x 0.4mm. Main “T” runner to be suspended from ceiling using 4mm GI rods, 1200mm x 600mm centre to centre all complete for all heights as per specifications and as directed by Engineer – in - Charge.

M & L for 4 mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation ad acoustic purpose to be placed in grid system duly suspended with 2 to 3mm dia GI wire hangers fixed with steel dash through fasteners from purlins with butterfly clips, hold down clips with provision of high fixtures, air conditioning, diffuser and ducts, sprinkler, smoke detector etc, complete all as per manufacturer instructions complete all as directed.

S&F MS chromium plated curtain rod 25 mm dia , with and including MS chromium plated decorative round finials on either end provide a visually balanced appearance including MS chromium plated brackets fixed to wall with 30 mm wooden steel screws and PVC rawl plug, anchors, and installation as in repair complete.

M&L for 2.5 to 3mm thick sun board with laminated vinyl sheet incl screen printing of bldg No / Qtr No as per sample kept in GE Office of size 250mm x 150mm each incl fixing upto 2nd floor height incl necessary PVC rawl plug and SS screws of 25mm long complete all as directed.

Hacking out old broken glass (any thickness, size, quality or description), from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fixing 2.5mm to 3mm thick PVC transparent/frosted window panes ordinary quality and glazing with oil putty / wooden beads as required in squares n exc 0.5sq. m in each pane complete all as specified and as directed

ADNEEDS ENTERPRISE (BID ID -3319174)