Special repair to block No. 1 and 2 teachers colony near Govt. Boys Sr. Sec. School Lalpani Shimla. (SH- Repair of roof, walls, Shutters, Barbed wire fencing, painting and distempering etc.)

Amount

Excavation in foundations, trenches etc. in all kinds of earth work including saturated soil comprising of pick work, jumper work and blasting work both in soft and hard rock with chiesling and wedging out of rock (where blasting is prohabited) and their intermediate classification of soil including dewatering whereever required, settling out to required lines, levels as shown on the drawing and directed by the Engineer in charge at site according to the HP.PWD specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at approved dumping site of M.C. Shimla or otherwise including payment of prescribed charges of dumping to the owener of dumping site through all modes of transporation including head load animal load or mechanical means alongwith its levelling, fine dressing and with all kinds of labour, mechineries, tools, equipment and safety measures and incidental necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent. Any loss to the public and private properity during the course of execution and disposal of servicable and unservicable materials shall be the absolute responsiblity of the contractor and shall have to be duly compensated by him in all respects to the satisfaction of Engineer in Charge.

Excavation in earth work in drains and channels in all depths in all kinds of soils, including saturated soil comprising of pick work, jumper work and blasting work both in soft and hard rock with chiesling and wedging out of rock (where blasting is prohabited) and their intermediate classification of soil including dewatering whereever required,settling out to required lines,levels as shown on the drawing and directed by the Engineer in charge at site according to the HP.PWD specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at approved dumping site of M.C. Shimla or otherwise including payment of prescribed charges of dumping to the owner of dumping site (dumping site to be arranged by the contractor himself) through all modes of transporation including head load animal load or mechanical means alongwith its levelling, fine dressing and with all kinds of labour, mechineries, tools, equipment and safety measures and incidental necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent. Any loss to the public and private properity during the course of execution and disposal of servicable and unservicable materials shall be the absolute responsiblity of the contractor and shall have to be duly compensated by him in all respects to the satisfaction of Engineer in Charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering,strutting and propping etc.with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like including carriage of materials within all leads and lift :-Floor etc. upto 200mm in thickness.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like.

Providing and laying cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 40 mm nominal size) in foundations and plinth and curing complete excluding cost of centring and shuttering including carriage of materials in all leads and lifts.

Providing and laying cement concrete work 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) mechanically mixed and curing complete, excluding cost of form work in (a) foundation and plinth, including carriage of materials in all leads and lifts.

Walls including attached buttresses,pilasters and their caps and bases string courses etc. upto all floor level including carriage of materials in all leads and lifts.

Providing and laying cement concrete work 1:2:4 (1 Cement:2 Sand:4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Suspended Floor roofs, landing and shelves and their support balconies, beams,girders, bressumers and contilever upto al floor level including carriage of materials within all leads and lifts.

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto all floor level including carriage of materials within all leads and lifts. : Tor Steel :

Brick work using common burnt clay building bricks in Super-structure Cement in Mortar 1:6 (1 Cement : 6 Sand).Second Class Bricks including carriage of materials within all leads and lifts.

Half brick masonry in common burnt clay building bricks in super-tructure above plinth level upto floor two level.Cement Mortar 1:4 (1 cement:4 sand) Second Class Bricks including carriage of materials within all leads and lifts.

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought,framed and fixed in position. complete including carriage of materials within all leads and lifts in 2nd class deodar wood.

Providing wood work in frames of false ceiling, partition etc. sawn and and putup in position including carriage of materials within all leads and lifts.(a) Second class deodar wood.

Second class Chil/ Rai wood.

Providing wood work in trusses, purlins, rafters, posts, post plates, wall plates and the like wrought framed, hoisted and fixed in position. complete including carriage of materials within all leads and lifts :-2nd class deodar wood.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows Including black enamelled iron butt hinges with necessary screws:- 35mm thick 2nd class deodar wood.including carriage of materials within all leads and lifts

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 35 mm thick 2nd class deodar wood.including carriage of materials within all leads and lifts

Providing and fixing plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) 6 mm thick.

Providing and fixing 0.63 mm thick PGI sheet ceiling/lining of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) including carriage of materials within all leads and lifts.

Providing eaves board 200mmx25mm thick including fixing in position in 2nd class deodar wood.including carrage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing weather board 100mmx25mm thick including fixing in position 2nd class deodar wood.including carrage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing hard wood plain square edged cover fillets (beading) 40mmx12mm section with wood screws in ceiling and lining including mitring at junctions including carriage of materials in all leads and lifts.

Providing and fixing hard wood plain square edged cover fillets (beading) 60mmx12mm section, with wood screws in ceiling and lining including mitring at junction including carriage of materials within all leads and lifts.

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws including carriage of materials within all leads and lifts.(a) Plain grill.

Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block30x10x15cm. 1:3:6 ( 1 cement : 3 sand:6 graded stone aggregate 20mm nominal size) including carriage of materials within all leads and lifts

Providing and fixing M.S C.P sliding door bolts with screws and nuts etc complete including carriage of materials within all leads and lifts :-250 X 16 mm

Providing and fixing aluminium tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etc. completeincluding carriage of materials within all leads and lifts:-(i)200 X 10 mm size.

150 X 10 mm size.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete including carriage of materials within all leads and lifts:-125 mm size.

Providing and fixing bright finished or black enamelled iron (Helical door spring 150 mm). complete including carriage of materials in all leads and lifts :- 150 mm size

White glazed tiles 6mm thick of approved size, shade and design in skirting risers of steps and dado 12mm (Twelve milimetre) thick cement mortar 1:3(One cement is to Three Sand) and jointed with cement slurry. including carriage of materials within all leads and lifts.

Providing and fixing glass strips in joints of terrazzo/ cement concrete floors.40mm wide and 4mm thick including carriage of materials in all leads and lifts

40 mm thick.Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of materials within all leads and lifts .

Providing and laying marble work (Table rubbed and polished) in flooring 20mm. thick base in cement mortar 1:3(1cement:3sand) including jointing with cement mortar 1:2(1 white cement:2 marble dust) with an admixure of pigment to match the shade of the marble. 20 mm thick Baroda green marble including carriage of materials within all leads and lifts.

Providing and laying ceramic tiles of approved size, shade and design in flooring, treads of steps laid on a bed of 12 mm thick cement mortar 1 : 3 ( 1 cement : 3 sand) finished with flush pointing in white cemen including carriage of materials within all leads and lifts.

Providing corrugated G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I.limpet washers filled with white lead complete excluding the cost of purlins refters and trusses including carriage of materials within all leads and lifts. 0.63 mm thick sheet.

Providing ridges or hips 60 cm over all in plain G.I.sheet with galvanised iron J or L hooks. bolts and nuts 8mm dia G.I. Limpet and bitumen washers copmlete including carriage of materials within all leads and lifts.0.63 mm thick sheet.

Providing and fixing 20 cm. wide 90 cm. overall semicircular plain G.I. sheet gutter with bolts, nuts and washers etc. including making necessary conections with rain water pipe complete as per design complete including carriage of materials within all leads and lifts :- 0.63 mm thick sheet.

Providing and fixing on wall face PVC (finolex) type-A rain water pipes with collar and clamps etc. of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete 110mm dia pipes including carriage of materials within all leads and lifts.

Providing and fixing on wall faces PVC (finolex) type-A accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts. (i) PVC Plain bend 110mm dia.

PVC Plain shoe 110mm dia

Providing and fixing PVC (finolex) cowl including carriage of materials within all leads and lifts :-110mm nominal diametre

Steel work welded in built up sections, including hollow section trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint In gratings framed guard bars, ladders, railling, brackets and similar works including carriage of materials within all leads and lifts

Painting two coats (excluding priming cost on new steel and other metal surfaces with enamel paint brushin to give an even shade including cleaning the surface of all dirt, dust and other foregin matters Enamel paint other than white including carriage of materials within all leads and lifts.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting Readymixed paint brushing wood primer pink.including carriage of materials within all leads and lifts.

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stoping With white enamel paint including carriage of materials within all leads and lifts.

Painting one coat(excluding priming coat)on previously painted wood and wood based surfaces with enamel paint to given and even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping including carriage of material in all leads and lifts:--(a) With white enamel paint

With enamel paint other than white

Extra for every subsequent coat of paint on previously painted wood and wood based surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter including carriage of material in all leads and lifts:--(a) With white enamel paint

With enamel paint other than white.

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth InCement Mortar 1:6 (1Cement:6 Sand).including carriage of materials within all leads and lifts.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in Cement mortar 1:6 (1 cement : 6 sand) including carriage of materials within all leads and lifts.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth.i/c Priming coat with distemper primer.including carriage of materials within all leads and lifts.

Distempering (one coat) with oil bound washable distemper of approved brand and manufature and of required shade, on decorated wall surfaces to give an even shade, after thoroughly brushing the surface clean of all grease, dirt, loose pieces of scales and also including preparing the surface even and sand papered smooth including carriage of materials in all leads and lifts.

Extra for every subsequent coat of oil bound washable distemper of approved brand and manufature and of required shade, on decorated wall surfaces to give an even shade, after thoroughly brushing the surface clean of all grease, dirt, loose pieces of scales and also including preparing the surface even and sand papered smooth including carriage of materials in all leads and lifts.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including carriage of materials within all leads and lifts.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on decorated wall surfaces (one coat) to give an even shade after thoroughly brushing the surface to remove all dirt, loose or softened paint including carriage of materials in all leads and lifts..

Extra for every subsequent coat of water proofing cement paint of approved brand and manufacture and of required shade on decorated wall surfaces (one coat) to give an even shade after thoroughly brushing the surface to remove all dirt,loose or softened paint including carriage of materials in all leads and lifts..

Repairs to plaster in patches of 2.50 Sqm. and under and 10 to 15 mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground including carriage of materials within all leads and lifts in cement Mortar 1:6 (1 cement:6 sand).

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary including carriage of materials within all leads and lifts:-Plain Glass:4mm thick.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials within all leads and lifts.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size) including carriage of materials within all leads and lifts.

Supply and fixing galvanized steel bar-bed wire (IS:278-1962 Type-I) weighing 9.38 kg per 100 metres (minimum) straining and fixing to any type of standard rails, straining bolts including securing with and provision of galvanized mild steel wire, staples or Steel pins etc. as directed (posts and struts of wood concrete, steel etc. and straining bolts shall be paid for seperately) including carriage of materials within all leads and lifts .

Providing and fixing M.S welded mesh 25x25x2mm to angle iron frame work complete including welding by electric plant and including applying a priming coat of red lead paing and as per the direction of Engineer-in-Charge including carriage of materials within all leads and lifts.

Demolition above G.L.upto all floor level including disposal of unserviceable materials within all leads un-reinforced cement concrete upto all thickness including carriage of materials within all leads and lifts.

Dismantling of wooden floors upto all floor level including stacking of serviceable materials and disposal of un-serviceable materials within all leads (joists to be measured and paid for separately) including carriage of materials in all leads and lifts.

Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials within all leads and lifts.G.I. Sheet roofing

Taking out doors, windows and clerestory windows shutters (steel or wood) including stacking within all lead Not exceeding 3 sqm in area including carriage of materials within all leads and lifts.

Providing and fixing 15mm nominal bore to wall ceiling and floors galvanised mild steel tubes (Medium grade), tube fittings and clamps including making good the wall ceiling and floor complete including carriage of materials within all leads and lifts.

Providing and fixing vitreous China wash down, water closet squatting pan (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads and lifts :-Orissa Pattern.

Providing and fixing C.P. waste for wash basin or sink including carriage of materials within all leads and lifts :-32 mm dia

Providing and fixing 15mm dia C.P. brass bib tap with capstan head including carriage of materials within all leads and lifts.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.including carriage of materials within all leads an lifts :- a)110 mm X 90 mm nominal diametre.

75 mm X 90 mm nominal diametre.

Providing and fixing high pressure PVC (Finolex) type-A spigot and socket, waste and ventilating pipes including collar and clamps ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-(i) 110 mm dia.

75 mm dia.

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete:-(i) 110 mm dia.

75 mm dia.

Providing and fixing PVC(finolex) plain single equal branch with oval access door, insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads an lifts- (i) 110 mm nominal size.

75mm nominal size.

Providing and fixing PVC (Finolex) collars ISI marked including fixing with approved adhesive etc.complete including carriage of materials within all leads and lifts:-110 mm dia.

75 mm dia.

Providing and fixing PVC (finolex ) Plain bends of required degree (any radius) including fixing with approved adhesive etc.complete, including carriage of materials within all leads and lifts.(i) 110 mm nominal size.

75mm nominal size.

Providing and fixing PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc.complete including carriage of materials within all leads and lifts:-110 mm dia.

Providing and fixing steel sink 600mmx450mmx150mm steel kitchen sink with C.I. or M.S. brackets and other required accessories required for fitting including cutting holes in walls and making good the same including fitting etc. complete including carriage of materials within all leads and lifts.

Providing and fixing 10.00 letre capacity PVC low level flushing cistern with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and ovrflow pipe, 40mm dia C. P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately including carriage of materials within all leads and lifts.

Providing & fixing 32mm dia, PVC waste pipe for wash basin or sink including carriage of materials within all leads and lifts.

Constructing manhole with RCC top slab in 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete1:4:8 (1cement : 4 sand :8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing: I) Inside size 800mm x 800mm and 500mm deep including pre-cast R.C.C. manhole cover 600mm dia with frame. (a) With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 Sand) including carriage of materials within all leads and lifts.

Providing and fixing 100mm C.P. grating for gully, floor or Nahni trap including carriage of materials within all leads and lifts.

BALDEV