Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.2 LAccepted-AOC HOUSE NO 8 T SHIVPUR MAHADEV JHARKHANDI TUKRA NO 1 P O KUNRAGHAT DISTT GORAKHPUR UTTAR PRADESH 273008 | GORAKHPUR | GORAKHPUR | UTTAR PRADESH | 273008 | L1 | Accepted-AOC Lowest Bid L1 rank is competitive and reasonable during Scrutiny amongst bidders | |
| 2 | L2₹63.2 L+₹18.7 L (42.0%)Rejected-AOC D 1 KHOTTA TOLA KUNGRAGHAT GORAKHPUR | GORAKHPUR | GORAKHPUR | UTTAR PRADESH | 273008 | L2 | Rejected-AOC Being Not Lowest | |
| 3 | Rejected-Technical 0 CIVIL LINES TETARI BAZAR TETARI BAZAR NAUGARH SIDDHARTHNAGAR UTTAR PRADESH 272207 | SIDDHARTH NAGAR | UTTAR PRADESH | 272207 | - | Rejected-Technical Bidder two class below the eligible class |
Tender Value
₹52 L
EMD Value
₹1.0 L
Closing Date
29 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE(AF) Bamrauli
HQ CWE(AF) Bamrauli, Prayagraj, PIN - 211012
Repair to building Roof sheets and Volleyball Court
2023_MES_583375_1
87259/E8
Open Tender
Civil Works
Item Rate
182 days
Varanasi
As per NIT
8 documents required · 8 mandatory
₹1,000
GE(AF) GORAKHPUR
₹1.0 L
Yes
13 May 2023
28 Feb 2023
5 Apr 2023
28 Feb 2023
29 Mar 2023
15 Mar 2023
28 Feb 2023 - 7 Mar 2023
Amount
Surface dressing n exc. 15 cm deep in soft/loose soil. Complete all as specified and dircted.
Excavating in trenches, not exceeding 1.5 mtr wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm, all as specified and directed.
Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point, All as specified and directed.
M & L for broken stone hard core of gauge n exc 63 mm , deposited , spread and levelled in layers n exc 15 cm thick , watered and rammed to a true surface, all as specified and directed.
Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3 Earthwork) to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination
M&L for PCC (1:4:8) type D-2 using( 40mm graded stone aggregate ) as in foundations, filling and mass-concrete compete all as specified and directed.
M&L for Cement concrete Type B1 (1:2:4) , using 20 mm graded aggregate in foundations, filling and mass concrete.Complete all as specified and directed.
M&L for Cement concrete Type B2 (1:2:4) , using 40 mm graded aggregate in foundations, filling and mass concrete.Complete all as specified and directed.
M&L for RCC (1:1½:3) type A1 using 20 mm graded stone aggregate in Slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves etc complete all as specified and directed.
M&L for Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls, built CM in 1:6 complete all as specified and directed.
Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls, built CM in 1:6 using old bricks obtained from demolition item, complete all as specified and directed.
Formwork to soffits of suspended slabs such as shelves not exceeding 200mm thick rough finished surfaces of concrete flat surfaces complete
S&F anodised aluminium powder coating frame for doors, windows ventilator with one or more rebates including cleat for fixing etc, thickness of powder coating 50 micron complete all as specified and directed.
S&F Anodised aluminium powder coating window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc thickness of powder coating 50 micron, complete all as specified and directed
Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
M&L for powder coated aluminium (sliding/hanging type) windows/ventilator with frame size 100x40x2.0mm thick and shutter with section bearing bottom 25x18x1.50, top 39.4 x 17.7x1.50mm (suitable for moving over three track fixed over top of frame work, top and side section of size 61.6 x 31.75 x1.50mm and bearing bottom track of size 61.6 x 31.75 x 1.5 mm or fixing with hinges steel wire cloth 0.36mm nominal dia of wire and average width of apreture 1.4mm including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised shape beading, screws etc with incl powder coated aluminium grill with all fittings & fixture .complete all as specified and directed.
M&L for 2nd class hard wood timber scantling wrought for making bar counter.Complete all as specified and direcected.
M&L Plain fillet exc 13 sqcm but n.exc 25 sqcm. square, rectangular or triangular in section, clean sawn, secured with nails or brads, second class hard wood, all as specified and directed.
M&L Plain fillet exc 13 sqcm but n.exc 25 sqcm. square, rectangular or triangular in section, clean sawn, secured with nails or brads.bull nosed, splayed, chamfered or rounded on one edge, second class hard wood, all as specified and directed.
S&F 2nd class hard wood - 20 mm thick Boarding fixed with nails in any situation (except flooring and skirting) plained with one side and butt joined as in bar counter, complete all as specfied and directed.
M&L Second class hard wood plain, solid, chowkhats and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified as directed.
S&F 1st class hardwood 35 mm thick Glazed and skeleton shutters,divided into squares, with plain,chamfered or rounded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.
M&L Flush shutters, 40 mm thick solid core construction with block board core and plywood face panels commercial type on both sides one face is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed.
M&L for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both face is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed
S&F 30mm thick Plain, framed panelled shutters(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed
M&L for Pressed steel frames for doors of size 100x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed, complete as specified and directed.
S&F Brass, sliding door bolt of 300mm with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed.Complete all as specified and directed.
S&F 300mm, Brass skeleton tower bolts with cast brass plate and staples and rolled or drawn brass bolt and fixed. Complete all as specified and directed.
S&F 100mm,Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 Complete all as specified and directed.
S&F 100mm,Butt hinges, heavy weight, cold rolled mild steel, and fixed, complete all as specified and directed.
S&F 150mm Extruded brass handles, fabricated type polished, Complete all as specified and directed.
S&F 150 mm long aluminum anodized barrel tower bolt of extrude section, fixed with screw complete all as specified and directed.
S&F 25mm dia harroson rails, mild steel, chromium palted with fixing brackets, stops, rollers etc, complete all as specified and directed.
S&F 150mm Aluminium handles, cast type, anodised, complete all as specified and directed.
S&F Mild steel sliding door bolts of size 300 mm,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.
S&F Aluminium anodised, barrel tower bolts150mm long of extruded section, complete all as specified and directed.
S&F 100mm,Butt hinges, heavy weight, cold rolled mild steel, and fixed, complete all as specified and directed.
S&F 150mm Aluminium handles, cast type, anodised, complete all as specified and directed.
M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Fixing only Volley ball court poles including embeding in concrete and screwing etc
M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.
S&F steel work in tubular Post/ trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St-240 including all necessary work as directed by Engr in Charge. Complete all as specified and directed.
S&F steel doors inculding projecting type hinges, steel handle, complete, with, glazing bars, dovetailed or welded complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated, steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F Anodised aluminium snap grid frame work of size 605x605mm for false ceiling including Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long.Complete all as specified and directed.
S&F 12 mm thick particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed on snap grid, Complete all as specified and directed.
M&L 75 mm thick cement concrete type -C2 (1:3:6) using 12.5 mm stone aggregate as in sub base/plinth protection all as specified and directed.
M&L for Cement concrete 40 mm thick,type B- 0, (1:2:4 ) using 12.50 mm graded aggregate) and finishing cement concrete surface even and smooth without using extra cement.Complete all as specified and directed.
S&F machine cut kota stone slab flooring 20-22mm thick over cement screed base laid and jointed with grey cment slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, all as specified and directed. (Note - Screed bed shall be measured separately)
S&F machine cut kota stone 10-12mm thick in vertical surfaces such as skirting, raiser to steps etc, over cement screed base laid and jointed with grey cment slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, all as specified and directed. (Note - Screed bed shall be measured separately)
M&L for Granite 18 to 20mm thick machine cut in flooring , shade as approved by GE, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing rounded edgs laid over & including15 mm thick screed bed in cm 1:6 , complete all as specified as directed.
M&L for Granite 18 to 20mm thick machine cut in vertical surfaces, shade as approved by GE, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing rounded edgs laid over & including10 mm thick screed bed in cm 1:3 , complete all as specified as directed.
Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and directed.
S&F Vitrified Ceramic tiles Dark shade, Double charged/ultracharged 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 20 mm thick screed bed in cm 1:6 etc complete all as specified and directed.
M&L Glazed ceramic tiles in vertical surface of size 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade, including r backing coat of 10 mm thick cement mortar (1:3), all as specified and directed..
S&F Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6.Complete all as specified and directed.
M&L for laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and weeping extra sand, complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0kg of cement per sq. metre. Complete all as specified and directed.
M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A 'Complete all as specified and directed.
M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' .Complete all as specified and dircted.
M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed.
M&L rendering 15mm thick on other than fair finish of bricks / concrete surface of wall in CM (1:4) using WPC and finished the surface even and smooth without extra cement ( WPC to be measured and paid seperately ) complete all as specified and directed .
M&L 5 mm thick rendering on concrete surfaces such as sides of roof beams, soffits of roof slab (ceiling )etc in CM 1:3, finished fair & smooth without using extra cement all as specified and directed .
M&L for preperation of newly plastered wall surfaces of ceiling and apply two coats of oil bound distember over 2 mm thick wall putty, all as specified and directed.
M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
Supply only liquid water proofing compound.
M&L for preparation of concrete surfaces of any description not exceeding 10 Cm width or girth and applying two coat of heat resisting paint Complete all as specified and as directed.
M&L for preparation of surfaces of any description of new steel over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.
M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats over primer over 3mm thick wall care putty over complete removal of existing paint/putty. all as specified and directed
M&L for two coats of oil bound distemper on Ceiling surface over a coat of primer over 2 mm thick wall care putty, complete all as specified and directed.
M&L for two coats of synthetic enamel (ordinary tint) on wooden surfaces of any description, not otherwise describe,over 10 cm width or girth over a coat of pink primer on new or privioulsly untreated surfaces, complete all as specified and directed.
M&L for Preparing new wooden surface and applying two coats of synthetic Varnishing over a coat of wood filler liquid transparent with oil staining of any description exc 10 cm width or girth.Complete all as specified and directed.
S&F 4 mm thick sheet glass in metal frame, ordinary quality n.exc 0.5sqm in each pane. Complete all as specified and directed.
S&F Galvanised iron water tubing 15 mm bore medium grade galvanised including short lengths fixed to wall / concealed in wall /ceiling or laid in floor complete with all fittings, such as bend, elbow,tees, short pieces,connectors,back nuts diminishing pieces, cap and plugs,unions etc, all as specified and directed.
S&F Galvanised iron water tubing 20 mm bore medium grade galvanised including short lengths fixed to wall / concealed in wall /ceiling or laid in floor complete with all fittings, such as bend, elbow,tees, short pieces,connectors,back nuts diminishing pieces, cap and plugs,unions etc, all as specified and directed.
S&F 50mm Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches. Complete all as specified and directed.
S&F PVC (SWR) bends any radius for 110 mm bore provided with access door, all as specified and directed.
S&F in 10 Ltrs capacity PVC flushing cistern valveless, syphonic action type, low level,white, with inlet, ball wall, float and handle including brackets and connecting to pipes and fixing of chain and pull or lever if any complete all as specified and directed.
S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern
S&F 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.
S&F Stop valves, 15mm ,cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
S&F vitreous chaina squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete fixed in repair complete all as specified as directed.
Taking down old sink with draining board and fixing new stainless steel kitchen sink with draining board made of stainless steel 1mm thick,coupling plug , washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm X 460 mm and bowl size 410X330X160 mm complete all as directed .
S&F 15mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
S&F PVC connections 15 mm size with PTMT nuts of length 600 mm long, all as specified and directed.
S&F in repaire brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, all as specified and directed.
S&F 18 mm thick HDHMR (High density high moisture resistance) board of grade1 quality make:Green Ply, Action Tesa or other make as approved by GE of one side prelem and other side to suitable for high gloss finsih mica of appoved colour and quality, make:- Century or as approved by GE Fixed with screws, slovent cement/adhesive to make Bar counter, cupboard shutters, sides, top, bottom, shelves inside the cabinet shutter or drawer. Complete all as specified and directed.
S&F CPSS telescopic channel 20" long zinc (45Kg) made-sleek (asian paint ) code- HICH 1277) or equivalents. Complete all as specfied and directed.
S&F CPSS telescopic channel 12" long zinc (45Kg) made-sleek (asian paint ) code- HICH 1446) or equivalents. Complete all as specfied and directed.
S&F 75 mm size L/Z type stainless hinges fixed screws openable at 110 degree for cabinet shutter Make- KAFF complete all as specified.
S&F stainless steel handles of 170 mm size for kitchen cabinet shutter complete all as specified.
S&F Soft closing 110mm Full overlay slide on hinges Make Sleek/Asian paint code-HIHG4079 83024900 1W 4H 3D or equivlent.
S&F SS Designer Cup and Saucer Basket of size 380x405x100mm make of Sleek (code-ASSDCS380405100) or equivlent. Complete all as specified and directed.
S&F SS Perforated Curtlery Basket of size 380x500x100mm make of Sleek (code-ASSTPCB 380500100) or equivlent. Complete all as specified and directed.
Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quains, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed .
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
Taking down chowkhats and frame exceeding 1.5 Sqm but not exeedingc 4 Sqm each with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each including cutting holes for removal of hold fast and removing from site complete all as specified.
Taking down chawkhats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each including cutting holes for removal of hold fast and removing from site complete all as specified and directed.
Taking down cement plaster on brick walls etc, including racking out joints, hacking for keys, scrubbing down with water etc & prepare surface to receive new plaster and rubbish of the premises all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.complete all as specified.
Dismantling stone slab & tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed. Complete all specified and directed
Taking up or down steel tubing 15mm bore including cleaning for refixing or removal from site complete all as specified and directed.
Taking up or down steel tubing 20 mm bore including cleaning for refixing or removal from site complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (Light,fan,socket are power) complete fitting such as switches, ceiling rose, regulator, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors, etc. all as specified and directed.
Taking down old unsrviceable lights any wattage/any type.
Taking down carefully copper/aluminium power/sub main wiring of any size / type all as specified and directed.
Taking down the existing defective LT UG cable from trenches / pipes / pole for fault finding / replacement, all as specified and directed of any size between 10 Sq mm to 50 Sq mm 3.5 core/4 Core. ( Note-Excavation and earth work will be measured and paid seperately under relevant item. )
M&L light fan point controlled by one switch with PVC insulated, unsheathed , multi stranded, single core copper conductor FRLS ( Flame Retardant Low Smoke) cable 1.50 Sqmm suitable for fixing in concealed PVC conduit of size not less than 20 mm dia with metal flush boxes including white cover plate with frame of required module.Metal flush box should not less than 2 mm thick duly painted inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer of required module suitable for housing modular switches, socket, fan regulator etc. PVC insulated, unsheathed, multi stranded, single core copper conductor FRLS cable 1.50 Sqmm used as earth wire to commen earth and connected to common dolly drawn in same conduit all as specified.
All as per item No 109 above but one 3/5 pin socket out let 5 amp on same board with other switches.
All as per item No 109 above but socket 5 amp on independent board.
All as per item No 109 above but socket out let 3/6 pin 15 Amp with 2.5 sq mm size copper conductor for power point on indipendent board.
All as per item No 109 above but One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size
M & L for power/sub main wiring with two runs of single core 6 sqmm size and one run of single core 4.0 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables drawn through and including rigid PVC conduit complete all as specified and directed.( Note - two runs of 6 sq mm single core copper conductor and one runs of 4.0 Sq mm copper conductor shall be measured as one unit length.)
Supply & Fixing switch piano flush type single pole one way 5 Amp.
Supply & Fixing bell push flush type switch.
Supply & Fixing socket 3/5 pin 5 Amp flush type.
Supply & Fixing switch socket combination 3/6 pin 5/15 Amp universal type.
Supply & Fixing electronic stepped type fan regulator.
Supply & Fixing call bell ding dong type 230 Volts AC supply.
Supply & Fixing switch modular single pole, one way 6 Amp ,01 module.
Supply & Fixing switch modular single pole, one way 16 Amp ,01 module.
Supply & Fixing modular socket 6 Amp-2/3 pin combined ,2 module.
Supply & Fixing modular socket 6/16 Amp-2/3 pin combined ,2 module.
S&F Modular electronic type step fan regulator, 120 W-2 module.
Supply & Fixing ceiling rose surface backlite 65X20 mm two to three terminals complete.
Supply & Fixing lamp holder PVC / Ploycarbonate modular type.
Supply and fixing in replacement engineering plastic batten with white acrylic cover LED light ( integrated LED channel) natural white/warm white as required at site ,energy saving complete with its all acessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size of 24 W, complete all as specified and directed .
Supply and fixing in replacement engineering plastic batten with white acrylic cover LED light ( integrated LED channel) natural white/warm white as required at site ,energy saving complete with its all acessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size of 10 W, complete all as specified and directed .
Supply & Fixing recess mounting sleek round / Square LED downlight luminaire white 15 Watt , 230 Volts, complete for POP ceiling , with driver, connector block ,etc, complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size, complete all as specified and directed .
Supply and fixing integral LED spot light, 09 W, 230 Volts, complete for POP ceiling having beam angle 36* and vertical tilt 30*, with driver, connector block ,etc, complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size, complete all as specified and directed.
Supply and fixing LED strip in length 5 mtr WW , 24 W, 230 Volts, complete for POP ceiling , with driver, connector block ,etc, complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size, complete all as specified and directed.
Supply & Fixing in replacement LED lamp 9/7 Watt .
Supply & Fixing LED lamp 12 Watt .
Supply & Fixing recess mounting sleek round / Square LED downlight luminaire white 15 Watt , 230 Volts, complete for POP ceiling , with driver, connector block ,etc, complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size, complete all as specified and directed.
Supply and fixing in replacement integral LED bulkhead luminaire, 10 W, 230 Volts, IP 65 protection decorative surface mounted , complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size, complete all as specified and directed.
Supply & fix exhaust fans heavy duty complete steel body and copper winding fan motor,1400 rpm ,AC single phase 230/ 240 V, 50 Hz AC, of size 300 mm sweep with louver including breaking necessary hole in wall for fixing the exhaust fan and making good to disturbed surfaces with cement mortar to match with existing after commissioning, complete all as specified and directed.
Supply & fix fans ceiling having copper winding motor ,complete with electronic type regulator and accessories 230 V,50 Hz AC ,1200 mm sweep. BEE 5 star rated, all as specified and directed.
Supply & Fixing wall mounting fan complete steel body and copper winding fan motor 400 mm sweep, 230 V AC,including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.
Supply and laying ,jointing and testing XLPE insulated extruded PVC outer sheath and inner sheath galvanized steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade conforming to IS 7089 (Pt I of 1988) laid in tranches/ pipe/duct/pole complete all as specified and directed size 16 sq mm 4.0 core, all as specified and directed.
Supply & laying sand cushioning for cable protection in trenches 8 cm before laying cable and 15 cm thick over the cable complete all as specified and ditected.
Supply & laying brick for protection of cable sub class 'B' laid dry flat across the cable with width equal to the length of whole bricks complete all as specified and ditected.
Supply & fixing earth plug enclosure (plug and socket ) with MCB, SP 20 Amps.
Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail SPN 12 way.
Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail SPN 8 way.
Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail TPN 4 way.
Supply & Fixing MCB TPN 16 to 32 Amps 415 volts, 10KA "C" curve.
Supply & Fixing MCB SPN 32 Amps 240 volts, 10 KA, "C" curve.
Supply & Fixing MCB SP 5 to 32 Amps 240 volts, 10 KA, "C" curve.
M & L GI pipe 40 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.
Labour for boring, holes for inserting of 40 mm bore GI pope under the road/hard standing or any other location not less than 1200 mm deep complete all as specified and ditected.
M&L earthing complete with galvanised steel earth plate 600X600X6 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.5 m below GL) connected with GI earth wire 4Sq mm as earthing leads by means of bolts, nuts, check nuts and washers properly jointed as shown on drawings and including excavation, earth work. GI pipe light grade 15 mm bore for protection of GI earth wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed.
M/s Comfort Air Conditioning and Refrigeration Engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .