SPL REPAIR TO BLDG NO T-59 AND PROVN OF GUARD ROOM, COVERED SHED WITH TILING WKS, SEWAGE LINE WKS AND TOILET BLOCK AT RMS.

Amount

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness below or above ground level

Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excl ashalar facing

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbbish off the premises.

Dismantling of plain or corrugated sheeting of any guage/thickness in roof covering/wall clading complete all as spfd and directed

Dismantling timber scantlings unframed work 40 sqcm and over in section in any position complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets complete all as specified and directed.

Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specifed and directed.

Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specifed and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

M&L surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soil.

Excavation in over area n.exc 1.5m deep and getting out in soft/loose soil.

All as per item No 11 here-in-before but exc. 1.5m depth and n.exc 3m depth.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for fdn, n.exc 10 sq m on plan and n.exc 1.5m in depth and getting out in soft/loose soil.

Returing filling in including spreating levelling, watering and well raming in llayers not exe 25cm thick

Removing excavated materials not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point in soft/loose soil.

M &L Hard core of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick broken stone, water and rammed to a true surface.

All as per item no 16 , exc 63mm but not exc 100mm.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M &L loose filling with broken bricks of guage 80 to 150mm in soakage pits,soakage wells .

M&L for filling under floor or in foundation including water and consolidation using excavated earth.

M&L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) in floor all as specified and directed.

Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundations filling and mass concrete.

M&L Formwork to sides of pillars ,posts ,struts ,columns etc rough finished surface of concrete.

M&L Formwork to sides of concrete in foundation ,footing ,bases for columns ,rafts and raft beams ,sides and soffits or foundation and plinth beams and similar work

Form work to the soffits and side of suspended slab finish even and smooth.

Formwork to sides of concrete foundations and plinth beams rough finished concrete surfaces all as specified.

Formwork to sides and soffits of beams, lintels rough finished concrete surfaces all as specified.

Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and RCC/PCC band in wall etc.

M&L 25mm th PCC 1:2:4 type B-1 using 20mm graded aggregate as in flooring, finished even and smooth without using extra cement.

M & L for PCC 1:2:4 type B-2, 50 mm thick (using 40 mm graded stone aggregate) as in sub base all as specified and directed.

M & L Cement concrete in foundations, filling and mass concrete type1:2:4, B2 (using 40 mm graded stone Aggt)

M&L for PCC 1:2:4 type C-1 (using 20mm graded stone) as in filling and mass concrete with WPC 2% by weigth of cement.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in band coping bed plate, benching etc including slightly rounded of chamfered angle, throating, etc complete all as specified and as directed.

Precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab set in cement mortar 1:4. Note: Reinforcement shall be measured and paid separately.

M&L for RCC type B1 1:2:4 (20mm graded stone aggregate) as in foundation footing,plinth beam, all as specified.

M&L for RCC type B1 1:2:4 (20mm graded stone aggregate) as in beams, lintels all as specified.

M/L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded agg in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed

M&L for 100 mm thick PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in floor.

M & L PCC 1:3:6 type C-2 s(using 40mm grade stone aggregate as in foundation etc and mass concrete.

M&L for PCC 1:3:6 type C-2(40mm grade stone aggregate) as in surface channels, foundation of man holes, septic tank and drains etc complete all as specified and directed.

Extra for forming fair finished surfaces of drain or channels, inner girth 30 cms, using extra cement including forms, moulds mitred/ stopped ends etc., complete.

Plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested of 150mm bore.

M&L for PCC 1:3:6 type C-2(40mm grade stone aggregate)as in bed to 160mm dia PVC drain pipes including packing under and haunching against the sides of pipes after they are laid and tested.

M&L for RCC (nominal mix) Type A1 1:1.5:3 using 20mm gradede stone aggreagate as in foundation includingrafts footing foundation beams plinth beams bases for columns etc basement slabs under -reamed piles all as specified and directed by Engr-in-charge.

M&L for RCC (nominal mix) Type A1 1:1.5:3 using 20 mm graded stone aggreagate in columns pillars ,piers posts and struts etc.

M&L for RCC (nominal mix) Type A1 1:1.5:3 using 20mm gradede stone aggreagate as in lintel /band supported on walls ,beams and columns in floors roofs , landing ,balconies canopies ,deck slabs and in shelves and the like

All as per item No 46 hereinbefore but in Chajja .

M&L RCC design mix Type M-20 (using 20mm graded stone aggregate) as in slabs.

M&L for precast cement concrete Type M-20 using 20 mm graded aggregate in cover slab for manholes with handle complete all as specified and directed.

M&L for anti fungal chequered cement concrete tiles 250x250x20mm thick with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar 1:6, etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed.

S&F vitrified ceramic tiles 10mm thick n.exc 0.36 Sqm each in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

S&F Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6complete all as specified and directed.

Same as per ser No 53 but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm, 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S/F 2nd class hard wood scantling as in purlins rafters ,& framed work etc clean sawn complete all as specified and directed.

M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified and directed.

M&L for brick work with sub class `B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1:4 complete all as specified and directed.

M&L Brick work with sub class B brick straight or curved on plan exc 6.00 m mean radius built in CM 1:6 complete all as specified and directed.

M & L rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete work even and smooth without using extra cement.

Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound.

All as per Serial Item No. 64 described here-in-before, but on other than fair faces.

M&L for 10mm thick plaster in CM 1:6 on other than fair face of brick work finished even and smooth without using extra cement.

M & L 10mm thick rendering on fair faces of brick wk or concrete surface in CM 1:3 with using water proofing compound 2% by wrought all as specified (WPC paid separately).

Supply only integral water proofing compound.

S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19x0.9 mm duly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size etc complete all as specified.

S & F for 35 mm thick flush shutters , solid core construction, with block board core plywood is covered with decorative face veneer with lipping/frame to match type on both sides complete all as specified and directed.

M/L 30mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M&L butt hinges medium grade cold rolled mild steel and fixed size of hinges 100 mm long size

S&F for butt hinges, medium weight, cold rolled mild steel, 75 mm size.

S/F Aluminium anodised barrel tower bolt of extruded section and fixed 200 mm long

S&F for 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed

S&F for 125 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed

S/F Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long

S&F Aluminium handle cast type anodised 150 mm long

S&F for 125 mm Aluminium handles, cast type, anodised

S&F 100mm size aluminium handles,cast type,anodised all as directed complete all as specified and directed.

S&F for 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed.

S/F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section(250 mm long)

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm.

M & L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples all as directed by Engineer- in -Charge.

S&F in repairs for Draperly rod /Harrison rails of CP of 20mm dia with fixing brackets , stops, rollers and rings etc.

M & L for TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars 5mm dia over upto 8mm as stirrups, spacers, binders etc .

M&L for rolled mild steel in roof trusses (framed), tubular trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A

S &F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment coforming to Fe 410 -W (Gde- E- 250) quality- A

S&F for framed brackets of angles or Tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting etc n.exc 10 kg each brackets, conforming Fe- 290. Gde -E-165 (brackets over 10 kg each to be measured under structural steel.

S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10 cm long

M&L for framed work as grills, gratings, guard bars and similar articals, conforming to Fe-290 (Gde-E-165) complete all as specified and directed

S&F steel ventilator with top hung shutter including hinges, peg stay complete all as specified and directed.

S&F for 15mm bore bib tape cast copper alloy , screwed down, screwed for iron pipe or for brass ferrule.

S&F for 15mm bore angle stop cock, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe.

S&F 15 mm dia fancy type stop cock, chromium pated with crutch or butterfly handle, screwed both ends for iron pipe or for unions

S & F 10 litres capacity PVC flushing cistern syphonic action type, low level white with inlet ball valve, float and handle including bracket, PVC flush pipe, 32mm dia as fixed in repairs complete all as specified and directed.

S & F vitreous China, squatting pan “long pan” Orissa pattern of size 580mmx440mm, white with ‘P’ or ‘S’ trap, back inlet and foot rests including connecting to trap and flush pipe, anti-syphonage pipe etc and provision of lime concrete bedding, as fixed in repairs, complete all as specified and as directed.

S&F for wash basins,white, vitreous china flat back ,size 550x400 mm, including cutting for and pinning in ends of brackets or erecting stand PVC waste pipe,450mm PVC connection pipeCP waste coupling complete.

S&F soap dish, CP, aprox size 160 X 160 X 90 mm.

S&F for 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screwscomplete all as specified.

S&F for vitrious china urinal, half stall type, white including flushing cistern, flush pipe and waste pipe. CP waste coupling complete.

S&F brass Choromium plated shower rose with or without swivel joints 125mm size including fixing to steel pipe or union complete.

S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, fancy type, 15 mm bore dia pipe.

S&F 125mm dia grating doom with waste hole of PTMT

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing.

S&F 15 mm dia GI tubes 'medium grade' with all fitting and fixed complte to walls or laid in floor

S&F 20 mm dia GI tubes 'medium grade' with all fitting and fixed complte to walls or laid in floor

S&F for PVC (SWR) pipes 160 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F for PVC (SWR) 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor

S&F for PVC (SWR) 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floor

S&F for PVC (SWR) 110mm dia bends in any radius.

S&F PVC (SWR) 75 mm dia bends in any radius.

S & F 75mm dia PVC (SWR) vent cowl complete all specified and as directed.

S&F for Rotational moulded polyethylene water storage tanks, 1000 ltr capacity(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part -I

S&F 1 mm thick 150mm dia mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges.

S&F 15 mm dia PVC connections size 450mm length with PTMT nuts

Cutting into existing manhole/soakwell/septic tank making good to pipe and benching cutting out existing benching for and forming branch channel (half round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for internal dia size 150mm.

Material and labour preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint in any tint over a coat of primer all asspecified and directed

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M & L for preparation of newly surfaces of walls and applying two coats of oil bound distemper (oil emulsion) over one coat of primer all as specified and as directed.

M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper (oil emulsion) over a coat of 3mm thick wall care putty filling complete all as specified and directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of cement base paint of approved shade on walls all as specified and directed by Engineer-in-Charge

M&L for preparation of new plastered walls including cornices, pilasters etc and applying Two Coats of cement base paint over a coat of alkali resistant primercomplete all as specified and as directed.

M&L for preparation of plastered new surfaces of walls and applying two coats of white wash complete all as specified and directed

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.

Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Finolex/Havells/RR Kabel/Richa Make of caping/casing :- Prestoplast/Finolex/supreme

M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connecting to earth dolly, including PVC rectangular box for mounting switches/sockets/regulators etc. with 3mm thick plastic laminated sheet cover of suitable size as required at site and 50 mm deep complete all as specified and as directed. Make: Richa/Havells/RR Kabel. Make of caping/casing & PVC boxes: Prestoplast/finolex/Supreme.

One light/fan point controlled by one, one way switch.

One light point/fan point controlled one way each addition light point on the same switch circuit

One 3 pin socket outlet 5 Amps on the same board with other switches.

One 3 pin socket outlet 5 Amps on the independent board.

All as per above item here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. Make:- Finolex/ Havells/ RR Kabel/ Richa Make of caping/ casing & PVC boxes :- Pstoplast/Finolex/supreme

M&L for Switch Piano, flush type single pole, one way 5 Amps complete all as specified and directed. Make:- Anchor/Plaza/SSK

M&L for bell push switch 5 amps piano type flush type Make : Anchor/Havells/Plazae

M&L for replacement of Bell AC 230 volts musical type. Make : Anchor/Havells/Plaza

M&L for Socket outlet 2 in 1, 3 pin, 5A flush type complete all as specified and directed. Make:- Anchor/Plaza/SSK

M&L for Switch Socket combination 2 in 1, 3 pin 5A/16A, 5 in 1 flush complete all as specified and directed. Make:- Anchor/Plaza/SSK

M&L for stepped type electronic fan regulator 100 W socket size flush type on the existing phenolic laminated sheet etc. Make : Anchor/Havells/Plaza

M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed. Make : Anchor/Havells/Plaza

M&L for 20W LED, 4', Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting incl taking down old unsv light fitting complete all as specified and as directed. Make : Havells Cat No LHFXCEP1TNNW020(batten) & LHLDDCXCML8Q020(LED Tube) or equivalent in Bajaj/Philips

M&L for LED 1x20W Security light fitting, drawn through including GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling holes as required and connecting up with flexible copper cable of suitable size from ceiling rose to the light fitting complete all as specified and directed. Make:-Endurapearl SL20WLLED757SASYTOPCMP /Bajaj/Philips/CG

M&L for 10 watt LED, 2', Wall mounted with polycarbonate housing/ batten.complete all as specified and as directed.

M&L in replacement for decorative wall mounted light fitting made up of polycarbonate including 9 watt LED lamp with B-22 base including taking down old unsv light fitting complete all as specified and as directed. Make: Havells/Bajaj/Surya

M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings incl taking down old unsv light fitting. Make oF Lamp holder:- Anchor/Plaza/SSK/Hager MakeOf Lamp :- Havells/Bajaj/Philips

S&F for globe light LED 9 Watt with bracket complete all accessories complete all as specified and as directed Make :Bajaj/Havells/Philips/CG

S&F Bed light with 9 Watt LED lamp and all accessories complete all as specified and as directed Make : Philips/ Wipro/Syska LED/ CG/ Bajaj)

Taking down Exh/Ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, painting of fans complete with superior quality synthetic enamel paint by spraying including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.

M&L for rubber bush with clamping set, comprising GI bolt, nut and split pin complete all as specified and as directed.

M&L for replacemnt of capacitor 2.5 Mfd incl making electrical connection complete all as specified and as directed. Make : Havells/Anchor/Bajaj

M&L for replacemnt of steel ball bearing/bush of suitable size compatible to the existing ceiling fan/Exhaust Fan complete all as specified and as directed.

M&L for copper rewinding for suitable size complete to the existing ceiling fan/Exhaust fan complete all as specified and as directed.

M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed. Make:- Legrand Cat No 607711 or equivalent in ABB/Siemens

M&L for MCB SPN 40 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand Cat No 408636 or equivalent in ABB/Siemens

M&L for MCB SP 5-40 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand Cat No 408587-95 or equivalent in ABB/Siemens

S&F sheet metal enclosure with socket plug top and MCBs single pole 32 Amps and neutral encloser with two pin and earth plug and socke complete one single pole MCB including metal encloser all as per specified and as directed by Engr-in-charge.

Taking down LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 10 sq mm, 2 core complete all as specified and as directed Make Richa/Havells/Polycab. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.

All as per Item No 158.00 LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 4 sq mm, 2 core complete all as specified and as directed. Make Richa/Havells/Polycab

Taking down LT UG cable/service connection of any size and M&L for laying of LT UG cable , XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. Make: Havells/Polycab/Phinolex/Richa

M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.

M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed

Supply & laying tubes ' light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. Make:- Jindal/TATA/Prakash surya

S&F for Ceiling fan 1200 mm sweep, 5 star rating including suitable size of fan hook and connecting up with three core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed. Make: Bajaj/Usha/CG

S&F for fixing Exhaust fan, Metallic, AC single phase 230/ 240 volts of size 300 mm sweep with louvre shutter including anchor bolt of suitable size for fixing arrangement and connecting up with three core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed. Make : Bajaj/Usha/CG

Supply and fix Water heater storage type, electric,capacity 25 litres.BEE 5 star rated including suitable size and length of PVC connection for hot & cold water and fixing arrangement complete. Make : Bajaj/Usha/CG

M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI frame with CI cover funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable

Feroz Alam Khan

m/s chakraborty enterprises

M/s K P Enterprises

M/S SHANTI UDYOG

VAISHNO ASSOCIATES

M/S ORIENTAL MOTORS COMPANY