Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹3.0 LAccepted-AOC NEAR GAYATRI MANDIR ADARSH NAGAR KUSMUNDA KORBA CG 495454 | KORBA | CHHATTISGARH | 495454 | ₹3.0 L | L-1 | Accepted-AOC The work is awarded to L-1 Bidder. |
| 2 | Rejected-Technical H NO 315 PANI TANKI WARD NO 51 BANKI MONGRA KORBA CG 495447 | KORBA | CHHATTISGARH | 495447 | - | - | Rejected-Technical DUE TO L- 3 BIDDER |
| 3 | Rejected-Technical | - | - | Rejected-Technical DUE TO L- 4 BIDDER |
| 4 | Rejected-Technical | - | - | Rejected-Technical DUE TO L- 2 BIDDER |
Tender Value
₹4.8 L
EMD Value
₹6,000
Closing Date
6 Aug 2022, 5:00 pmClosed
GM CIVIL GEVRA AREA
Office of the General Manager , SECL, Gevra Area, PO Gevra Project, Distt.- Korba (CG)Contact No. 9425534061
Installation of 1 Nos tubewell / borewell with submersible pump and sintex water tanks at Barbhatha Village Katghora, Korba under CSR head of SECL, Gevra Area
2022_SECL_251158_1
SECL /GA/ GM(C) / ETN/ 22-23 /78 dtd. 23.07.22
Open Tender
Civil Works - Others
Item Rate
30 days
Gevra Area
Please refer Tender documents.
3 documents required · 3 mandatory
₹6,000
6 Oct 2022
26 Jul 2022
8 Aug 2022
26 Jul 2022
6 Aug 2022
27 Jul 2022
26 Jul 2022 - 30 Jul 2022
Amount
Item Description/ Heading
Drilling of perfectly vertical bore hole of a diameter suitable to receive 150 mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 150 mm nominal diameter and fixing of 150 mm nominal diameter M.S./ G.I. / U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc.complete. In all type of collapsible strata consisting of soils, clays, sand , moorum, gravel, boulders etc.
Drilling of perfectly vertical bore hole of a diameter suitable to receive 150 mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 150 mm nominal diameter and fixing of 150 mm nominal diameter M.S./ G.I. / U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc.complete. In all types of rocks.
ISI marked UPVC casing pipe Confirming to IS 12818/92 (with up-to-date amendments), Part- C,General Note: 27.28.11 CS casing pipes, 150 mm dia
Supplying & Installation of Energy efficiant five star BEE rating ISI Marked required capacity single phase, 50 Hz, 220V, deep well submersible pump Stainless Steel body, suitable for 4"/6" tube well with Contral Panel Starter suitable for ubmersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications utexcludingpipe,SS/Nylonwireropeandconnection cable. 2 H.P. with 25 stages, Head Mt. 163-58 Discharge LPM 10-45
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm dia nominal bore
Supplying and laying of submersible flat cable ISImarked 3 core copper wire of suitable size with proper clamping of approved make. 4.0 Sq.mm.multi strand
Supplying and laying of approved make stainless steel wire rope 6 mm thick complete with binding for support of pump and motor
Providing & Fixing of MCB -Three Pole - 32 Amp as per instruction of Engineer-in-charge.
Providing and fixing ofsuitable rating ISImarkedwired with lugs & sleeves in place of burnt wiring of control panel. 1 HP - 3 HP (Single Phase)
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)
Brick work in Cement mortor 1:6 (1 cement 6 coarse sand with fly ash bricks of size 230 x 110 x 70 mm and having crushing strength of 75 Kgs / Sqcn to 100 Kgs / Sqcm as per the specification in : Foundation & plinth.
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore
Providing and fixing brass bib cock of approved quality : 15 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore
Total impact of GST for the purpose of CTC
Shree Balaji Traders
M/S GAURAV CONSTRUCTION
SATHISH CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_259529.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .