PROVN OF VEHICLE EQPT REPAIR SHED AT WKSP KLP OF 282 I FIELD WKSP COMPANY EME AND PROVN OF AREA DRAINAGE FROM LIKABALI AUDITORIUM TO SHORT FIRING RANGE AT BRICHGUNJ MILITARY STATION PORT BLAIR

Amount

Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level

Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed withearth around, in layers n.exc 25 cm, watering and removing surplus soil to a distence n.exc 50 m and making good surface.

M&L PCC 1:3:6 Type type C2 (1:3:6) (40 mm graded stone aggregate) as inCement concrete in foundations,filling and mass concrete complete all as specified and directed by Engr-in-charge.

M&L precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in CM 1:6 complete all as specified and directed by Engr-in-charge.

M&L for rendering 10mm thick on fair faces of brick/concrete surface in CM (1:6) finished even and smooth without using extra cement.

M & L for 100mm thick PCC Type D-2 (1:4:8) Using 40mm graded stone Agg as in flooring of Heavy veh parking of Hard standing complete all as specified and directed by Engr-in-charge.

M & L for 100mm thick PCC Type B-2 (1:2:4) Using 40mm graded stone Agg as in flooring of Heavy veh parking of Hard standing complete all as specified and directed by Engr-in-charge.

M&L for 80mm thick coloured machine pressed precast concrete interlocking paver block glossy finished any size and shape conforming to IS 15658-2006 M40 Grade with grey cement and pigment over sand filling complete all as directed.( Cost of Sand will be measured and paid separately)

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-charge.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc and fixed by riveting or welding or with nut and bolts (including nuts and bolts) conforming to Fe-410-W grade E250 Quality B complete all as specified and directed by Engr-in-charge.

S&F steel works in tubular/ posts/ trusses/ purlin including special shaped washer etc. complete using ERW or onduction butt welded tubes conforming to IS 1161-1797 grade St 240 complete all as specified and directed by Engr-in-charge.

Supply and fix Mild steel Bolts Exceeding 12mm and not exceeding 20mm dia, purpose made with Hexagonal or Square head one end and screwed the other, or Screw both ends, each screwed end to be fitted with Washers and one hexagonal or Square nut, Exceeding 30 cm long complete all as specified and directed by Engr-in-charge

M & L For prepatring steel / Iron surfaces of any description exc 10cm Width or Girth and applying two coats of synthatic enamel paint over one coat of Redoxide primer complete all as specified and directed by Engr-in-charge.

S&F 0.50 mm thick pre painted galvalum aluminium zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws complete all as specified and directed by Engr-in-charge.

S&F 0.50 mm thick pre painted galvalum aluminium zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws complete all as specified and directed by Engr-in-charge.

S & F Milld steel works as in wind ties for roof including securing bolts etc complete all as specified and directed by Engr-in-charge.

M & L For prepatring steel/ Iron Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint two coats of synthatic enamel paint over one coat of Redoxide primer complete all as specified and directed by Engr-in-charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation and getting out in soft / Loose soil.

M&L for Cement concrete in fdn of drains concrete type D-2 1:4:8 using 40mm graded aggregate.

M&L precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in CM 1:6 complete all as specified and directed by Engr-in-charge.

M & L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work and finished the surface fair and even complete all as specified and directed by Engr-in-charge.

M&L PCC 1:3:6 type C-2 (using 40mm graded agg) as in Copings.

M&L PCC 1:3:6 type C-2 (using 40mm graded agg) as in surface channels and drains.

Extra for forming fair finished surfaces of drain 30 cm inner grith in cement concrete using extra cement including forms mouldy mittered/ stopped ends.

M&L for Concrete bed to drain pipes including packing under, and completely surrounding pipes with concrete after they are laid and tested in cement conrete 1:3:6 type C-2 around 450mm dia complete all as specified and directed by Engr-in-charge.

S & F 450mm dia reinforced concrete pipes, class NP2, laid if floors and jointed complete with collars all as specified and as directed by Engr-in-charge.

Returning, filling in any type of soil , including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-charge.

Removing excavated material of any type of soil exc. 50 m and depositing where directed at a level nexc 1.5m above the starting point.

Prasur Electricals & Engineering Co.

MAJUMDAR FURNITURE

RPG AND COMPANY

S K ENTERPRISES

P Babu

Nirman Construction Company

M/s Kamal Electrical

RS ENGINEERING WORK

DEEPAK AGENCIES