REPAIR AND MAINT OF ROAD WITH MICROSURFACING AND ROAD FURNITURE IN AOR OF AGE B/R-I UNDER GE NARANGI

Amount

Providing and laying micro surfacing laid with CRRI certified mobile cold mix paver micro surfacing paver machine as per Morth specification (Section-514) & IRC SP 81-2008 Type-II (8mm thick) complete all as specified and directed

M & L for repair to potholes, any depth not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 50 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) complete all as specified and as directed.

Material and labour for preparation of surfaces by brushing with wire brushes for removing caked mud dirty particle old paint etc, sweeping with brooms and finally fanning the cleaned surface and all crack fillong with crack fillong compound complete all as specified and directed.

Material and labour for crack fillong with crack filling compound of black top or concrete surface complete all as specified and directed.

Material and labour for providing premixed bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) rolled and compacted to required camber and gradient complete all as specified and directed.

Material and labour for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags or compressed air to remove all loose, dirt, etc. and applying evenly tack coat of cationic bituminous Emulsion (RS-1) confirming to IS 8887 at a rate of application of 3.5 kg/10 Sqm on bituminous surface as specified in table 500-3 of MORTH specification of road and bridge work 2013 complete all as specified and directed.

Material and labour for providing bituminous premixed carpet 40mm consolidated thickness with 0.54 cum of stone chippings mixed with 29.20 Kg of binder (paving bitumen of grade VG-30) per 10 Sqm, rolled and compacted to required camber and gradient etc. complete all as specified and directed.

Material and labour for premixed sand seal coat using paving bitumen @ 6.8 Kg per 10 Sqm, blinded with 0.06 Cum of sand and well rammed (paving bitumen of grade VG-30), rolled with 8 to 10 tonne power roller to uniform smooth surfaces complete all as specified and as directed.

Material and labour of bituminous surfaces of road and marking 2.5mm thick center lines or other lines, stop lines, dashes arrows etc. and the like not exceeding 10cm wide on road pavements with hot applied thermo plastic road marking paint of approved colour conforming to BS 3262-1989 with glass grit @ 300 gms/Sqm over painted surfaces while the painting surfaces are hot with special application machine all as per manufacturers instruction complete all as specified and as directed.

Supply and fix in repair solar cat eye of minimum size 125mm x125mm x 25mm (shank 65 mm) made from aluminium alloy and solar powered by mono-crystalline solar panel 2.4 V/0.3 Watt with one high capacity Ni-Cd rechargeable battery(1.2V/1600MA) and provided with superbright LEDs of 10000 to 18000 mcd(Millicandela), 3 pieces each side and total 6 pieces for high brightness with charging time of 5-6 hours and backup of 3 to 4 days of continuous light all as specified and directed by Engr-in-Charge.

Supply and fix in repair two way reflective road stud minimum dimension of 110 x 128 x 30 mm plastic body reflective panel of amber red or white colour provided at site as per manufacturer instructions complete all as specified and as directed.

M/S SWMKHWR ENTERPRISE