NSTALLATIONOF ADDITIONAL SIGNAGES ATNATIONAL WAR MEMORIAL NEW DELH

Amount

Fabricating, Supplying, Fixing, Erecting and in position External Identification Signs in English & Hindi (bi-lingual) of overall size 2100 mm x 1500 mm fabricated out of a combination of 25 mm thick Beige & Red Colour Sand Stones base, the fabrication of signage comprising of calibration on back side of stones for even thickness for fixing and pasting of stones, cleaning the stone surfaces and applying water proofing chemical treatment using approved chemical of makes Dow Corning / Parma / Akemi on stones for protection, applying adhesive of makes KERAKOL - H-40 No Limit or equivalent of LATICRETE / Dr.Fixit on back side of sand stones and fixing the sand stones on 25 mm thick granite stone with and including edge cutting bevelling & polishing of sand stone using sand stone frmae of size 100mmx50mm rectangular with 6 Nos. 12mm dia hole shall be made in granite for fixing of 6 Nos stainless steel pins and studs shalll be used for fixing for signage. Etching letters of size 150 mm height, 4mm depth and 20mm line thickness in the beige colour sand stone and etching the design (as shown on drawing) in the red colour sandstone, epoxy enlay of red / beige colour in the etched letters and design on sand stones, complete with and including cost of development of prototypes / mock ups before final approval and production and all other components, accessories required for signage work as per best trade practices and all other incidental charges. Complete all as shown on drawing as specified and as directed by Engineer-in-Charge. (a ) For details of signage refer drawing for signage. (b) The signage will comprise External Identification Signs in English & Hindi (bi-lingual) of overall size 2100 mm x 1500 mm on both the faces of frame i.e two External Identification Signs in English & Hindi (bilingual) of overall size 2100 mm x 1500 mm. One unit of each set of this item will therefore comprise of front and back side signages as detailed above. (c) The civil work required is beyond the scope of this item and shall be measured separately. (d) Ref sketch No - 1. The front and back shall be same as per sketch -1 (e) Ref section A-A and plan of Drg details for fixing details .

Fabricating, Supplying, Fixing, Erecting in External / Internal Directional Totems in English & Hindi (bi-lingual) of overall size 1000 mm x 1500 mm fabricated out a combination of 25 mm thick Beige & Red Colour Sand Stones base, the fabrication of signage comprising of calibration on back side of stones for even thickness for fixing and pasting of stones, cleaning the stone surfaces and applying water proofing chemical treatment using approved chemical of makes Dow Corning / Parma / Akemi on stones for protection, applying adhesive of makes KERAKOL - H-40 No Limit or equivalent of LATICRETE / Dr.Fixit on back side of sand stones and fixing the sand stones on 25 mm thick granite stone with and including edge cutting bevelling & polishing of sand stone using sand stone frmae of size 100mmx50mm rectangular with 6 Nos. 12mm dia hole shall be made in granite for fixing of 6 Nos stainless steel pins and studs shalll be used for fixing for signage. Etching letters of size 150 mm height, 4mm depth and 20mm line thickness in the beige colour sand stone and etching the design (as shown on drawing) in the red colour sandstone, epoxy enlay of red / beige colour in the etched letters and design on sand stones, complete with and including cost of development of prototypes / mock ups before final approval and production and all other components, accessories required for signage work as per best trade practices and all other incidental charges. Complete all as shown on drawing as specified and as directed by Engineer-in-Charge. (a ) For details of signage refer drawing for signage. (b) The signage will comprise External Identification Signs in English & Hindi (bi-lingual) of overall size 2100 mm x 1500 mm on both the faces of frame i.e two External Identification Signs in English & Hindi (bilingual) of overall size 2100 mm x 1500 mm. One unit of each set of this item will therefore comprise of front and back side signages as detailed above. (c) The civil work required is beyond the scope of this item and shall be measured separately. (d) Ref sketch No - 2 to 14 (e) Ref section A-A and plan of Drg details for fixing details .

Fabricating, Supplying, Fixing and Erecting in position Cognitive Map of overall size 1600 mm x 1200 mm fabricated out of 50 mm thick Beige / Red Colour Sand Stone, the fabrication of signage comprising of calibration on back side of stone for even thickness for fixing and pasting of stone, cleaning the stone surface and applying water proofing chemical treatment using approved chemical of makes Dow Corning / Parma / Akemi on stone for protection, applying approved adhesive of makes KERAKOL - H-40 No Limit or equivalent of LATICRETE / Dr. Fixit on back side of sand stone and fixing the sand stone on Rcc pedestal including edge cutting, bevelling and polishing of Sand Stone, etc letter of size 17.57mm hight 3mm depth and 5mm line thickness complete Relief work 30mm deep in beige/red sand stone for cognitive map through CNC, epoxy inlay in some parts of map as per design requirement, complete with and including cost of development of prototypes / mock ups before final approval and production and all other components, accessories required for signage work as per best trade practices and all other incidental charges complete all as shown on drawing, as specified and as directed by Engineer-in-Charge. Note for Sl. Item No. 3 here-in-before: - (a) The civil work required is beyond the scope of this item and shall be measured separately. (d) Ref sketch No - 15 (e) Ref section A-A and plan of Drg details for fixing details .

Fabricating, supplying, Fixing ,Erecting in position information panels in English & Hindi (bi-lingual) of overall size 600 mm x 900 mm fabricated out of 1 mm thick stainless steel sheet (304 grade) with matt finish, screen printing of content and pasting on stainless steel sheet, covering the content with acrylic sheet for protection, making 4 Nos holes (6mm dia) in the SS sheet and fixing with SS pins and studs on steel gril / stone wall complete with and including cost of development of prototype / mock ups before final approval and production and all other components, accessories required for signage work as per best trade practices and all other incidental charges complete all as shown on drawing, as specified and as directed by Engineer-in-Charge. Ref sketch No - 17 to 20.

Fabricating, supplying, fixing, Erecting and in position timing panel for overall size 450 mm x 300 mm fabricated out of 1 mm thick stainless steel sheet (304 grade) with matt finish, screen printing of content and pasting on stainless steels sheet, covering the content with acrylic sheet for protection, making 4 Nos holes (6 mm dia) in the SS Sheet and fixing with SS Pins and studs on steel gril / stone wall complete with and including cost of development of prototypes/ mock ups before final approval and production and all other components, accessories required for signage work as per best trade practices and all other incidental charges. Ref sketch No - 16

Excavation in trenches not exceed 1.5 m wide and not exceed 1.5 m in depth for foundation etc in soft/loose soil.

Removing excavated material not exceeding 01 Km ( out side from the india gate hexagon ) and depositing where directed at a level not exceed 1.5 above the starting point.

Returning, filling including spreading levelling, watering and well ramming in layer not exceed 25 cm thick in soft/ loose soil

M&L cement concrete 1:2:4 type B2 using 40 mm graded agg in foundation filling and mass concrete

M&L reinforced cement concrete M-30 using 20 mm graded aggregate in foundation, footing, foundation beam, plinth beam & base for columns etc.Reinforcement bars shall be measured and paid seperately under respective item of Sch 'A'.

S & F TMT bars 10 mm dia and over cut to length, bent to shape required, including cracking, bending spirally for hooping to columns, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia or securing with clips

M&L beige colour granite tile ( same as per existing ) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete.

Dismantling granite slab of any description or thickness laid in floor and wall, jointed and pointed in cement mortar.

Dismantling stone/steel signages of any description

M&L 50 mm thick cement concrete 1:2:4 type B1using 20 mm graded aggregate

M&L 40 mm thick red sand stone slabs polished ,set and jointed in cement and stone dust mortar 1:3 and pointed in cement mixed with approved pigment to match the existing stone slabs

M&L red sand stone Kerb stone 450 x150x300 mm with all surfaces hammer dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 20 mm jointed in cement mortar 1:6 complete all as specified

Fabricating, Supplying, Fixing and Erecting in position parking signage for handicapped of overall size 600 mm x 900 mm fabricated out of 1 mm thick Stainless Steel sheet (304 Grade) with matt finish, Screen printing of content and pasting on stainless steel sheet, covering the content with acrylic sheet for protection, making 4 Nos holes (6mm dia) in the SS sheet and fixing using SS pins and studs on 50mm dia and 3m hight SS pipe (2 No pipe) complete with and including cost of development of prototypes / mock ups before final approval and production and all other components, accessories required for signage work as per best trade practices and all other incidental charges complete all as shown on drawing, as specified and as directed by Engineer-in-Charge.

Fabricating , supplying and fixing 2 mm thick mild steel plate of size 1100 mm x 100 mm with and including laser cutting for 5 mm dia holes @ 20 mm centre to centre in each plate for spikes incl supplying, fixing and welding 5 mm dia and 25 mm high mild steel rod spikes welded in the holes of the plate and fixing on sandstone with 08 Nos 5 mm dia and 25 mm long MS screws complete.

Fabricating , supplying and fixing 2 mm thick mild steel plate of size 2200 mm x 100 mm with and including laser cutting for 5 mm dia holes @ 20 mm centre to centre in each plate for spikes incl supplying, fixing and welding 5 mm dia and 25 mm high mild steel rod spikes welded in the holes of the plate and fixing on sandstone with 14 Nos 5 mm dia and 25 mm long MS screws complete.

Shree Ayyappa Engineering