REPAIR TO JOINERY, PLUMBING WORK, ROOF AND OTHER B AND R NATURE WORKS IN POCKET A AND B AT BASOLI GRN UNDER GE BASOLI.

Amount

Demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 meter mean radius built in cement sand mortar (1:6) complete all as specified and as directed.

Ditto- all as per Srl item No. 2 here-in-before, but except bricks.

Taking down cement plaster of any description including raking out joints, hacking out for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 finished fair and even without using extra cement, complete all as specified and as directed.

M&L for rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted walls and applying one coats of oil bound distemper, complete all as specified and as directed.

M&L for preparation of old surfaces of wall and applying two coats of white/colour wash, complete all as specified and as directed.

M&L for preparation of new or old surfaces of wall and applying 1mm thick wall care putty of JK/Birla white , complete all as specified and as directed.

M&L for preparation of old surfaces of wall and applying one coat of cement base paint on wall surfaces, complete all as specified and as directed.

M&L for preparation of old surfaces of wall and applying one coat of Apex emulsion paint as in walls/roof projection/chajjas, complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description exc 10 cm width or girth, and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description exc 10 cm width or girth, and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection laid in bays complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed.

M&L for Non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed neat cement slurry and pointed in white or coloured cement to match Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified.

M&L for Non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed neat cement slurry and pointed in white or coloured cement to match Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified.

M&L for Glazed ceramic tile 450x350x7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick bedding layer in cement and sand mortar 1:4 complete all as specified and as directed.

Dismantling of AC/CGI/Galvalume sheets corrugated or semi-corrugated in roof covering including ridges, hips, valleys and flashings etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description all as specified and directed

Refixing old Structural steel work (any description obtained from dismantling) as in roof truss etc, complete all as specified and as directed.

S&F structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality B including two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated sheet 0.50mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in ridge or velly on roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F 6mm thick AC corrugated or semi-corrugated sheets, in roofing fixed with new J-hooks/L-hooks/cranked hook bolts etc. complete all as specified and as directed.

S&F in repair with new Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc , complete all as specified and as directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and pipe) complete fixed in repair, all as specified and as directed.

S & F in repair for PVC low level flushing cistern, valve less, symphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, complete all as specified and as directed.

S&F in repair Vitreous china Urinal, Half stall type, white ( excluding flushing cistern, flush pipe and waste pipe), with grating and union for discharge pipe , complete all as specified and as directed.

S&F in repair Vitreous china wash basin, white, flat back, size 550x400mm including pillar tap, waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe and pillar tap etc, complete all as specified and as directed.

S&F in repair PVC connection 15 mm size, of length 450 mm, with PTMT nuts, complete all as specified and as directed.

S&F in repair PVC connection 15 mm size, of length 600 mm, with PTMT nuts, complete all as specified and as directed.

S&F in repair stainless steel gratings 100/125mm dia and fix in position with cement mortar, complete all as specified and as directed.

S&F in repair waste pipe for WHB/Urinal for 32/40mm dia all as specified & as directed.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed.

Supply and fix for steel water tubing galvanised, 15mm bore, medium grade with all fittings and fixed to walls, including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed.

Supply and fix for steel water tubing galvanized, 20 mm bore, medium grade with all fittings and fixed to walls, including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and as directed.

Refixing old steel tubing with new connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings, complete all as specified and as directed.

Refixing old steel tubing with new connections in new or old position on walls, ceiling or floors etc of size 20 mm bore after cleaning including provn of new fittings, complete all as specified and as directed.

Supply and fixed in repairs CP angle valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, complete all as specified and as directed.

Supply and fixed in repairs bib taps, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, complete all as specified and as directed.

Supply and fixed in repairs pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, complete all as specified and as directed.

S&F in repair Ball valves, high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball, screwed for iron pipe 25 mm dia (minimum weight 210 gms) complete all as specified and as directed.

S&F in repair Ball valves, high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks of 1000 Liters capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified.

S&F Rotational moulded polyethylene water storage tanks of 500 Liters capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but n. exc 4.0 Sqm each and removing from site complete all as specified and as directed.

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and as directed.

Taking down and refixing incl resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed.

S&F Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and as directed .

S&F Pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and as directed.

M&L for PCC 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) as in filling of pressed steel frame, complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and as directed.

S&F panelled factory made shutter,35mm thick, IInd class hard wood plain, framed, panelled (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 35 mm thick, 2nd class soft wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified.

S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified.

S&F butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed.

S&F 250mm long aluminum alloy anodized sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminum alloy, ISI marked complete all as specified.

S&F 200mm long, aluminum anodized, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed.

S&F aluminum handles cast type anodized of size 150mm long ISI marked complete all as specified and as directed.

S&F Door closer of aluminum (Die cast body), hydraulically regulated, designation No 2, universal type, suitable for door shutters of weight between 36 to 60 Kg, ISI marked, complete all as specified and as directed.

S&F 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and as directed.

S&F in repair Steel windows/ventilator (Box type) factory made glass/glazed shutter, (glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron including box type hinges with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 100mm long and 10mm square bar grills complete all as specified and as directed.

S&F hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads complete all as specified and as directed.

S&F 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square meter in each pane complete all as specified and as directed.

S&F 3.0 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square meter in each pane complete all as specified and as directed.

S&F Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F in repair Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

S&F Mild steel framed work as in grills, grating etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description exc 10 cm width or girth, priming with red oxide primer and painting with two coats of synthetic enamel paint complete all as specified and directed.

M&L for Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified.

S&F powder coated anodized aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F in repair powder coated (thickness of coating not less than 50micron) anodized aluminum door shutters/ windows , aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, 5.5mm thick glass (glass shall be measured and paid separately), rubber neoprene packing, aluminum handle 2 Nos in each door, aluminum hinges, anodized aluminum snap beading screws etc complete all as specified and as directed.

Taking down and refixing in position of aluminum door shutter of any size and any description and making functional by way of repair/replacement of floor spring, hinges, lock, rubber packing etc as required, complete all as specified and directed.

Dismantling of CI pipe/pvc pipe of any dia bore in any location, complete all as specified and as directed.

Fixing only in repair 110 mm dia PVC (SWR) soil , waste and vent pipes in any length with or without ears, with cement joints, fixed to walls with CI/MS holder bat clamps complete all as specified and directed.

Fixing only in repair 75 mm dia PVC (SWR) soil , waste and vent pipes in any length with or without ears, with cement joints, fixed to walls with CI/MS holder bat clamps complete all as specified and as directed.

S & F PVC bends of 75 mm dia complete all as specified and as directed.

S & F PVC bends of 110 mm dia complete all as specified and as directed.

S & F PVC Branch pieces75 mm all as specified and directed

S & F PVC Branch pieces110 mm complete all as specified and as directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall panneling including of fixing on to wall over and including PVC frame as per specification and manufacturer instruction complete all as specified and directed.

S & F 5mm thick wood grain or other colour printed PVC sheet in strips & channel feathered at the edges for fixing on solid PVC frame( the cost of PVC frame is included in quoted rates) to fix as wall lining ,insulated PVC wall lining and solid PVC partitions including of solvent ,Brass screw ,plugs, cement to fix in position at site complete all as specified.

S & F CP Mixer leg to be replaced in existing mixer all as specified and directed.

S & F in repair, CI 20mm dia tank nipple, complete all as specified and directed.

S & F in repair, CI 15mm dia tank nipple all as specified and directed.

S & F mirror mounted on good quality PVC frame or wooden frame overall size 600mmx450mm all as specified and directed .

S & F in repair for vitreous china wash down one piece water closet Pan (EWC) Italian collection (RENE star white )of size 59cmx36cm x71cm (pedestal pattern )complete series ,white including Vitreous china flushing cistern (in built with EWC) & plastic water closet seat white closed pattern with flat bottom and cover and MS chromium plated or aluminum hinges device including connection to drain (outgoing pipe) and to flush pipe ,antisyphonage pipe etc complete all as specified and directed Make CERA Cat No S101316or equivalent in CERA, Hindware.

Repair to steel rolling shutter without Ball Bearing/ gear operator type and repair of locks, hold fast etc and repair of any type of accessories as per site requirement and making them open able easily all as specified and directed.

BALKRISHAN GUPTA AND SONS

Ms International Engineers

M/S YASH PAUL RAINA AND CO

Ms Dalip Kumar and Co.