Construction of 4 nos. Self-Supported Steel Roof Structures for Cargo building at Chandigarh International Airport Ltd., Mohali. S.H. Electrical Works

Amount

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. 8 way (4 + 24), Double door

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole and neutral 32 Amp = 9 Nos.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 6 Amp = 12 Nos 16 Amp= 16 Nos

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. Group C

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. Telephone socket outlet

Supply and fixing of following RJ-45 connectivity Simplex Faceplate with RJ-45 Gangbox, information outlet with shutter compliant to TIA 568A/B with colour coding complete.

Supply, Installation, Testing and Commisssioning of Wall mounted Fan suitable for operation on 220V, 50 HZ, single phase AC Supply with Aerodynamically designed semi transparent PP blades having higher air delivery, pull cord switch for speed regulation and oscillation control & minimal noise levels including all accessories as required. Sweep (400mm)

Supply Installation, Testing and Commisssioning of following sizes of heavy duty exhaust fan suitable for operation on 220V, 50 HZ, single phase AC Supply with anti corroisive treatment and attractive metallic finish, minimal noise levels including all accessories as per IS standard complete as required and suitable for installation at angle/support structure as specified. Sweep: (300 mm), 900 rpm

Supply, Installation, Testing and Commissioning of 100 W High bay LED light fixture (dia=26cm) of approved make having THD less than 10% with high pressure die cast housing having IP65 including all accessories as per relevent IS standard complete as required and suitable for installation at beam/angle/truss/support of Double height area of Cargo shed, as specified, similar to MAke: BAJAJ & Model:BGHBM 100W LED XE or equivalent.

Supply, Installastion, Testing & Comissioning of following fluorescent light fixtures with electronics ballast having THD less than 10% , with lamp(s) & complete with all accessories as required & specifed. 1 x 28 watt T5 Surface/pendent mounting T5 lamp luminaire PVC body channel with acrylicrecess mounted slim linear fluorescent light fixture complete with all accessories as required similar to Bajaj BTIP 128 ACR N 1x28W T5 or approved equivalent

Dismantling, Shifting and re-installation of 1.5/2 TR (3 Star) air cooled split airconditioning unit consist of outdoor unit, indoor unit, interconnecting insulated copper referigerant piping 3 mtr (appox), corded remote control, interconnecting power & control cables 3 mtr (aaprox) and refrigerant charging complete with all accessories i/c MS stand for outdoor unit or equivalent as required.

Supply of following size of 1.1KV grade multicore stranded aluminium conductor XLPE insulated & PVC sheathed armoured cable as per IS: 7098 (Part-1) 1988 complete as required & as per enclosed specification. (3.5 core, 35 Sq.mm. )

Supply of following size of 1.1KV grade multicore stranded aluminium conductor XLPE insulated & PVC sheathed armoured cable as per IS: 7098 (Part-1) 1988 complete as required & as per enclosed specification. (4 x 10 Sqmm)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 120 mm dia (OD-120 mm & ID-103 mm nominal)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 200 mm dia (OD-200 mm & ID-175 mm nominal)

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 400 sq. mm (82mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 95 sq. mm (45mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 X 35 sq. mm (32 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 10 sq. mm (25mm)

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 pair

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, armored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 10 pair

Supply and fixing telephone juntion box including tag block, cover plate fabricated out of 1.6 mm thick GI sheet suitable for housing following pair of krone type connectors complete as required. 10 pair

Supply and fixing telephone juntion box including tag block, cover plate fabricated out of 1.6 mm thick GI sheet suitable for housing following pair of krone type connectors complete as required. 50 pair

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 4 pair UTP CAT 6- 1 run of Cable

Dismantling,shifting and erection of 9 Mtr.Long OCTAGONAL street light pole & bracket with all accessories including installation of LED pole fixture & its connection from connector of pole to fittig by 3C X 2.5 sqmm wire, casting of cement concrete foundation of M-25 grade as per approved foundation drawing suitable for type of pole metioned Above including excavation of pit of required size, allignment of anchor plate, foundation bolts (supplied with pole to match with pole base plate),i/c providing and fixing of DWC pipe of size 50 mm OD & 38 mm ID as per IS 14930 part -II in the foundation pit for loop-in-loop-out cables to the pole complete as required and as specified. Pole with single Arm

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

FIRE EXTINGUISHER Supply of ISI marked portable fire extinguishers of following type complete as per enclosed specification and fixed / install as per site condition : Co2 type 4.5 kg capacity as per IS-15683:2006

Supply of ISI marked portable fire extinguishers of following type complete as per nclosed specification and fixed / install as per site condition : Water type of 9 liters capacity as per IS- 15683:2006

Supply of ISI marked portable fire extinguishers of following type complete as per enclosed specification and fixed / install as per site condition : Stored Pressure ABC Powder (MAP Base), of 10kg : IS- 15683 CE marked : MAP 90% as per IS 14609

FIRE HYDRANT Supply & fixing of Single headed external yard hydrant comprising of 100mm dia. stand pipe with bend , flange, 63mm dia. Gun Metal landing valve (ISI marked) conforming to IS-5290 (Type -B) with blank Gun-Metal cap & chain, cast iron wheel, complete as required and as per enclosed specification.

Providing & fixing 63 mm dia Gun Metal short Branch pipe with 20mm (nominal internal diameter) in size Gun Metal nozzle conforming to IS:903 suitable for instantaneous connection complete to inter-connect hose pipe, coupling etc. as required and as per enclosed specification.

Providing & fixing of MS Hose cabinet outdoor type of size 0.750Mx 0.600Mx 0.250M made of 2mm thick MS sheet with 6mm thick glazed glass doors i/c necessary locking arrangement suitable to accomodate 2nos 15m long hoses, one number branch pipe, etc. and mounted on wall or with raised brick platform. The cabinet shall be painted with red colour shade No. 536 of IS: 5 externally & white internally complete in all respects for external hydrant and as per enclosed specification

Providing & fixing 63mm dia., 15mtr. long RRL hose pipe (ISI Marked) with 63mm dia. male and female Gun-Metal couplings duly binded with GI wire, rivets etc. conforming to IS- 636 (Type-A) complete as required & as per enclosed specification.

Providing, laying, jointing, testing and commissioning of following sizes of MS heavy (Class C) pipes conforming to IS-1239 including cutting , threading welding etc. with all accessories like all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, nut, bolts and washer, two coats of Synthetic enamel paint of approved shade over a coat of primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. All pipe includes cost of supporting/fixing on floor / wall /ceiling with clamps, hangers (using anchor fasteners), MS angles/ channels of suitable size/specification. a) 150 mm

Providing, fixing and jointing including testing C- class heavy duty mild steel pipes conforming to IS-1239 upto 150 mm dia. & IS-3589 for sizes greater than 150 mm dia, including cutting, welding, fittings viz bends, tees, reducers, flanges, nut-bolts, gasket complete and laying in ground including excavation, providing PCC block support at interval and giving suitable treatment for corrosion by way of min. 4mm thick corrosion protection tape which shall be wrapped comprising of coal tar/ asphalt component supported on fabric of organic/ inorganic fibre as per IS-10221, re-filling the trench etc.as required and as per enclosed specification. a) 150 mm dia

Providing the services of impact Hilti machine/Breaker and Diamond cutter for cutting of pavment of Grade M-40 of minimum size 9m X 0.5m X 0.5m with operators including making good the damage with same Grade of pavement and removal of dismantled material from site.

FIRE ALARM SYSTEM Supply, installation, testing and commisssioning of UL listed (latest version) Conventional Type Fire Detection & Alarm panel of following loops in network connected to sensors, sounders, manual pull station and operating complete with all necessary hardware and software. Panel shall be completely networkable field programmable, and shall be complete with Central Processing Unit (CPU), Display interface assembly ( DIA), Loop interface board (LIB), Serial interface board (SIB) 30 key keypad, 160 Character LCD display with LCD/LED Backlite, main power supply, 24volts DC maintenance free battery and battery charger suitable 24 hrs normal working and it should be capable of operating for 2hrs during an emegency condition etc.

Supply, installation, testing & commissioning of UL Listed (latest version) Non motorised reflective optical Beam detector with built-in automatic gain control compensates for signal deterioration from dust buildup, complete as required & as per enclosed specification.

SITC of UL Listed (latest version) Wall Mounted Hooter-cum- strobe with minimum 90dB output and with required power supply converter (230VAC to 12/24 VDC) etc. as required.

SITC of the following UL Listed (latest version) conventional Fire Detection & Alarm system detectors & devices complete with connections, etc. as required. conventional multicriteria detector {Smoke + heat (fixed and rate of rise) } complete as required.

SITC of the following UL Listed (latest version) conventional Fire Detection & Alarm system detectors & devices complete with connections, etc. as required. UL Listed (latest version) Conventional Manual Pull station (not break glass type) complete as required.

SITC of UL Listed (latest version) Response Indicator (LED in polycorbonate housing) etc. as required.

Supply & laying (surface or in existing conduit) of Fire Survival Unarmoured Cable (300/500V) etc. as required. 2 x 1.5 Sq.mm.