Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.6 LAccepted-AOC | L1 | Accepted-AOC DUE TO QUOTED RATE L1 |
Tender Value
₹9.3 L
EMD Value
₹18,600
Closing Date
9 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Lekhapani
GE Lekhapani Tinsukia, Assam
PROVN OF TOILET BLOCK NEAR BLDG NO.T-89 AND SECURITY FENCING AROUND STN OFFICERS MESS AT TEZU MIL STN UNDER GE LEKHAPANI
2022_MES_544054_4
8681/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE Lekhapani
Class E Category a (I)
4 documents required · 4 mandatory
₹500
GE Lekhapani
₹18,600
Yes
17 Jan 2023
18 Nov 2022
13 Dec 2022
18 Nov 2022
9 Dec 2022
25 Nov 2022
Amount
Surface Excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation,etc and getting out in soft/ loose soil complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm of soft loose soil complete all as specified and directed..
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
M&L for loose filling with broken brick aggregates of gauge 80 to 150mm in soakage pit, soak well etc complete all as specified and directed
M&L PCC (1:4:8), type D-2, (using 40mm graded stone aggregates) as in foundations, filling, mass concrete etc complete all as specified and directed.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight for curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
M&L Providing RCC (1:2:4) type B-1, (using 20mm graded stone aggregate) as in lintels etc, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets including necessary formwork complete all as specified and directed.
M&L Providing RCC (1:1.5:3) type A-1 (using 20mm graded stone aggregate) as in as cover slab for manholes, septic tank, soak well etc set in CM (1:4) with plain fair faces incl chamfered, weathering, throating etc incl necessary use and waste of form work complete all as specified and directed.
M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed.
All as per Item No.11 above,but 6 to 8 mm dia complete all as specified and directed.
All as per Item No.11 above, but 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders,complete all as specified and directed.
M&L Rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces includingand finished fair and even all as specified and directed.
M&L Prepration of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L Rendering 10.mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M&L Glazed coloured ceramic tiles in vertical surface 300x450x6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over and including 10 mm thick rendering as in backing coat wall plaster in CM (1:4) complete all as specified and directed.
M&L Coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile not exceeding 0.18 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and directed.
S&F Steel ventilators, fixed type complete with glazing bars dovtailed or welded,etc complete all as specified and directed.
S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed
S&F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165,complete all as specified and directed.
S&F Rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A, complete all as specified and directed.
M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS:15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L for pre-painted hot dip aluminium-zinc alloy metallic coated plain steel sheet, any pattern corresponding to IS:15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L 75 mm thick PCC ( 1:4:8 ), type D-2 (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and as directed.
M&L 50 mm thick PCC (1:3:6) type C-1, (using 20 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand 1:2 complete as specified and directed.
S&F GI pipe 15mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F GI pipe 20mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F Fancy type15mm dia swan neck pillar taps, cast copper alloy with capstan heads, chromium plated , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F, Wash basins white, vitreous China, flat back, size 580x450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed to wall complete all as specified and directed.
S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) incl Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F 40 mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqm as in waste water pipes complete fixed in repair all as specified and directed.
S&F in repairs 15mm bore dia stop valves / angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks of 1000 ltr capacity,(cylindrical vertical with closed top) double layered,hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.
S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified and directed.
M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair 32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) fixed complete all as specified and as directed.
M&L Preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paintover a coat of red oxide primer complete all as specified and directed.
S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
S&F PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
S&F PVC (SWR) bends 110 mm dia any radius complete all as specified and directed.
S&F PVC (SWR) bends 75 mm dia any radius complete all as specified and directed.
M&L 50 mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floors finished even and smooth without using extra cement.complete all as specified and as directed.
M&L Chequered cement concrete tiles of size 25cm x 25cm x 22mm thick, cast in rubber moulded glossy finish of approved colour general purpose double layer with mixture of white and grey cement in equal proportions and pigments set and jointed and pointed in neat cement slurry in floor incl layer over 15mm thick bedding of CM (1:6) complete all as specified and as directed
Excavating in post holes (or similar holes) in soft /loose soil, each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm ,watering and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and as directed.
M&L PCC (1:3:6), type C-1 (using 20mm graded stone aggregate) as in bed blocks, coping etc including necessary formwork complete all as specified and as directed.
M&L Rolled miled steel section such as angle etc as in post and struts as in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, Flat iron fillets (for securing wiremesh etc ) including all necessary drilling , bolting or riveting etcand similar works conforming to Fe 410-0 or Fe 310-0, ccomplete all as specified and directed
Supply only chain link mild steel galvanized fencing, any type or size complete all as specified and as directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed.
S&F Mild steel round bars 10mm dia and over cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete complete all as specified and as directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5 cm but not exceeding 10 cm long and dia of shank 11 to 15 mm complete all as specified and as directed.
Supply and laying of sand for sand cushioning with a layer of sand 8cm thick before laying of cable and 10 cm thick after laying of cable in trenches complete all as specified and as directed. Note: Punned thickness shall be measured for payment.
M&L Brick protection using old size sub class ‘B’ new bricks, laid flat dry but jointed, laid length wise perpendicular to the axis of cable all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 2 core,10.0 sq mm,laying in trenches/wall complete all as specified and directed.
S&F 40 mm bore GI tubing (light grade) with all fittings,etc as laying in trenches/wall for cable protection,complete all as specified and directed.
M&L Cutting existing steel tubing for alteration or addition (each cut measured ) bore of pipe 40 mm / 50 mm /80mm complete all as specified and directed.
M&L Screwing existing steel tubign for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed.
S&F GI pipe of size 25 mm bore,galvanised (medium grade) with all fittings and accessories complete laying in trenches/ on wall/under road complete all as specified and directed.
S&F GI pipe of size 40 mm bore,galvanised (medium grade) with all fittings and accessories complete laying in trenches/ on wall/under road complete all as specified and directed.
S&F Gate, globe valves of size 25 mm bore,cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F Gate, globe valves of size 40 mm bore,cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.
M & L Brick valve chamber of internal size 90 cm x 90 cm x 90 cm using brick masonry with 23 cm thick wall in CM (1:6) including excavation, earth work in any strata and 75 mm thick PCC (1:4:8) type D-2, foundation, plastering both internal and external with 10 mm thick CM ( 1:4) and providing coping with 50 mm thick PCC (1:2:4) Type B1 (using 20 mm graded stone aggregate) as in top surface of allround the wall and 3.15 mm MS sheet chamber cover double opening arrangement center lock system with 40x40x6mm angle iron frame duly painted with two coats of black bituminous paint over one coat of red oxide primer complete all as directed by Eng-in-charge.
M & L for concealed point wiring complete with 1.5 sq mm FRLSH,PVC insulated multi standard copper conductor single core cable 1100 volts grade,drawn into and including non metalic PVC rigid conduit medium grade of size not less than 20mm bore and conduit accessories fixed on wall roof etc, and including provn of PVC insulated 1.5 sq mm copper conductor cable for earth continuity and connected to common earth dolly and pressed steel terminal boxes made out of 1.6 mm thick MS sheet concealed in wall and laminated sheet cover of 3 mm thick on top for housing the switches socket,outlet etc.,for one light point controled by one one way 5 Amp switch complete all as specified and directed by Engineer-in-Charge. Note : caused of PVC conduit cutting chases of wall making good disturbed wall surfaces including finishing with CM (1:4) matching with existing shade of the painted surface are deemed to be included in the quoted rate.
All as per Item No. 67 above,but one Exhaust fan point controlled by one , one way 5 Amp switch
S&F Switch piano flush button, single pole, one way 5 Ampcomplete all as specified and directed.
S&F Ceiling rose, 3 terminals, surface bakelite / PVC / Polycarbonate, isolated body to be fixed on wall/ceiling complete all as specified and directed.
S&F Integrated LED tube light fitting complete set 2 ft, 1 x 10 watt connector block etc. complete with all accessories internally pre-wired and connecting the same to ceiling rose with using copper conductor 23/0.0076 flexible twisted twin core cable ,and fixing the light fitting to walls / roof complete all as specified and directed
S&F Single pole and neutral DB wall mounting type,240 Volts,4 Way with 200 Amps rated bus bar,double door suitable for fixing MCB's including connecting etc complete all as specified and directed.
S & F MCB SPN 6 Amps to 32 Amps, 10 KA, C curve, 240 volts complete all as specified and as directed.
S & F MCB SP 6 to 32 Amps,10 KA, C curve, 240 volts complete all as specified and as directed.
S & F LED building security light fitting 25W new generation energy saving and environmental friendly long life made up of pressure diecast aluminium housing switch high power LED as lighting source with IP65 protection and impact resistance of IK07 complete all as specified and as directed.
S & F Exhaust fan 300mm sweep,heavy duty metal body,1400 RPM and connecting the same to ceiling rose with using copper conductor 23/0.0076 flexible twisted twin core cable ,and fixing the light fitting to walls / roof complete all as specified and directed
M&L Earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe (light grade) for earth lead protection pipe for suitable length and GI pipe 20 mm dia (light grade) for watering pipe with funnel and wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 (using 20 mm graded stone aggregate) for earth pit and 40 mm thick pre-cast cover of RCC (1 : 2 : 4) type B1 (using 20 mm graded stone aggregate) with 3 Nos 8 mm dia TMT bars both ways, and testing on completion etc,complete all as specified and directed by Engineer-in-Charge.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .