Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹53.5 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹59.9 L+₹6.2 L (11.5%)Rejected-Finance AT PO DERA COLLIERY TALCHER DIST ANGUL ODISHA PIN 759103 | ANUGUL | ODISHA | 759103 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹74.3 L+₹20.6 L (38.3%)Rejected-Finance | L3 | Rejected-Finance Not being lowest |
Tender Value
₹77.3 L
EMD Value
₹1.1 L
Closing Date
27 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Prayagraj
HQ CWE New Cantt Prayagraj
SPECIAL REPAIR TO ROADS NEAR CANDIDATE LINES ADM AREA AND GTO GROUND AT SCE AND JOGINDER SINGH AND NARBAHADUR ENCLAVE AT NEW CANTT UNDER GE (WEST) PRAYAGRAJ.
2023_MES_613410_2
81769/W/E8
Open Tender
Civil Works
Item Rate
180 days
Prayagraj
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE (West) Prayagraj
₹1.1 L
Yes
23 Dec 2023
6 Oct 2023
3 Nov 2023
6 Oct 2023
27 Oct 2023
13 Oct 2023
Amount
M&L for repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 30 mm in depth, making good by applying tack coat @ 5 Kg per 10 Sqm with paving bitumminous primer VG-10 grade and putting required (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5.5% paving binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller for pot holes exc 30mm depth complete all as specified and directed.
M&L for scrapping of the bituminous road n.exc to 150mm thickness above or below ground level complete all as specified and directed.
M&L for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 Sqm and depth exc 50mm but n. exc. 100mm and stacking complete all as specified and directed.
M&L for 150mm thick (compacted thickness) WBM with coarse aggregates of grading 2 (63 to 40mm size) or grading 3 (50 to 20mm size), in two layers of 75mm thick each using granite, trap or basalt stone aggregate, spread, rolled and consolidated to gradient and camber required using 8 to 10 tonne power road roller complete all as specified and directed.
M&L for preparing unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying evenly a priming/tack coat paving bitumen VG-10 grade with bituminous primer at 10 Kg per 10 Sqm complete all as specified and directed.
M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bituminous primer VG-10 grade @ 5 Kg per Ten Sqm on black top road surface and applying 30mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5% paving bitumen binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller complete all as specified and directed. NOTE: (i) Bituminous premix asphaltic semi dense concrete work shall be executed as per design mix as approved by GE. (ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to Government. (iii) Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver. complete all as specified and directed.
M&L for premix bituminous macadam laid (except aggregate matrial), rolled and compacted to required gradient and camber using binder (paving bitumen VG 30 grade) with 4% by weight of total mix all as specified (consolidated thickness 75 mm or less) all as specified in particular specifications. Note:- (i) The quoted rate shall be worked out on the basis of binder contents (bitumen VG-30 grade) of 4% by weight of total mix. (ii) Work shall be executed as per design mix as approved by GE and less bitumen shall be deducted from the quoted rate.
M&L for cleaning dirt, oil/ grease spots and foreign materials etc, from road surface and applying 2.5mm thick thermo plastic (retro reflective) road marking paint for marking white traffic lines, straight or curved, having clear and sharp edges over road surfaces by using thermo plastic paint applicator machine and necessary T&P, including cleaning of roads surfaces, heating the paints within temperature limits specified by the manufacturer, making proper arragement for traffic during operation etc. complete all as specified and directed. Make: Asian/ Nerolac/ Berger Paints. NOTE: (a) Thermo plastic paint material shall consist homogeneously composed of pigment, resins and glass reflecto rizing beads in required proportion as per MORTH specification and conforming to relavent IS. (b) The Contractor will made proper arrangement for traffic diversion and safety rules during laving of painting on Roads.
S&F in repair solar stud alumininum alloy powered with high efficiency solar monocrystalline solar panel (3.0 V/0.3 watt) Ni-MH rechargeble battery (1.2V/1.3AH) with 6 super bright LEDs 8mm, flash rate 60 to 70 times per minute normally, dimension-125mmx125mmx25mm (shank 67mm) including adhesive for fixing arrangement complete all as specified and directed. Make :- Dark eye Model DA 110 or Sinar Infrasture or equivalent make as approved by GE.
S&F in repair solar stud alumininum alloy powered with high efficiency solar monocrystalline solar panel (2.4 V/0.3 watt) one Ni-MH or Ni-cd rechargeble battery (1.2V/1600 MA) with 6 super bright LEDs, with 10000 to 18000 Mcd (Milicandela), dimension-125mm x125mmx25mm (shank 60mm) including adhesive for fixing arrangement complete all as specified and directed. Make :- Dark eye Model DHRUV.
S&F in repair 1.2m long delinator made of MS pipe 47mm outer dia, 900mm height from top surface of PCC, duly powder coated , covered with 4 nos of retro reflective high intensity HIP grade tape, in red, yellow white and green in colour of size 100 mm wide from top and mesh of 16 guage fixed from the top to cover this bands of reto reflective taps including necessary excavation and earth work in any type of soil and fixed in PCC block (1:2:4 type B1 using 20mm graded stone aggregate) of size 300mm x 300mm x 300mm complete all as specified and directed. Make : SD-03 of M/s Sapphire Road Safety Products/3M/Dark eye/Avery denson/sinor infratsture/equivalent as approved as GE.
S&F in repair convex safety mirror 1000mm dia made of PC material provided with suitable stainless steel pipe post (50mm dia and 1.50m height above ground level and 0.60m below ground level). The pipe shall be embeded in PCC (1:2:4) type B1 using 20mm graded stone aggregate of block 45cmx45cmx60cm including necessary excavation as in post hole complete all as specified and directed.
S&F in repair cat eyes ABS body with scratch and abrassion resistant, micro prismatic, polycarbonate and ultrasonically welded lenses, temperature resistance body of size 90x110x17mm fixed on road with bituminous adhesive as per manufactures instruction having resistant creamer coating and reflective surface complete all as specified and directed. Make-3M/Dark Eye/ Avery denson
S&F in repair speed bumps high resistance to severe impacts and hard weather conditions made of sturdy plastic (black/yellow colour) & UV Stabilizers, studded with reflectors on either side complete all as specified and directed. Make:- Dark eye Model No. DA 1004/Sinor Infrastructure/3M/ equivalent make as approved by GE.
Demolition of cement concrete in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate, as in sub base of floor complete all as specified and directed.
M&L for sand/crused stone dust filling under interlocking paver block as in sand cussion bed including leveling complete all as specified and directed.
M&L for 80mm thick M-40 grade factory made rubber moulded factory made vibratory compected cement concrete interlocking paver block pre-polished in approved design and colour conforming to IS 15658-2006 with cement and pigment as approved laid over and including 30mm thick sand cushion and joints filled with sand complete all as specified and directed.
M&L for plain cement concrete 1:2:4 Type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs complete all as specified and directed.
M/S A P CONSTRUCTION
M/S PRAGATEE ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .