CONSTRUCTION OF ADDITIONAL THREE CLASS ROOMS / LABS IN VIJAYANTHA MODEL HIGHER SECONDARY SCHOOL, HVF ESTATE

Amount

Demolition of reinforced Concrete structure of any description

M & L for R.C.C A1 Type, 1: 1.5: 3 M20, 20mm graded aggregate in columns, pillars, piers, posts and struts etc (concrete work should be use of Ready Mix Concrete (RMC) of M/S.ULTRA-TEC / M/S. BIRLA / M/S.RAMCO / M/S.ACC / M/S.COROMANDAL. / M/S.RMC.(minimum cement content shall be 350kg per cum) or suitably equivalent make.

M & L for R.C.C A1 Type, 1: 1.5: 3 M20, 20mm graded aggregate in beams, cantilevers, bressummers, lintels over 1.50m span etc., (concrete work should be use of Ready Mix Concrete (RMC) of M/S.ULTRA-TEC / M/S. BIRLA / M/S.RAMCO / M/S.ACC / M/S.COROMANDAL. / M/S.RMC(minimum cement content shall be 350kg per cum) or suitably equivalent make.

M & L for R.C.C A1 Type, 1: 1.5: 3 M20, 20mm graded aggregate in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like.etc.(concrete work should be use of Ready Mix Concrete (RMC) of M/S.ULTRA-TEC / M/S. BIRLA / M/S.RAMCO / M/S.ACC / M/S.COROMANDAL. / M/S.RMC.(minimum cement content shall be 350kg per cum) or suitably equivalent make.

Supply and fixing of mild steel reinforcement deformed or twisted bars 10mm dia and over including bending, cranking, hooking and tieing with mild steel wire not less than 0.90mm dia. Used RINL-VIZAG Steel/SAIL/TATA-TISCON/"BIS"MARKED or suitably equivalent make.

M & L for form work to side of RCC Member such as columns, pillars etc., and the finishing shall be of fair finished surface.

M & L for form work to sides and soffits of floor or roof beam, beam, lintels, cantilevers, shelves, columns, slabs including supports, overhangs etc., and the finishing shall be of fair finished surface.

M & L for form work to soffits rough finish surfaces of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) and the finishing shall be of fair finished surface.

M & L for Brick work built in CM.1:6 using Good quality modular bricks / solid Concrete bricks Bricks.straight or curved on plan exc 6m mean radius.

M & L for half Brick wall built in CM.1:4 using Sub-Class “B” Bricks.

M & L for plastering in CM 1:4, 15mm thick on fair faces of brick work and concrete surfaces.

M & L for plastering in CM 1:4, 12mm thick on RCC Ceiling.

Material and labour for two coats of exterior emulsion paint on surfaces of any description over 10cm girth or width, not otherwise described including preparation of new painted surface with one coat of primer. (ASIAN/NEROLAC/ BERGER or suitably equivalent make.

Material and labour for two coats of interior emulsion paint on surfaces of any description over 10cm girth or width, not otherwise described including preparation of new painted surface with one coat of primer.(ASIAN/NEROLAC/BERGER or suitably equivalent make.

M & L for white washing two coats on ceiling on newly prepared wall surfaces.(ASIAN/NEROLAC/BERGER or suitably equivalent make.

S&F of Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 1:3, 15 mm thick for laying floor finishess.

S & F of Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.Fe-410-W(Gde-E-250)quality A.

M & L for painting to steel surfaces of any description over 10cm width or girth with two coats of synthetic enamel paint over a coat of red oxide primer including preparing new surfaces.

S & F of II class hard wood door frame, wrought framed rebated on the solid rounded or chamfered put together with glue pined at joints.

S & F of plain, framed, paneled door shutters 40mm thick made out of II class hard wood.

S&F of glazed and skeleton window shutter 35mm open rebated and prepared to receive glass gauge with II class wood

Supply and Fixing of sheet Glass 5.50mm quality and glazing with oil putty in square exc 0.5Sqm in each pare ground or obscured or tinted on one side and as approved and as directed by EIC.

M & L for painting to wooden surfaces of any description over 10cm width or girth with two coats of synthetic enamel paint over a coat of pink primer including preparing new wooden surfaces.

S & F of 125mm Aluminium Butt hinges, extruded aluminium alloy anodised and fixed, type B-21

S & F of 100mm Aluminium Butt hinges, extruded aluminium alloy anodised and fixed, type B-21

S & F of 150mm Extruded aluminium alloy handles, fabricated type, anodised

S & F of 100mm Extruded aluminium alloy handles, fabricated type, anodised

S & F of 150mm Alumium anodized barrel tower bolt.

S & F of 100mm Alumium anodized barrel tower bolt.

Cutting holes in brick walls built in cement mortar Exc.half brick work but not exc.one brick for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required.

S & F of Aluminium Aldrop bolt 300mm long with hasp, staple (Bolt type) and fixing clips.

Material and labour for providing a cement concrete (1:2:4) layer average thickness 40mm using B-0 type concrete with 12.5mm graded aggregate and finishing the surface even and smooth without using extra cement.

Material and labour for precast cement concrete (1:2:4) jallies 35 mm thick using B-0 type concrete with 12.5mm graded aggregate and set in cement mortar 1:6.

Material and labour for cement concrete 1:2:4 Type B1 20mm graded aggregate in foundation filling and mass concrete.

S & F of PVC 110mm dia Pipes single socketed, in any length with rubber ring joints laid in trenches or in floors.

S & F of PVC 110mm dia Pipes single socketed, in any length with rubber ring joints fixed to walls.

S & F of PVC Bend 110mm dia any radius.

PVC (SWR) reducers 110mm dia any radius.

Supply and fixing of holdfast made out of 25 X 6 mm flat fixed to window frame. Fe-290 Gde-E-165

Supply and Fixing of door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring

Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

Material and labour for Point wiring with 1.5sqmm PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 2mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 1.5/2.5 sq.mm multistrand copper earth continuity wire. (Make: Orbit/ Kundan/ Finolex/ Polycab or suitably equivalent make) a)one light point or one fan point controlled by one switch with cables1.5 sqmm size.

Material and labour for Point wiring with 1.5sqmm PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 2mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 1.5/2.5 sq.mm multistrand copper earth continuity wire. (Make: Orbit/ Kundan/ Finolex/ Polycab or suitably equivalent make) b)One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sqmm size.

Material and labour for Point wiring with 1.5sqmm PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduuit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 2mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 2.5 sq.mm multistrand copper earth continuity wire. (Make: Orbit/ Kundan/ Finolex/ Polycab or suitably equivalent make) c)One 3 pin socket outlet 5 amps independent, with cables 2.5 sqmm size.

Supply and fixing and connecting to the system modular switch, 1 way, 10A, 1 Module (Make:,LEGRAND MYRIUS/ Litaski/ Crabtree or suitably equivalent make)

Supply and fixing and connecting to the system of Modular socket, 6A-2/3 pin combined, 2 module (Make: LEGRAND MYRIUS/ Litaski/ Crabtree or suitably equivalent make)

Supply and fixing and connecting to the system modular switch one way 16A, 1 module (Make:,LEGRAND MYRIUS/ Litaski/ Crabtree or suitably equivalent make)

Supply and fixing and connecting to the system of Modular socket, 6/16A-2/3 pin combined modular, 2 module (Make:,LEGRAND MYRIUS/ Litaski/ Crabtree or suitably equivalent make)

Material & Labour for ceiling rose, 3 Phase/PVC/polycorbonate, isolated body (ANCHOR / LEGRAND/ HAVELLS or suitably equivalent make)

Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in PVC conduit and accessories in surface/recessed as required. (Make: Orbit/ Kundan/ Finolex/ Polycab or suitably equivalent make) a) 2x2.5 sqmm + 1x2.5 sqmm earth wire

Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in PVC conduit and accessories in surface/recessed as required. (Make: Orbit/ Kundan/ Finolex/ Polycab or suitably equivalent make) b)2x4.0 sq. mm + 1x4.0 sq. mm earth wire

Material and labour for Brick walls cutting chases,pining in, making good to facing where required and pointing in cement mortor 1:3 to ends and cutting chases for concealed conduit wiring, etc., and making good,cutting exc. 10 cm but not exc. 20 cm grith.

Supply & fixing of modular white cover plate with frame 2 module

Supply & fixing of modular metal flush box for 2 module plate

Supply & fixing of 4 module modular white cover plate with frame

Supply & fixing of modular metal flush box for 4 module plate

Supply & fixing of 6 module modular white cover plate with frame

Supply & fixing of modular metal flush box for 6 module plate

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Make:Usha/ crompton/ atomberg/ havells/ orient or suitably equivalent make)

Excavating in trenches hard dense soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying cable.

Material & labour for sand filling for cushioning on U.G cable

Material &labour for Bricks; common burnt clay building bricks sub class B designation 75 for protection to U.G cable

Returning, refilling of hard dense soil in the excavated trench after laying of power cable including spreading levelling, watering and well ramming in layers not exc 25 cm.

Supply, laying or fixing with suitable clamps or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm, 4 core.(Make: ORBIT/Polycab/ Finolex/ Havells/ NICCO or suitably equivalent make)

Demolition of cement concrete / Bitumen road of any description and in any position not otherwise specifically provided for

Material & labour for cement concrete 1:2:4 Type B1 using 20mm graded aggregate in foundations, filling and mass concrete

Supply, fixing & connecting to the system of Sheet metal enclosures with double door DB's when MCB'S to be used Triple pole & neutral 4 way with 200 Amps rated busbar,415V. (Make: Legrand/Havells or suitably equivalent make)

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning. TP (Triple pole) 25 To 63 AMP (Make: legrand/ havells/ ABB or suitably equivalent make)

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. (Make: LEGRAND / HAVELLS/ABB or suitably equivalent make)

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. (Make: PHILIPS / CG /Havells / Wipro or suitably equivalent make)

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.(maximum). (Make: PHILIPS /GE/ WIPRO /CG/OSRAM /BAJAJ/ HAVELLS/ SYSKA or suitably equivalent make)

Supply & fixing of galvanised steel tubes, medium grade 80mm dia

Supply and fixing of Galvanised steel tube Medium Grade 32 MM

Supply & fixing of 12 module plate with frame and metal flush box

Supply & fixing of 16 module plate with frame and metal flush box

Supply & fixing of modular type Dummy plate

Supply, fixing and connecting to the system modular type switch one way 20A, Single pole 2 module. (Make:LEGRAND MYRIUS/ Litaski/ Crabtree or suitably equivalent make)

Supply & fixing of MCBDB 4 way(DPX160+12) legrand make asper legrand 2010 catlogue No.607790. or ABB / Havels or suitably equivalent make)

Supply, fixing & connecting of the system cable end termination of size 25 sqmm 4 core including with suitable cable gland & lugs.

DEEPAM ENTERPRISES (BID ID -845590)

SRI LAKSHMI INDUSTRIES (BID ID -843413)

Sri Krishna Agencies (BID ID -845481)

S VINAYAGAMURTHY (BID ID -845714)