Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.5 LAccepted-AOC WARD NO 4 NEAR MASZID BHATTAGAON DISTT JHANSI 284001 UTTAR PRADESH | JHANSI | UTTAR PRADESH | 284001 | L1 | Accepted-AOC Being a L1 bidder | |
| 2 | L2₹45.9 L+₹4.4 L (10.7%)Rejected-Finance | L2 | Rejected-Finance Other than
lowest
bidder | |
| 3 | L3₹46.5 L+₹5.1 L (12.2%)Rejected-Finance HOUSE NO 164 SHASTRI NAGAR NEAR JAL NIGAM BABINA CANTT DISTT JHANSI UP | BABINA CANTT | JHANSI | UTTAR PRADESH | L3 | Rejected-Finance Other than
lowest
bidder |
Tender Value
₹44.3 L
EMD Value
₹89,000
Closing Date
29 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BABINA
GE BABINA CANTT 284401
MISC MINOR AND SPECIAL REPAIR WORKS AT AGE E/M AND AGE B/R-I UNDER GE BABINA
2022_MES_546522_2
GE/BAB/TOKEN/21 OF 2022-2023
Open Tender
Civil Works
Item Rate
180 days
GE BABINA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE BABINA
₹89,000
Yes
8 Dec 2022
1 Oct 2022
1 Nov 2022
1 Oct 2022
29 Oct 2022
15 Oct 2022
Amount
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtrs in depth for laying of pipe including getting out in soft/loose soil complete all as specified and directed. (cable shall be laid 60 cm below ground level ) complete all as specified and as directed.
Returning, filling in including spreading, leveling , watering and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and as directed.
Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.
Supplying, jointing and testing 25mm dia bore galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and directed
Supplying, jointing and testing 20mm dia bore galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and directed
Supply & fixing in position of Gun metal Gate or globe valve with iron wheel head, screwed both ends for iron pipes of size 20 mm bore complete all as specified & directed.
S & F in replacement ductile iron pipe with socket and spigot ends of 200 mm bore class - K-9 , with ceramic epoxy lining /coating inside and external zinc coating with a bitumen finishing layer conforming to IS - 8329-2000 (Reaffiremed - 2005 Edition 4.1) suitable for "push on joints" in any lengths and including providing joints (Tyton joints) etc complete all as specified.
S & F in replacement ductile iron pipe with socket and spigot ends of 150 mm bore class - K-9 , with ceramic epoxy lining /coating inside and external zinc coating with a bitumen finishing layer conforming to IS - 8329-2000 (Reaffiremed - 2005 Edition 4.1) suitable for "push on joints" in any lengths and including providing joints (Tyton joints) etc complete all as specified.
S & F in replacement ductile iron pipe with socket and spigot ends of 100 mm bore class - K-9 , with ceramic epoxy lining /coating inside and external zinc coating with a bitumen finishing layer conforming to IS - 8329-2000 (Reaffiremed - 2005 Edition 4.1) suitable for "push on joints" in any lengths and including providing joints (Tyton joints) etc complete all as specified. Note for item No 7 to 9 : (i) The cost of joints shall deemed to be included in unit rate quoted by the tenderer.(ii) Excavation and earth work shall be measured and paid seperately .
S & F galvanised steel water tubing medium grade 100 mm bore ( ISI Marked ) with all fittings such as bends, elbow, socket etc laid under floors/trenches or on walls with fixing arrangments complete all as specified and directed.
S & F galvanised steel water tubing medium grade 80 mm bore ( ISI Marked ) with all fittings such as bends, elbow, socket etc laid under floors/trenches or on walls with fixing arrangments complete all as specified and directed.
S & F galvanised steel water tubing medium grade 50 mm bore ( ISI Marked ) with all fittings such as bends, elbow, socket etc laid under floors/trenches or on walls with fixing arrangments complete all as specified and directed.
S & F galvanised steel water tubing medium grade 40 mm bore ( ISI Marked ) with all fittings such as bends, elbow, socket etc laid under floors/trenches or on walls with fixing arrangments complete all as specified and directed.
S & F galvanised steel water tubing medium grade 25 mm bore ( ISI Marked ) with all fittings such as bends, elbow, socket etc laid under floors/trenches or on walls with fixing arrangments complete all as specified and directed.
S & F galvanised steel water tubing medium grade 20 mm bore ( ISI Marked ) with all fittings such as bends, elbow, socket etc laid under floors/trenches or on walls with fixing arrangments complete all as specified and directed.
S & F galvanised steel water tubing medium grade 15 mm bore ( ISI Marked ) with all fittings such as bends, elbow, socket etc laid under floors/trenches or on walls with fixing arrangments complete all as specified and directed.
S & F in replacement of cast iron sluice valve of 200 mm bore class PN-1.6 ISI marked (as per IS 14846 of 2000) heavy duty with flanged ends with high tensile SS spindle and gun metal check nut, iron hand wheel and fixing with providing suitable nuts, bolts, washers and rubber gasket for packing etc complete all as specified and directed.
S & F in replacement of cast iron sluice valve of 150 mm bore class PN-1.6 ISI marked (as per IS 14846 of 2000) heavy duty with flanged ends with high tensile SS spindle and gun metal check nut, iron hand wheel and fixing with providing suitable nuts, bolts, washers and rubber gasket for packing etc complete all as specified and directed.
S & F in replacement of cast iron sluice valve of 100 mm bore class PN-1.6 ISI marked (as per IS 14846 of 2000) heavy duty with flanged ends with high tensile SS spindle and gun metal check nut, iron hand wheel and fixing with providing suitable nuts, bolts, washers and rubber gasket for packing etc complete all as specified and directed.
S & F in replacement of cast iron sluice valve of 80 mm bore class PN-1.6 ISI marked (as per IS 14846 of 2000) heavy duty with flanged ends with high tensile SS spindle and gun metal check nut, iron hand wheel and fixing with providing suitable nuts, bolts, washers and rubber gasket for packing etc complete all as specified and directed. Note for item No 17 to 20:- Any damage if occurs while replacing the sluice valve to pipe lines, over head reservoir will be responsibilty of contractor and will be repaired by contractor at his own cost. Nothing extra will be admissible on this account.
M&L for Construction of Valve pit of size 1050 x 1050 x 950 mm (internal dimensions) with Brick masonry construction including all necessary excavation and earth work in hard/ dense soil,returning fillingin, disposal of surplus soil to a distance not exceeding 50 m and depositing where directed , PCC in foundation of the mix (1:4:8) Type D-2 (using 40 mm graded crushed stone aggregate), coping in PCC(1:2:4), type B0 using 12.5m crushed graded aggregate, brick masonry work in cement mortar (1:4), rendering15 mm thick in cement mortar (1:4) internally and finished even and fair and pointing in CM 1:3 flush pointing externally . Mild steel angle iron 50x50x6mm frame work ,MS sheet cover with 3.15mm thick with handle made of flat iron 30x5 mm thick and locking arrangment including providing pad lock ( Godrej /Link/ Horisson ) 50 mm size Brass, and applying two coats of synthetic enamel paint of tint as approved over a coat of red oxide primer to all mild steel surfaces and providing two coats of black bituminous paint to all embedded portion of mild steel work etc. complete all as specified and directed.
Description all as per item No 21 above but valve pit of size 950x950x950mm.
S & F in replacement of gun metal gate valves of size 50 mm bore ISI marked with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S & F in replacement of gun metal gate valves of size 40 mm bore ISI marked with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S & F in replacement of gun metal gate valves of size 25 mm bore ISI marked with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S & F in replacement of gun metal gate valves of size 20 mm bore ISI marked with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S & F in replacement of gun metal gate valves of size 15 mm bore ISI marked with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S & F in replacement of 50 mm bore air release valve double chamber as per IS 14845 including mounting GI pipe and clamps as per requirement at site suitable for cast iron pipe/ ductile iron pipe incl all fittings washer, nuts & bolt etc complete all as specified and directed.
Disconnecting and taking down old existing cast iron pipe / ductile iron pipe with spigot and socketed end and lead jounts , 150 mm bore incl all fittings and connections such as bends, union,elbow socket etc and opening of joints of any type and retreiving lead from joints in any position in trenches/under floors / etc cleaning the pipe thoroughly for re-routing etc complete all as specified and directed.
Disconnecting and taking down old existing cast iron pipe / ductile iron pipe with spigot and socketed end and lead jounts , 100 mm bore incl all fittings and connections such as bends, union,elbow socket etc and opening of joints of any type and retreiving lead from joints in any position in trenches/under floors / etc cleaning the pipe thoroughly for re-routing etc complete all as specified and directed.
Taking up or down existing galvanised/steel iron pipe and connections including cleaning for refixing or removal to store of size 100 mm dia complete all as specified and as directed.
Taking up or down existing galvanised/steel iron pipe and connections including cleaning for refixing or removal to store of size 80 mm dia complete all as specified and as directed.
Taking up or down existing galvanised/steel iron pipe and connections including cleaning for refixing or removal to store of size 50 mm dia complete all as specified and as directed.
Taking up or down existing galvanised/steel iron pipe and connections including cleaning for refixing or removal to store of size 40 mm dia complete all as specified and as directed.
Taking up or down existing galvanised/steel iron pipe and connections including cleaning for refixing or removal to store of size 25 mm dia complete all as specified and as directed.
Taking up or down existing galvanised/steel iron pipe and connections including cleaning for refixing or removal to store of size 20 mm dia complete all as specified and as directed.
Taking up or down existing galvanised/steel iron pipe and connections including cleaning for refixing or removal to store of size 15 mm dia complete all as specified and as directed.
M & L for road cutting to depth up to 1.5 mtr below the normal ground level to lay pipe line upto 300 mm dia across the road in horizontal position and making good, the disturbed portion of road to match with the existing surfaces including returning filling with approved excavated earth complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in supporting of pipes/ foundations/foot path etc complete all as specified and directed by Engr-in-Charge.
Supplying ,fixing ,jointing and testing DI fittings as per BSEN:545 IS-9523 such as bend ( of any radius and angle) Tee ,reducer ,collar caps ,plugs ,glands ,tapers and junctions etc of any description with socket/spigot/flanged at ends as per site requirement suitable for 80 to 300 mm bore complete all as specified and directed .
Demolition of PCC/lime concrete (Other than Ground floors) terracing including felt in any description and in any position over roof etc complete all as specified and as directed by the Engineer-in-Charge
M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.
Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.
M&L, roughening surfaces of old concrete roof by picking ,sweeping clean and washing down with water to remove dust etc and applying a coat of cement slurry @ 3 Kg per Sqm complete all as specified and directed.
M&L, for cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in coping of parapet or roof kerbs or roof chamfered or on edge incl troweling slightly complete all as specified and directed.
M&L for 10 mm thick rendering in cement mortar 1:4 on fair faces of concrete surfaces when concrete is stil green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately as supply only in item No 47
Supply only integral water proofing compound complete all as specified and as directed
M&L, applying water proofing treatment with the following (a) First coat of bitumen primer conforming to IS -3384 @ 0.40 Kg/Sqm to be applied on prepared surface till the surface is properly impregnated (b) After the application of approved bituminous primer the water proofing memberne minimum weight 3 Kg/Sqm and minium 3mm thick reinforced with polyster non woven fabric (wt. not less than 160 gms/Sqm)laid on primed surface by tourch as per manufacured instruction. (c) All joints and change in direction should be curved with cement mortar (1:3) mixed with SBR latex @ 200 ml per bag on cement and cured well before laying membrane .
Fixing only old steel tubing of 20mm bore obtained from item No 36 herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings complete all as specified & directed.
Fixing only old steel tubing of 15mm bore obtained from item No 37 herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings complete all as specified & directed.
Cutting, chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 ends or edges of landings,steps cill, sunshades, shelves, lintels etc, and cutting chases for concrete water tubing or concealed conduit wiring etc and making good , cuting exceeding 10cm but not exceeding 20 cm girth in brick walls complete all as specified & directed.
S & F 500 ltr rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 including 20 mm dia GI pipe light grade washout pipe 450 mm long with plug and 20 mm dia GI pipe light grade over flow pipe 600 mm long with fitting and dismantling of existing unserviceable tank and removing from site, complete all as specified and directed.
Dismantling existing water tank of 500 ltr capacity rotational moulded polythene tanks (cylindrical vertical with closed top) and hoisted and fixed in position complete all as specified and as directed.
S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed
S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
Dismantling, floor,hearth,or wall tiling incluiding cement mortar bedding (incluiding backinng coat) etc complete including removing serviceable tiles to store and rubbish off the premises.complete all as specified and as directed.
M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with floor etc including 15 mm screed bed with CM(1:4) complete all as specified and as directed.
M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with floor etc including 15 mm screed bed with CM(1:4) complete all as specified and as directed.
M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in Skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with floor etc and icluding rendering 10 mm thick on fair faces of wall or conc surfaces in CM 1:4 finished rough for wall tiling etc complete all as specified and as directed.
M&L for joint free glazed coloured tiles 350x250x7mm/450x350x7 mm thick for work on vertical surface set & jointed in cement slurry and pointed in white or coloured cement to match etc icluding 10 mm thick rendering on fair faces of wall or conc surfaces in CM 1:4 finished rough for wall tiling etc complete all as specified and as directed.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM(1:6) etc complete complete all as specified and as directed,.
Demolition of PCC of any description and in any position etc complete all as specified at site
M&L for 75 mm thick PCC 1:3:6 type C-1(using 20mm graded aggregate stone aggregate ) as in plinth protection and finish surface even and smooth without using extra cement complete all as specified and as directed.
M&L for 50 mm thick PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in floor/hardstanding and finish even and smooth without using extra cement complete all as specified and as directed.
M&L, Chequered cement concrete tiles 20cmx20cmx25 mm thick, set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over & including 15 mm thick screed bed in CM (1:6) complete all as specified and directed .
Demolition of brick work or stone mansonry, built in cement mortar incl all quoins, pillars etc complete all as specified and directed
M&L for brick work with FLY ASH BRICKS , old size , straight or curved on plan exc 6 M radius built in cement mortar (1 : 6) etc complete all as specified and as directed.
M&L for brick work with sub class 'B'bricks , old size ,half brick thick straight or curved on plan exc 6 M radius built in cement mortar (1 : 4) etc complete all as specified and as directed.
Description same as per item No 68 above but except bricks. Note: Bricks obtained from demolition against item No 66 shall be used after cleaning in this item).
M&L, for cement concrete 1:2:4 type B-1 (using 20mm graded stone agg) as in benching, coping including necessary formwork, weathering slightly rounded or chamfered angles and throating complete all as specified and as directed.
M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface channels,drains and manhole foundation etc complete all as specified and as directed.
Taking down Cement Plaster from Brick or stone Wall,including Racking out Joints, hacking for Key, scrubbing down with Water etc., complete all as specified and as directed.
M&L for rendering 10mm thick on fair faces of wall finish even and smooth without using extra cement on concrete/brick surfaces in CM 1:6 complete all as specified and as directed.
M&L for rendering 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of wall, finish even and smooth without using extra cement on concrete/brick surfaces in CM 1:4 complete all as specified and as directed.
M&L for preparation of new plastered sufaces of ceiling and applying three coat of white wash complete all as specified and as directed.
M&L preparation of the new or old decorated surface of walls and applying 2mm thick Birla White cement putty and finishing the surface to even and smooth and applying two coat of oil emulsion distamper over a coat primer complete all as specified and as directed.
M&L for preparation of new plastered suface of wall and applying two coat of cement base paint on external surfaces over a coat of alkali resistant primer complete all as specified and as directed.
Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4 Sqm each etc complete all as specified and as directed.
Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each etc complete all as specified and as directed.
Taking down shutters of any description exc 1 sqm but n.exc 2 Sqm each etc complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for top rail, lock rail, botom rail and panelling of plain colour PVC sheet to be fitted in the MS frame welded/selaed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as specified and as directed by Engineer-in-charge.
S&F solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, complete all as specified and as directed
S&F aluminum anodized barrel tower bolts 150 mm long of extruded section & fixed etc complete all as specified and as directed
S&F aluminum anodized handles cast type anodized 150 mm size etc complete all as specified and as directed.
S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 100 mm size in toilet for PVC doors etc complete.
S&F 300mm long of alluminium sliding door bolt with hasp & staple (bolt type) with sand or die cast and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or brass door shutter complete all as specified and as directed by the Engineer-in-Charge.
S&F Pressed steel frames for doors(125x60) mm with one or more rebates including necessary fixing lugs, hinges, lock, strike plate, etc., complete all as specified and as directed.
S&F Pressed steel frames for doors(105x60) mm with one or more rebates including necessary fixing lugs, hinges, lock, strike plate, etc., complete all as specified , supplied and fixed etc complete.
Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick thick wall complete all as specified and as directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggt) as in filling in holes of hold fasts and back filling of chowkats complete all as specified and directed.
M & L secound class hardwood Plain, solid, straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F 18/19 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work etc complete all as specified and directed.
S&F 12mm commercial plywood,grade BWR,type BB,fixed with screws to timber frame work etc complete all as specified and directed.
S&F 12/19 mm Cover fillet of external teak wood lipping 6mm thick fixed with nail all as specified and directed.
S&F Hasp & staple safety type aluminium anodized with mild steel hing pin incl bolt to hing plate and fixed with screws 100mm size etc complete all as specified and directed.
S&Fof 35 mm thick 2nd class Hard Wood paneled door shutter factory made (two panel) with lock rail and panel of 9 mm thick B.W.P commercial plywood, the size of rail and stile is as per as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 35 mm thick IInd class HW partly paneled & partly gauged & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed.
S&F 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed
S&F galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed.
M&L for preparation new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer etc complete all as specified and as directed
S&F of CRC sheet box type steel window with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.
S&F of CRC sheet box type steel window with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.
S&F of CRC sheet box type steel ventilator with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.
S&F of CRC sheet box type steel ventilator with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded all as specified.
M&L framed work as grills, gratings, etc with ends of bars shouldered and or riveted into spikes or forged into spikes, framed guard bars, bared iron doors and similar work confirming to Fe 290 Gd-E-165 complete all as specified and as directed.
S & F 3 mm thick sheet glass, Ordinary quality and glazing with putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.
S & F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and as directed.
S & F in repair 3 mm thick sheet glass, Ordinary quality and glazing with putty or fixed in existing window and area of each pane not exc 0.5 Sqm in each pane complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and as directed
S & f of framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe-410-W (Gde-E-250) complete all as specified and as directed.
S&F, mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and as directed
M&L, preparing for new steel surfaces and applying two coats of synthetic enamel paint over one coat of red oxide primer over 10 cm width or girth complete all as specified and as directed.
S&F in repair vitreous china squatting pan “ORISSA” pattern of size 58X 44 (CM) star white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed.
S & F in repair 10 ltrs capacity PVC low level flushing cistern sleek plus single flush of colour star white complete all as specified and as directed.
S&F in repair vitreous china wash hand basin white (flat back) of size (550 x 400mm) including cutting for and pinning in ends and CI brackets complete Incl waster pipe and waste coupling complete all as specified and as directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed
S&F in repairs 15mm dia concealed stop cock regular body with flange complete all as specified and as directed.
S&F in repair 15mm bore cast copper alloy chromium plated angle cock with flange complete all as specified and as directed.
S&F in repair 15mm bore fancy type chromium plated bib cock long body with flange complete all as specified and as directed.
S&F brass CP mixer 15mm bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixed complete all as specified and as directed.
S&F in repair PVC floor trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified and as directed.
S&F CP towel ring complete all as specified and as directed.
S&F in repair 125mm brass CP shower rose with or without swivel joints including fixing down for iron pipe of union and fixed complete all as specified and as directed.
S&F stainless steel kitchen plate rack overall size 900mm x 900mm made out of 0.80mm thick stainless steel sheet etc complete all as specified and as directed.
S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete all as specified and as directed.
S&F in repair 25 mm dia CP curtain rod with CP brackets and knob at both end as per sample approved by Engineer-in-charge.
Demolition and breaking of drain pipes ( salt glazed ware AC/PVC/CI or Reinforced concrete set in cement mortar in floor or wall in 100mm diameter) complete all as specified and as directed.
S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or wall etc complete all as specified and direcetd.
S&F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or wall etc complete all as specified and direcetd.
S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and direcetd.
S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and direcetd.
S&F PVC (SWR) junction single (Single " T ") equal or un equal ,75mm bore with access door complete all as specified and direcetd.
S&F PVC (SWR) junction single (Single " T ") equal or un equal ,110mm bore with access doorcomplete all as specified and direcetd.
S&F PVC (SWR) vent Cowl 110mm bore complete all as specified and direcetd.
S&F MS Chromium plated peg set of five fix to wall complete all as specified and direcetd.
M&L for 100mm internal dia Salt-glazed stoneware drain pipe laid in trenches and joints complete all as specified and direcetd.
M&L for concrete bed to drain pipes of 150mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate including necessary shuttering and supports to concrete and for laying bends to falls complete all as specified and directed .
M & L for complete removal of existing treatment from surfaces of walls complete all as specified and as directed by the engineer-in-charge.
M&L for applying 2mm thick Birla White cement putty and finishing the surface to even and smooth all as specified and directed by the engineer-in-charge.
M&L for applying two coats of oil bound distemper to wall surfaces all as specified and directed by the engineer-in-charge.
M&L for preparing old decorated surfaces of wall and applying two coats of cement base paint complete all as specified and directed.
M&L preparing old plastered/unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L preparing old plastered/unplastered surfaces of wall and applying one coat of white wash complete all as specified and directed.
Taking down carefully unserviceable aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, lamp holders, sockets, fan regulators, wooden terminal box plastic laminated sheet cover from TW battens including TW batten or drawing from existing conduit removing including TW batten all as specified and as directed by Engr-in-Charge.
Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.
Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.
M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed .
Description same as per item No 149 above but one fan point controlled by one switch & regulator.
Description same as per item No 149 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.
Description same as per item No 149 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.
Description all as per item No 149 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.
S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.
S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.
S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.
S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.
S & F delux Fan Regulator electronic rotary, step type 240 Volt 50 Hz, complete all as specified as directed.
S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed
S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified as directed.
S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx 'B' to PS .
S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.
M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into conduit (Existing / new) including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and as directed Note:- (a) Two runs of 6 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) New conduit and conduit accossories shall be measured separately.
S & F regid non-metallic PVC conduit not less than 32 dia (external) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and as directed
S&F TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as out going no of modules DPX 125+12,complete all as specified and as directed.
S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar 8 ways 240 V complete all as specified and as directed .
S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , 'C' series, connected with copper lugs complete all as specified and as directed
S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series, connected with copper lugs complete all as specified and as directed.
Supply and fixing in repair 22W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge.
S&F in repair 10 W LED 6500K decorative LED Bulb with extruded polycarbonate, environmently friendly, energy efficient with integrated electronic driver and 10W LED lamp fitted including wiring upto and terminating into ceiling rose complete all as specified and directed.
Supply and fixing light fitting energy saving new generation 10W LED IP65 bulkhead luminaire with opal diffuser including electrically connecting using flexible cord 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm. Make: Havells cat. part. No LHEOAOP7UZ6W010 or equivalent make as mentioned in appendix B to PS..
Supply and laying XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 16 X 4 sq. mm complete all as specified and directed.
Supply and laying dry clean sand free from sharp materials, unscreened filling in trenches around under ground cables for cushioning complete all as specified and directed.
Supplying and laying precast concrete cable cover class LV type -I flat size 250x150x40 mm laid parpendicular to the axis of cable in trenches etc complete as directed.
Supply and fix M S body exhaust fans, copper wound, AC single phase 230/240V of size 300 mm sweep, 1400 RPM with louvre complete including with all arrangement of making holes on wall, making good and finishing of disturbed surfaces matching with the existing surfaces, necessary fixing arrangement such as fastener bolts, nuts, washers etc, of appropriate size all as specified and as directed
Supply and fix decorative wall light FLORET made up of high grade engineering plastic material suitable for 9 W LED lamp B22 base with bulb complete all as specified and as directed
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed.
S&F Ceiling fan copper wound, 1200mm sweep, BEE star rating,AC single phase 230 V including all arrangement like hook,pipe of suitable size all as specified and directed
M&L galvanised iron pipe of 50 mm dia, light grade ISI marked, complete with fittings laid in trenches/ fixed with poles etc as protection to cables complete as ditrected by Engineer in Charge.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
m/s gupta trading
m/s bobby enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .