REPAIR TO INTERNAL WIRING AND REPLACEMENT OF ELECTRICAL FITTING IN CERTAIN MD ACCN LESS COMPREHENSIVE MAINT BLDGS UNDER GE (A) SURATGARH AT SURATGARH MIL STN.

Amount

Taking down carefully or drawing out from conduit, existing copper / aluminium point wiring for light, fan, bell, socket, power point etc complete including fixture and fittings such as switches, sockets, ceiling rose, pendent holder, light fittings, top sheet covers, fan regulators and making good the disturbed surfaces of wall/ceiling complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 02 here-in-before but for One 3 pin 5 Amp socket outlet on the same board with other switches.

All as per serial item No. 02 here-in-before but for One 3 pin 5 Amp socket outlet on independent board.

All as per serial item No. 02 here-in-before but for One light point controlled by Two 2- way switches.

All as per serial item No. 02 here-in-before but for One bell or buzzer point controlled by by one push button on same board with other or independent switches

All as per Srl item No. 02 here-in-before but wiring with cable of cross sectional area 4.0 Sqmm (nominal area) multi-stranded copper conductor FRLSH, PVC unsheathed cable 1100 Volts for one socket outlet 3 pin, 15/16 Amps on independent board including 4.0 Sqmm PVC insulated multistandard unsheathed copper conductor wire as earth continuity to common earth dolly.

S&F Modular switch piano flush type 6 Amps single pole, one way, complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand Model Myrius/Honeywell Model ORNA or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F Modular socket flush type 2 / 3 pin, 6 Amps, 230 volts, complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand Model Myrius/Honeywell Model ORNA or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F Modular switch piano flush type 5/6 Amps single pole, two way, complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand Model Myrius/Honeywell Model ORNA or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F Modular switch piano flush type 15/16 Amps single pole, one way, complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand Model Myrius/Honeywell Model ORNA or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F Modular socket flush type 2 / 3 pin,15/16 Amps, 230 volts, complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand Model Myrius/Honeywell Model ORNA or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F Modular bell push piano flush type 6 Amps single pole, one way, complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand Model Myrius/Honeywell Model ORNA or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F Modular electronic step type fan regulator suitable for ceiling fan of 1200mm / 1400mm sweep,2 Module complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand Model Myrius/Honeywell Model ORNA or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

M&L for point wiring complete with 2.5 Sqmm (nominal cross section area) FRLSH PVC insulated multistranded unsheathed copper conductor cable drawn in and including concealed PVC rigid conduit medium grade 25 mm dia, pipe hooks, elbows, junction covers and junction boxes including cutting chases in walls and making good the disturbed surfaces of wall with all jointing accessories including provision of pressed steel sunken terminal boxes made of 1.2mm thick pressed steel sheet, 60mm deep of suitable length and painted with red oxide primer including 2.5 Sqmm PVC insulated multistranded unsheathed copper conductor wire as earth continuity to common earth and connecting to earth dolly for one light point, fan point controlled by one switch complete all as specified and directed by Engineer-in-Charge.Make of Cable: Havells/Finolex/L&T or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after.Make of Conduit :Supreme/AKG/ Finolex or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

All as per serial item No. 15 here-in-before but for One 3 pin 5 Amp socket outlet on the same board with other switches.

All as per serial item No. 15 here-in-before but for One 3 pin 5 Amp socket outlet on independent board.

All as per serial item No. 15 here-in-before but for One light point controlled by Two 2- way switches.

All as per serial item No. 15 here-in-before but for One bell or buzzer point controlled by by one push button on same board with other or independent switches

All as per Srl item No. 15 here-in-before but wiring with cable of cross sectional area 4.0 Sqmm (nominal area) multi-stranded copper conductor FRLSH, PVC unsheathed cable 1100 Volts for one socket outlet 3 pin, 15/16 Amps on independent board including 4.0 Sqmm PVC insulated multistandard unsheathed copper conductor wire as earth continuity to common earth dolly.

S&F switch piano flush type 6 Amps single pole, one way, complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand/philips or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F socket outlet 2 / 3 pin, 6 Amps, 230 volts, complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand/philips or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F switch piano flush type 6 Amps single pole, two way, complete all as specified and directed by Engineer-in-charge.Make :Havells (Crabtree)/Legrand/philips or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F switch piano flush type, 15 Amps, 240 volts, flush type complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand/philips or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F socket outlet , 3 pin, 5/6 Amps, 230 volts, flush type complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand/philips or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F switch socket combination 3 pin, 5 Amps, 240 volts, flush type complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand/philips or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F switch socket combination 3 pin, 15 Amps, 230 volts, flush type complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand/philips or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F electronic step type fan regulator suitable for ceiling fan of 1200mm / 1400mm sweep,2 Module complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand/philips or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F bell push, flush type, 5 Amp, 230 Volts grade complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand/philips or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F electric bell (ding - dong), AC, 230 Volts, Single pole & connecting up complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand/philips or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F Lamp holder, insulated body with back plate etc complete all as specified and as directed by Engineer-in-Charge. Make :Havells (Crabtree)/Legrand/philips or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand/philips or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F as in repair sheet metal plug & socket DB, SP, with a two pin and earth plug with socket, 230 Volts with & including one MCB SP ‘C’ Curve 10 kA, 20 Amps complete all as specified and directed by Engineer-in-charge. Make :Legrand/Schneider/L&T or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

M&L for Sub main wiring complete with 2 single core 6 Sqmm (Nominal area) multi stranded copper conductor PVC insulated unsheathed cable FRLSH drawn in medium duty PVC conduit ISI marked not less than 25mm dia concealed including single core multistranded copper conductor 6 Sqmm size cable as earth continuity wire drawn in same conduit including taking down old unsv complete all as specified and directed by Engineer-in- charge Make of Cable: Havells/Finolex/L&T or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after Note : Two runs of 6 Sqmm single core cable and one run of 6 sqmm copper wire earth continuty conductor and conduit with fittings shall be measured as one length.

Taking down old unsv LED Lights fittings and supply and fix new LED light fittings of following :-

(a) S&F Energy efficient decorative ultra slim, prewired, lumiline 20 watt LED light fitting (Day cool light), batten type with drive & polycarbonate housing including tube rod and all accessories prewired fixed on wall / hanging complete all as specified and as directed by Engineer-in-charge. Make : Havells Cat Part No.:- LUMLINENXTBS20W LED8655PCWH/Crompton Cat Part CCS-103-20-65-SL-DP-NWH/Wipro Cat Part D532065 or equivalent cat part of Make as specified in Appendix "A".

(b) S&F Energy efficient decorative ultra slim, prewired, lumiline 10 watt LED light fitting (Day cool light), batten type with drive & polycarbonate housing including tube rod and all accessories prewired fixed on wall / hanging complete all as specified and as directed by Engineer-in-charge. Make : Havells Cat Part No.:- LUMLINENXTBS10W LED8655PCWH/Crompton Cat Part CCS-103-10-65-SL-DP-NWH/Wipro Cat Part D531065 or equivalent cat part of Make as specified in Appendix "A".

(c) S&F Bulk Head wall light fixture 9/10 Watt Environment Friendly Energy saving Edge Lit LED luminare of high brightness IP 65 Protection wall mounted, complete all as specified and as directed by Engineer-in-charge.Make : Crompton Cat No CIS-306-10-57-SL-DP-NBK/WIPRO/HAVELLS Cat No RUGBYGENXFTSIOWLED8655PCWH or equivalent Technocommercial cat part of Make as specified in Appendix "A".

(d) Supply and fixing LED lamp minimum 3 star rated 10W LED B-22 base complete all as specified and directed by Engr-in-Charge with following specifications (a) Lumen system efficacy of lamp should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 45°C (d) Power factor : Minimum 0.90 (e) CRI : Morethan 80 Make : Havells Cat No LHLDDEBNL5R10/WIPRO/PHILLIPS/CROMPTON or equivalent Technocommercial cat part of Make as specified in Appendix "A".

(e) Supply and fixing LED luminaire surface/ceiling light, 12 watt, 220 V AC recessed type with opal diffuser complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make : Havells Cat Part No.:- LHEABMP7UL1W012/Crompton Cat Part LCDSPLN-R-12CDL/Wipro Cat Part D641265 or equivalent cat part of Make as specified in Appendix "A".

(f) S&F LED Bollard 08 Watt IP65 cone series acts as imposing street furniture . The elegant yet minimailistic design acts a silent observer and giving light, diffuser at the upper portion adds fucctional Value into landscape environmental with all accessories complete all as specified and as direcetd. Make :- Havells Cat Part No. CONEBLS8WLED830PSYMTOPC or Equivalent technocommercial cat part as specified in Appendix 'A'

(g) S&F Energy efficient 4 feet, 20W LED, light fitting with three colours in one LED (Day Cool , Warm white & Natural White) batten scene with switch tubelight type with drive & polycarbonate housing & complete with all accessories complete all as specified and as directed.Make : Crompton /WIPRO/BAJAJ or equivalent Technocommercial cat part of Make as specified in Appendix "A".

(h) S&F Decorative wall light, gold finish fixtures with white glass diffuser suitable for 7.5 LED filament lamp E27 base including 02 Nos of 7.5 LED warm white filament LED lamp with E27 base complete all as specified and as directed Make :HAVELLS cat No LHFOAKD2TZ1D060/ Crompton /WIPRO or equivalent Technocommercial cat part of Make as specified in Appendix "A".

(j) Supply, fixing and testing LED Street / Security light fitting of 30 Watt, 5700K - 6500 K (including LED drive and internally prewired) complete with body robust, corrosion resistant, superior finish and without any cracks or through holes, made in a single piece by high pressure die cast aluminum alloy. The luminaries shall be monolithic construction totally enclosed dust and water proof with IP -65 / 66 protection as per IS - 10322-1982(Part -I) with latest amendments and input voltage range 140 - 300 V, AC, frequency 50 - 60 Hz ,P.F should be more than 0.9 with Total Harmonic Distortion THD(I) less than 15% ,cool white colour and lamp starting time should not be more than 10 second including 10 KV surge protection in built or external. Driver should be constant current constant voltage driver. Driver should have high voltage withstanding capacity upto 300 V, AC. Driver should also have double phase protection, no load , open circuit and short circuit protection .LED light fitting should be suitable for ambient temperature from -10 degree Centigrade to 50 degree Centigrade and humidity level 10% to 90 % RH. Covers should be polycarbonate/toughened glass to ensure minimum IP 65 degree protection. Cover should not degrade due to heating and ageing. The efficiency of LED luminaries system shall be more than 100 lumens per watt and must be certified by the LM-79 test report and including connection for street light from ceiling rose with 1.5 Sqmm, 3 core PVC insulated stranded copper conductor FRLSH cable, 1100 Volts grade ISI marked including in bracket (if required) for fixing light fitting complete all as specified and directed by Engineer-in- charge.Make :Havells Cat Part No ENDURASUNBEAMSL30W LED75ASYBOPCSENSO Crompton Cat No TRP-415-30-57-SL-LM-NBK/Wipro Cat No D912065 or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F as in repair flush mounting factory made SPN DB 8 way, 240 Volt, Double door, IP-43 protection, IK-09 with metal door with 200 Amps copper bus bar, with neutral bar, earth bar and cables ties for cable management fully insulated bus bar complete all as specified and directed by Engineer-in-charge. Make :Legrand/Schneider/L&T or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F as in repair flush mounting factory made VTPN DB 4 way, 415 Volt, Double door, IP-43 protection, IK-09 with metal door with 200 Amps copper bus bar, with 02 neutral bar, 02 earth bar and cables ties for cable management fully insulated bus bar complete all as specified and directed by Engineer-in-charge.Make :Legrand/Schneider/L&T or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F as in repair flush mounting factory made TPN DB 4 way, 415 Volt, Double door, IP-43 protection, IK-09 with metal door with 200 Amps copper bus bar, with 02 neutral bar, 02 earth bar and cables ties for cable management fully insulated bus bar complete all as specified and directed by Engineer-in-charge.Make :Legrand/Schneider/L&T or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F in repair/replacement of below mentioned MCBs / MCCBs/ELCB of following type and capacity as per directed by Engr-In-Charge:-Make :Legrand/Schneider/L&T or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

(a) S&F as in replacement MCB 6 to 32 Amps, Single Pole 240 Volts, 10 KA, ‘C’ Curve, complete all as specified and directed by Engineer-in-charge.

(b) S&F as in replacement MCB 40 - 63Amps, Single Pole & neutral 240 Volts, 10 KA, ‘C’ Curve, complete all as specified and directed by Engineer-in-charge.

(c) S&F replacement MCB 40 to 100 Amps, Four pole, 415 Volts, 10 KA, ‘C’ Curve, complete all as specified and directed by Engineer-in-charge.

(d) S&F in replacement of MCCB, 125 Amp,4 Pole,16KA, 415 volts with fixed thermal magnetic release complete all as specified and directed by Engineer-in-charge.

(e) S&F as in replacement of ELCB (RCCB), 40 Amp, Double Pole ,240 AC volt, having 300 mA, 10kA for earth leakage current tripping capacity complete all as specified and directed by Engineer-in-charge.

(f) S&F as in replacement of ELCB (RCCB), 40 Amp, Double Pole ,240 AC volt, having 300 mA, 10kA for earth leakage current tripping capacity complete all as specified and directed by Engineer-in-charge.

S&F in repair/replacement LED post top light fitting 40 watt, decorative design, glare free and better uniformity, complete fitting with all accessories and LED lamp, fixing on existing GI pipe system or as directed by Engineer-in-Charge including making electric connections complete fitting with all accessories and specifications and all as directed by Engr-in-Charge. Make :- Crompton Cat Part No. LPTO-40-WW-M/ Wipro Cat Part No. LP07-501-XXX-57CDL or equivalent technocommercial cat part as Appendix 'B'

S&F as in repair street light bracket made out of 32mm dia GI pipe light grade 1.20m long , bent to shape at 120 degree angle from vertical fixed along pole with and dirlling holes including required number of clamp made out of Flat iron 25mm x 6mm with nuts, bolts ,washers etc. duly painted with two coats of aluminium paint including any addition / alteration (if required) for fixing street light complete all as specified and as directed by Engineer-in-charge.

Supply only heating element of capacity 2 KW Triangular / Round shape including rubber washer(ISI Marked) , bolts , clamps etc for geysers of 25/50 Itr capacity of any type & make complete all as specified and as directed by Engineer - in - charge .Make :Racold/Bajaj/Daspass or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

Supply only thermostatic switch ( ISI marked ) 7" long of range 0 ° C to 80'C suitable for 25/50 ltr capacity geyser complete all as specified and as directed by Engineer - in - charge .Make :Racold/Bajaj/Daspass or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

Supply only thermostatic switch ( ISI marked ) 9" long of range 0 ° C to 80'C suitable for 25/50 ltr capacity geyser complete all as specified and as directed by Engineer - in - charge .Make :Racold/Bajaj/Daspass or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

Supply only thermostatic switch ( ISI marked ) 11" of range 0 ° C to 80'C suitable for 25/50 ltr capacity geyser complete all as specified and as directed by Engineer - in - charge .Make :Racold/Bajaj/Daspass or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

Supply only indicating lamp round / rectangular type as per existing suitable for 25/50 ltr capacity geysers working on 230 volt AC supply complete all as specified and as directed by Engineer - in - charge .

Supply only fusible safety brass plug as per existing suitable for 25/50 ltr capacity geysers complete all as specified and as directed by Engineer - in - charge .Make :Seimens/Jonson Control/Daspass or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F of storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) for 25 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of stainless steel storage tank.

S&F of storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) for 50 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of stainless steel storage tank complete all as specified and as directed by Engineer - in - charge .

Supply only base plate assembly 20 SWG heavy duty suitable for 25 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample). complete all as specified and as directed by Engineer - in - charge .

Supply only base plate assembly 20 SWG heavy duty suitable for 50 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample) complete all as specified and as directed by Engineer - in - charge .

S & F in replacement 600mm long PVC connection set of two suitable for hot and cold water of 15 mm bore with PTMT nuts on both sides complete all as specified and directed by Engineer - in - charge .Make :Supreme/Prince/Ashirwad or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S & F in replacement 450mm long PVC connection set of two suitable for hot and cold water of 15 mm bore with PTMT nuts on both sides complete all as specified and directed by Engineer - in - charge . .Make :Supreme/Prince/Ashirwad or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

Supply only ball bearing 6201 & 6202 for ceiling fan of size 1200/1400 mm sweep ISI marked complete all as specified and directed by Engineer-in-Charge.Make :SKF/NBC/HCH or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

Supply only ball bearing of required size for Exhaust fan/wall fan of any size ISI marked complete all as specified and directed by Engineer-in-Charge.Make :SKF/NBC/HCH or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

Supply only capacitor of 3.15 mfd capacity, 230 Volts including provision of insulation sleeves ISI marked complete all as specified and directed by Engineer-in-Charge..Make :Havells/Indtech/Epcos or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

Supply only capacitor of 2.5 mfd capacity, 230 Volts including provision of insulation sleeves ISI marked complete all as specified and directed by Engineer-in-Charge. Make :Havells/Indtech/Epcos or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after. Note :- Old unserviceable material retrieved from above mentioned all items shall be deposited in store yard of subdivision by the contractor at his own arrangement. Noting extra shall be paid on this account.If bidder fail to submit the old item than suitable recovery as per double the Market Rate of old item shall be deducted from the final bill and suitable action shall be taken against the bidder as deemed fit.

Notes :- (a) Tenderer shall submit test report of LED street light fitting from Government accredited test laboratory for LM - 79 and LM - 80 . (b) Contractor has to furnish a replacement warranty of 05 years for LED light fittings complete including lamps from the date of completion of CA. Contractor shall obtain warranty from the manufacturer of product on their letter head and submit the same to deparment alonwith his letter head. The product will be replaced free of cost in the following case :- (i) Manfacturing defects (ii) Failure due to mechanical and electrical impact. (iii) Drop in lumen (or lux at 1 m) below 90% of clamied values of lumen(or lux at 1 m) of the LED /Luminaries. (c) All LED light/luminare must meet the provision laid down in IS - 16101 , 16102 Part -I/II ,16103 Part -I , 16104 ,16105 ,16106 , 16108/2012 and 15885 Part -II / Section 13. (d) Scope of work shall include supply and fixing street light fittings on street light bracket fixed on poles, If street light fitting requires to fixed on existing street light bracket and any addition alterration required in bracket for fixing street light, In that case cost of additional / alteration is included in the unit rate of this item, which also includes needful T & P and required accessories such as 1.5 sqmm, 3 core PVC insulated stranded copper conductor cable for connection from pole box to light fitting etc complete including making connection, testing etc complete .No extra payment is admissible on this account. (e) Light fittings shall be provided with 10 KV surge protection as mentioned in description of item. If 10 KV surge protection is not provided in light fitting for which cat part is mentioned in BOQ. Contractor has to provide light fitting with 10 KV surge protection without any extra cost to department. (f) Contractor shall write CA No on street light fitting with synthetic enamel paint which should be visible from ground level. Cost of the same is included in the unit rate of this item nothing shall be extra paid on this account.

MAJOR REFREGERATION AND ELECTRICALS (BID ID -3517424)

S.K BUILDERS AND ENGINEERS (BID ID -3517054)

BANSAL BROTHERS (BID ID -3511206)

Truly Technos LLP (BID ID -3511773)

SRI SAI CONSTRUCTION COMPANY (BID ID -3511282)

godara construction company (BID ID -3517256)