Annual periodical maint of B/R and E/M nature Offr colony in Old Cantt Prayagraj.

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed

M&L for prepainted coloured galvaniume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile stregnth of 550 mpa as in roof covering and cladding to wall fixed with self tapping screws complete all as specified and directed.

M&L for prepainted coloured galvaniume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to roof wall, fixed with self tapping screws complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section (framed work), in any position complete all as specified and directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section (framed work), in any position complete all as specified and directed.

M&L for timber scantling framed work second class hard-wood clean sawn scantling complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for structural steel work using rolled mild steel of grade Fe 410-W(Gde-E- 250)quality-A as in roof trusses (framed and trussed), purlins, crane gantries, rails and fastenings, heavy bracket framing (made from beam, tee, angle, channel or flat sections), including distance pieces, cleats, gusset plates etc., cut to required lengths, hoisted, fixed in position, including welding, bolting or riveting as required complete all as specified and directed.

S&F mild steel screw bolts diameter of neck in 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but not exceeding 10 cm long complete all as specified and directed.

Taking down Chowkats or frames, area of opening n'exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down Chowkats or frames, area of opening exc 1.5 Sqm but n'exc 4.0 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

M&l for providing and fixing factory made UPVC Sliding window (Three track white colour), area n'exc 2.0Sqm each, made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm) including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2+ -0.2mm thick, Touch Lock of zinc alloyed (white powder coated), roller system, wire cloth and/or plain glass in penal of shutters, fixed to the wall with 8mm x 100mm long fasteners complete all as specified and directed. Note: Window profile shall be hollow section with multi chamber. All sections shall be miterd cut and fusion welded at all corners. Size of profiles/ sections shall be as under :- (i) Frame - 88mm x 52mm duly inserted galvanised steel section having size 30mm x 18mm -2 nos, (ii) Sliding sash - 42mm x 67mm duly inserted galvanised steel section having size 30mm x 18mm (iii) Sliding mesh Sash - 42mm x 57mm , duly inserted galvanised steel section having size 26mm x 10mm (iv) Sliding interlock (One vertical length in each shutters-45.5mm x 28mm), (v) Glazing bead - 24.5mm x 16mm . (vi) The unit rate quoted by contractor excludes cost of glass and wire cloth but includes all other connected accessories. Net Opening will be measured for payment purpose.

M&L for providing and fixing factory made uPVC white colour fixed window (Area exceeding 1.00 sqm but not exceeding 2.00 sqm each), made of extruded profiles with wall thickness of 2.3mm(+-0.2mm) including drilling of holes for fixing hardware and drainage of water etc., m making arrangement for fixing of hardware, EPDM gasket, 1.2+ -0.2mm thick, Touch Lock of zinc alloyed (white powder coated), roller system, wire cloth and/or plain glass in penal of shutters, fixed to the wall with 8mm x 100mm long fasteners complete all as specified and directed. Note: Window profile shall be hollow section with multi chamber. All sections shall be miterd cut and fusion welded at all corners. Size of profiles/ sections shall be as under :- (i) Frame - 88mm x 52mm duly inserted galvanised steel section having size 30mm x 18mm -2 nos, (ii) Sliding sash - 42mm x 67mm duly inserted galvanised steel section having size 30mm x 18mm (iii) Sliding mesh Sash - 42mm x 57mm , duly inserted galvanised steel section having size 26mm x 10mm (iv) Sliding interlock (One vertical length in each shutters-45.5mm x 28mm), (v) Glazing bead - 24.5mm x 16mm . (i) Frame - 60mm x 58mm duly inserted galvanised steel section having size 28mm x 21.5mm. (ii) 'T' profile/section (One vertical length in between two shutters-60mm x 74mm duly inserted galvanised steel section having size 27mm x 17 mrn. (iii) Glazing bead -35mm x 20mm (iv) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.

M&L for providing and applying approved quality weatherproof silicone sealant around the perimeter of uPVC window frames (internal and external sides) to seal the gap between frame and masonry/plaster surface, masking, and cleaning, complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work, con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F 5.5 mm thick plain sheet glass as in,shutters with and including rubber gasket and natural colour anodized aluminium snap beading/glazing, clips etc complete all as specified and directed.

S&F stainless steel wire mesh, 0.56mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.

Taking down drapery rod including bracket and cap, any discription and pattern complete all as specified and directed.

S&F 25 mm dia stainless steel drapery rod cut to size and fixed in position including brackets, cap both ends fixed to wall complete all as directed. Note : Drapery rod for each door/window/ventilator/opening shall contain one pair breacket and one cap on ceach side. Brakets and caps shall be strictly as per sample kept in GE's office.

S&F factory made single extruded WPC (Wood Polymer Composite) solid Frames/ Chowkhat for door/ window/ Ceosetory windows etc of size 100 x 50 mm, fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. NOTE : (i) The WPC shall comprising of virgin PVC polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms). (ii) The frame shall fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws. (iii) The WPC shall have minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant. (iv) The cost of M.S. hold fast/ lugs or SS dash fasteners shall deemed included in quoted unit rate. Each frame shall be fixed with min 06x holdfasts/ faster's.

All as per item No. 21 above but Frames/ Chowkhat of size 125 x 65 mm.

All as per item No. 21 above but Frames/ Chowkhat of size 45 x 70 mm

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick and fixed with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws compete all as specified and directed Note : (i) WPC shall comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. (ii) WPCshall be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter. (iii) stainless steel butt hinges and necessary S.S screws shall be paid separately

All as per Item No. 24 but solid plain flush shutter.

S&F 30mm thick plain WPC factory made glazed Skeleton door shutters (conforming as per IS-4020) having density not less than 600 Kg/cum, water prrof, termite proof, fire retardant and screw holding capacity. Door should be fixed with SS hinges and SS screws and panelled with Stainless steel mosquito mesh and XTN aluminium mesh for additional strength and safety purposeComplete all as specified and directed. Note- Stainless steel wire mesh and SS hinges shall be measured and paid separately.

S&F 150mm long SS handles, complete all as specified and directed.

S&F 200mm long SS barrel tower bolts complete all as specified and directed.

S&F 250 mm long SS sliding door bolt with hasp, staple (bolt type) and fixing clips complete all as specified and directed.

S&F 100 mm long SS butt hinges, complete all as specified and directed

S&F 300 mm long, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed

Taking down Shutter of area exc 1.0 Sqm but n'exc 2.00 Sqm each complete all as specified and directed.

Taking down Shutter exceeding 2.0 Sqm each complete all as specified and directed.

S&F 150 mm Hasp and staple, stainless steel, wire type, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F stainless steel 150mm dia oval shape handle fancy type brass polished bright finish complete all as specified and directed.

S&F 50mm magnetic catches for cabinets with striking plate & magnetic stud as per sample kept in GE's offce and as approved complete all as specified and directed.

S&F 30mm wide stainless steel continuous (piano) hinges complete all as specified and directed.

M&L for 40 mm dia CP brass cuboard knobs fixed with nuts ,screws and washers, bright polished complete all as specified and directed.

M&L for providing and fixing 18mm thick factory made single extruded WPC (Wood Polymer Composite) solid board shutters for cup boards, work stations and bathroom/kitchen cabinet etc, one side white color and other side laminted fixed with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note : (i) WPC shall comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. (ii) WPCshall be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter. (iii) stainless steel butt hinges and necessary S.S screws shall be paid separately

M&L for providing and fixing 12 mm thick factory made single extruded WPC (Wood Polymer composite) solid plain both side white color board for backing of cup boards and bathroom/kitchen cabinets etc. with stainless steel screws etc. complete all as specified and directed Note : WPC shall comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound finishing the surface even and smooth without using extra cement complete all as specified and directed. Note: (i) Water proofing compound shall be mixed @ 200ml per 50Kg cement (min) or as per manufecturer's specification. WPC shall be measured & paid seprately under respective item here-in-under as 'SUPPLY ONLY'. (ii) The unit rates quoted shall be applicable for exicution of work up to 10m height and deemed included cost of all T&P ,scafolding and all safety precaution (i.e. Safety Jacket, Safety Shoes, Safety Masks, Safety Helmet, Safety harness, Safety Goggles etc) required for smooth exicution of work. Without safety precaution this work will not be allow to commence.

M&L for rendering 15 mm thick on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:4, finishing the surface even and smooth without using extra cement complete all as specified and directed. Note: The unit rates quoted shall be applicable for exicution of work up to 10m height and deemed included cost of all T&P ,scafolding and all safety precaution (i.e. Safety Jacket, Safety Shoes, Safety Masks, Safety Helmet, Safety harness, Safety Goggles etc) required for smooth exicution of work. Without safety precaution this work will not be allow to commence.

Supply only liquid integral crystalline water proofing compound complete all as specified and directed.

M&L for rendering 5 mm thick on ceiling surfaces in cement mortar 1:3 finisheing the surface even & fair complete all as specified and directed.

M&L for complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit), make surface clean, free from dust, loose paint etc complete all as specified and directed.

M&L for two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon addictive & color stay technology excellent dirt pick up resistance with low VOC less than 50 gram/ltr as per the LEEDS specification anti algal propertiess in two coats @ 1.79 ltrs (undiluted)/10sq mtrs diluted with water as per manufacturer instruction applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 m. the spray machine should be of reputed paint manufacturer as mentioned in PS and accessories for applying emulsion should be able to spray in hard to reach areas and penetration of emulsion on the surface using auto roller for making the surface uniform complete all as specified and directed. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Make of Manufacturer : ASIAN/BERGER/NEROLAC or equivalent make as mentioned in Appx 'D' Note- The contractor shall obtain approval of the agency from GE and shall enter a memorandum of understanding (MOU) with the manufacturer duly approved by GE. The execution of work shall be commenced after the submission of MOU and necessary approval from the Engineer-in-charge. MOU shall be valid during currency of work. However during defectlibality period, if any defect is noticed, the contractor shall only be responsible for the rectification of same.

M&L for 1mm thick wall care putty with one coat of acrylic water based exterior grade primer @0.9 ltrs (undiluted)/10sq mtrs diluted with water 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed. Make of Manufacturer : ASIAN/ BERGER/ NEROLAC or equivalent make as mentioned in Appx 'D'

M&L for preparation of old treated surface of wall by scrapping with wire brush/sanding paper/ metal patti, removing nails etc, and make surface clean, free from dust, loose paint etc, filling drpessions, with wall care putty, to receive decorative coat/painting coat complete all as specified and directed

M&L for applying two coats of oil bound distemper on prepared wall surface complete all as specified and directed.

M&L for applying three coats of white wash on prepared ceiling surfaces, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paints on old steel/wooden surfaces of any description over 10 cm width or girth including preparation of surface complete all as specified and directed.

Dismantling water tanks exc 250 ltr but n'exc 500 Ltrs capicity, any type and discription including removing from site complete all as specified and directed.

Dismantling water tanks exc 500 ltr but n'exc 1000 Ltrs capicity, any type and discription including removing from site complete all as specified and directed.

S&F 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

All as per Item No.56 ss above but 1000 ltr capacity tank.

M&L for Brick work with fly ash (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and directd.

M&L for demolition and taking down of existing leaking roof treatment including removal of debris, cleaning and preparation of surface and PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate laid as roof padding over chajja or otherwise finished fair and even, mixed with approved integral crystalline waterproofing admixture, on inaccessible roofs or chajjas in buildings up to 12m height from ground level, including necessary scaffolding and safety arrangements, complete all as specified and directed by Engineer-in-Charge.

M&L for arresting active leakage/seepage in concrete or masonry surfaces by cutting open and enlarging visible cracks/voids as required, cleaning the substrate thoroughly, and applying approved instant leak plugging compound (such as Dr. Fixit Fast Plug, Sika Plug, or equivalent) in slurry or paste form as per manufacturer’s specifications to immediately stop water ingress; including all surface preparation, tools, mixing water, application by hand or trowel, and curing if required, complete all as specified and directed by Engineer-in-Charge.

Demolition of existing reinforced cement concrete (RCC) overhead water storage tanks of capacity up to 1000 liters located in buildings up to G+3/4 storeys, including tanks situated on inaccessible roofs, breaking of RCC walls, slabs, bottom and dismantling of reinforcement removing debris, sludge and unserviceable materials to a lead of 500m and cleaning the site complete all as specified and directed by Engineer-in-Charge.

Taking down fittings such as switches, ceiling roses, regulators, sockets,combination lamp holders/ retrofit lamp, electric bell etc. complete all as specified and directed.

S&F switch piano, flush butten, single pole one way 5 Amps 240 Volt complete all as specified and directed.

S&F switch piano, flush butten, single pole two way 5 Amps 240 Volt complete all as specified and directed.

S&F bell switch, piano type single pole one way 5 Amp complete all as specified and directed

S&F socket 5 amps 5 pin, socket outlet, flush type , 230 volts complete all as specified and directed

S&F switch piano fiush button single pole one way 15 Amp 240 volt complete all as specified and directed.

S&F socket 15 amps 6 pin flush type , 230 volts complete all as specified and directed

S&F switch socket combination 2 in 1, multipurpose, 15/16 amps 6 pin flush type , 230 volts complete all as specified and directed

S&F lamp holder insulated body PVC/ Polycabonate type with back plate suitable for batten/ angular/pendent holder fittings including 9 Watt LED lamp/bulb complete all as specified and directed

S&F for modular switch 1 way 6 Amp complete all as specified and directed.

S&F for modular switch 2 way 6 Amp complete all as specified and directed.

S&F for modular switch 1 way 16 Amp complete all as specified and directed.

S&F for modular switch bell push 6 Amp complete all as specified and directed.

S&F for modular socket universal 6/16Amp combined 2 Module with ISI marked complete all as specified and directed.

S&F for modular socket universal 6A-2/3 pin type ISI Marked complete all as specified and directed.

S&F LED retrofit lamp of capacity 12 watt, B-22 holder base with polycabonate body and aluminium heat sink warm white complete including taking down old/ unserveciable CFL/bulb complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F electric bell ding dong type AC 230 Volts, 50 Hz single pole complete all as specified and directed.

S&F fan regulator, modular type, 120 watt single phase complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way 415 Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F miniature circuit breaker (MCB) SPN 40Amp, 240V, 10KA 'C' curve, with connections complete all as specified and directed.

S&F miniature circuit breaker (MCB) Single Pole, 6 to 32 Amps 240 volts, 10KA 'C' Curve complete all as specified and directed.

S&F miniature circuit breaker (MCB) TPN, 63 Amps 415 volts, 10KA, 'C' Curve complete all as specified and directed.

Taking down light fittings with all fixtures, any discription, type, capicity and in any location including disconnection of electric connections complete all as specified and directed.

S&F LED Mirror light fitting with lamp,1 x 10Watt, 2 feet long, 6000K, Decorative Indirect up-down light for mirror and as wall light application,made of extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection from ceiling rose to connector with and including three core flexible copper cable of size 23/0.0076 of required length complete all as specified and directed.

S&F LED tube light fittings,18/20 watt fixed on wall with rawl/plug , including making connection from connector to ceiling rose with and including 23/0 0076 flexible copper wire three core of required length complete all as specified and directed.

S&F Decorative wall light fitting/fixture suitable for 15W TU retrofit LED bulb (B-22 base) polycarbonate body, weather proof, environmental friendly, energy efficient with LED lamp and all accessories, prewired including complete making connection from ceiling rose to connector with and including three core flexible copper cable of size 23/0.0076 of required length complete all as specified and directed. Make: Havells Cat No CITY 3, LHDL06160099 or equivalent of Philips / Crompton.

S&F road lighting luminaire with LED lamp and all accessories, 35 Watt, unique peanut optics to ensure uniform distribution, higher spacing between poles, maintenance free system for city roads and Streets, 50% Energy Savings, IP66 Protection PC and FG Cover, High Impact Resistance fixed on pole/wall with bracket, connecting to existing junction box with and including three core flexible copper wire of size 23/0.0076 complete all as specified and directed.

S&F in repair bracket for fixing light fitting on pole, made out of 25mm bore GI pipe (light grade), 1.20 m long made to shape and fixed to existing pole or bldg by means of 2 Nos mild steel flat iron clamps (40x6mm size) with suitable size bolt, nuts & washers complete all as specified and directed.

Taking down existing sub main wiring with acessaries and fixtures complete, any discrption, type, capicity and location including disconnection of all electric connection complete all as specified and directed.

S&F sub main wiring with two single core FRLS PVC insulated unsheathed multistranded copper conductor of size 6 Sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area FR PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 20mm dia 'medium grade' PVC concealed conduits and fittings, complete all as specified and directed. NOTE: One unit length shall measured as two run of main wire and one run of conduit & earth wire

Taking down existing Ceiling fan/Exhaust fans with frame and mosquito mesh net including disconnecting all electrical connection, dismantling blades and depositing to store complete all as specified and directed. (NOTE: Existing fans shall be deposited by the contractor in AGE E/M store Yard at Old Cantt Prayagraj.)

S&F of new exhaust fan, matel body, heavy duty, 300 mm sweep ,single phase 240 volt including making electrical connection from connector to ceiling rose with and including 3 core 23/0.0076 size flaxible copper cable, marking MES No. wirh paint complete all as specified and directed.

S&F of new plastic body exhaust fan 250 mm sweep, single phase 240 volt, including making electrical connection from connector to ceiling rose with and including 3 core 23/0.0076 size flaxible copper cable, marking MES No. wirh paint complete all as specified and directed

S&F two pin and earth plug and socket with 1 MCB single pole 20 to 32amps 'C' series 10KA in sheet metal enclosure and connections complete all as specified and directed.

S&F ceiling fan with Brush Less Direct Current (BLDC) Motor,ingle phase AC,230 V, 50 Hz, 1200 mm sweep, BEE 5 star rated, class of insulation: B, copper winding, with remote or electronic regulator unit for speed control, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope and all remaining accessories like safety pin, nut bolts, washers etc, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, complete all as specified and directed.

Taking down Power cable of any discription, type and capicity from any location complete all as specified and directed.

M&L for Supply,laying, jointing & testing of 16 Sqmm, 4.0 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor complete all as specified & directed. Note: Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out soft loose soil complete all as specified and directed.

Returning filling in soft / loose soil including spreading leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated material (soil), n'exc 50m and depositing where directed at a level n' exc 1.5 m above the starting point complete all as specified and directed.

M&L for sand cushioning to underground cable, provided in two layers i.e. 8cm before laying cable and 15cm after laying the cable complete all as specified and directed. Note: Punned thickness of sand shall be measured for payment perpose.

M&L for supply and laying old size sub class ‘B’ bricks, laid flat with width equal to length of brick (perpendicilar to cable) as cable cover complete all as specified and directed.

S& PVC sheathed white colour three core copper flexible cable of size 23/.0076 , fixed in repair complete all as specified and directed.

S&F Heating element threaded/ screwed/ triangular or cup style type 2000 Watt ISI marked , fixed in repair, complete all as specified and directed.

S&F Thermostat suitable for 25 or 50 litre capacity of geyser, range 20 to 80 degree ISI marked, fixed in repair, complete all as specified and directed.

S&F PVC connection cotton braided heavy duty with brass union/ coupling of length 450 mm with rubber washer suitable for 15 mm dia pipe for hot or cold water connection, fixed in repair, complete all as specified and directed.

S&F Condenser of 2.5 MFD, 440 Volt AC, conforming to IS-1709 suitable for fans, fixed in repair, complete all as specified and directed.

Raj Contruction (BID ID -3468925)