Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹1.7 L+₹6,107 (3.78%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹1.8 L+₹17,107 (10.6%)Admitted-Finance 91 ENGINEERS ENCLAVE 1ST FLOOR PITAMPURA DELHI 110085 | DELHI | NORTH WEST DELHI | DELHI | 110085 | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Mayur Enterprises L1 | B R CONSTRUCTION CO L2 | Sri Sai Enterprises L3 |
|---|---|---|---|---|---|---|
| 1.00 | Petrol Operated Chain Saw
Engine : SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY
Displacement: 45.4CC
POWER OUTPUT : 2.3Kw. 3.0 HP
Max.engine speed (with guide bar & chain ): At least 12500 RPM
Carburetor: Diaphragm type & compensator technology.
Fuel tank capacity: Should be minimum 450 ml.
Dry weight( without cutting attachment ): Should not be more than 5.0 KG
Clutch: Clutch shoe LININING metal ONLY.
Guide Bar Design: Should be Rollomatic type.
Guide Bar Length: Guide bar length must have 50 cm/20" inch.
Guide bar and Chain: Should have same manufacture only.
Chain Type: Every drive link require groove & small oil receiver hole for better Lubrication. 0.325 inch Pitch & 1.6 mm thickness only.
chain Lubrication System: Fully automatic ,speed controlled rotary oil pump
Chain oil tank capacity: Should be minimum 200 ml.
Oil Pump Drive: Should have direct drive from Crankshaft & Oil Pump flow adjustable.
Master Lever Control: Must have all operation in One Hand, Chock,throttle, Acceleration,switch off.
Guaranteed Sound power level: Should not be more than115 Db(A)
Maximum chain velocity to ISO 11681: Should be minimum 28 m/s
Certification: Product should have valid DPLF certificate with test standard EN ISO 11681. | 1 | Each | 43,679 ₹43,679 | 38,500 ₹38,500 Lowest | 41,500 ₹41,500 |
| 2.00 | Brush Cutter
Engine: SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY
ENGINE DISPLACEMENT: 40.2CC
Power Output: 2Kw/2.7HP
Max Output shaft speed at cutting attachment: Should be minimum 9000 RPM
CARBURETOR: Diaphragm with compensator technology.
Fuel Tank Capacity: Minimum 600 ml.
WEIGHT( Dry,without cutting attachment & deflector): Should not be more than 7.5 Kg
CLUTCH: Centrifugal Type, Clutch Shoe Support base & lining Metal Only.
MULTI FUNCTION HANDLE: Should have Acceleration ,ON/off Switch at right handle.
BRUSHCUTTER HARNESS: Should be double shoulder harness only.
ANTI VIBRATION SYSTEM: Must have 4- point aniti vibration system.
Vibration Level in m/s2 at right handle : Should not be more than 2.5 m/s2
Sound Pressure Level Db(A): Should not be more than 105 dB(A)
Drive shaft design: Must have drive shaft ends square design type only.
Certification : Must have valid EN Certificaton | 2 | Each | 86,958 ₹86,958 | 85,400 ₹85,400 Lowest | 89,000 ₹89,000 |
| 3.00 | Tree Prunner
Supply of Telescopic Pole Pruner:-
Specification:-
Pole length incuding blade: 6.5m max
Blade Material: Hardened & Tempered high carbon steel .The head of the blade shall have a hooked tip useful for cutting twigs Saw
Blade Shape: Hooked type curved saw blade Type & no of cutting teeth :Tripple grounded 86 teeth
Blade Length : 15"-16"
Pole type: Light weight telescopic tubular aluminium alloy extendable pole
No of positions for pole Height Adjustment : 10 positions
Locking Mechanism : Ergonomicvally designed two way locking mechanism
Total Working length : Max 21'9"(6623 mm), MIn 10'3" (3103mm) Branch cutting capacity: 200mm max | 4 | Each | 30,756 ₹30,756 Lowest | 43,600 ₹43,600 | 48,000 ₹48,000 |
Tender Value
₹2 L
EMD Value
₹4,000
Closing Date
25 Sept 2026, 11:00 amClosed
DDH/EZ
OFFICE OF DY. DIRECTOR HORTICULTURE 419, UDYOG SADAN, PATPARGANJ INDUSTRIAL AREA, PATPARGANJ, NEW DELHI, DELHI 110092
SUPPLY OF HORTICULTURE MACHINERY EQUIPMENTS FOR MAINTENANCE OF USE IN DIFFERENT PARKS OF WARD NO. 204, PREET VIHAR, EAST ZONE, MCD.
2026_MCD_290956_1
DDH/EZ/MCD/2026-27/D-105/ NIT No.4
Open Tender
Miscellaneous Goods
Item Rate
30 days
WARD NO. 204, PREET VIHAR
PLS REFER ATTACHED DOC
2 documents required · 2 mandatory
₹590
₹4,000
9 Oct 2026
16 Sept 2026
25 Sept 2026
16 Sept 2026
25 Sept 2026
16 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Petrol Operated Chain Saw
Engine : SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY
Displacement: 45.4CC
POWER OUTPUT : 2.3Kw. 3.0 HP
Max.engine speed (with guide bar & chain ): At least 12500 RPM
Carburetor: Diaphragm type & compensator technology.
Fuel tank capacity: Should be minimum 450 ml.
Dry weight( without cutting attachment ): Should not be more than 5.0 KG
Clutch: Clutch shoe LININING metal ONLY.
Guide Bar Design: Should be Rollomatic type.
Guide Bar Length: Guide bar length must have 50 cm/20" inch.
Guide bar and Chain: Should have same manufacture only.
Chain Type: Every drive link require groove & small oil receiver hole for better Lubrication. 0.325 inch Pitch & 1.6 mm thickness only.
chain Lubrication System: Fully automatic ,speed controlled rotary oil pump
Chain oil tank capacity: Should be minimum 200 ml.
Oil Pump Drive: Should have direct drive from Crankshaft & Oil Pump flow adjustable.
Master Lever Control: Must have all operation in One Hand, Chock,throttle, Acceleration,switch off.
Guaranteed Sound power level: Should not be more than115 Db(A)
Maximum chain velocity to ISO 11681: Should be minimum 28 m/s
Certification: Product should have valid DPLF certificate with test standard EN ISO 11681. | 1 | Each | - | - |
| 2 | Brush Cutter
Engine: SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY
ENGINE DISPLACEMENT: 40.2CC
Power Output: 2Kw/2.7HP
Max Output shaft speed at cutting attachment: Should be minimum 9000 RPM
CARBURETOR: Diaphragm with compensator technology.
Fuel Tank Capacity: Minimum 600 ml.
WEIGHT( Dry,without cutting attachment & deflector): Should not be more than 7.5 Kg
CLUTCH: Centrifugal Type, Clutch Shoe Support base & lining Metal Only.
MULTI FUNCTION HANDLE: Should have Acceleration ,ON/off Switch at right handle.
BRUSHCUTTER HARNESS: Should be double shoulder harness only.
ANTI VIBRATION SYSTEM: Must have 4- point aniti vibration system.
Vibration Level in m/s2 at right handle : Should not be more than 2.5 m/s2
Sound Pressure Level Db(A): Should not be more than 105 dB(A)
Drive shaft design: Must have drive shaft ends square design type only.
Certification : Must have valid EN Certificaton | 2 | Each | - | - |
| 3 | Tree Prunner
Supply of Telescopic Pole Pruner:-
Specification:-
Pole length incuding blade: 6.5m max
Blade Material: Hardened & Tempered high carbon steel .The head of the blade shall have a hooked tip useful for cutting twigs Saw
Blade Shape: Hooked type curved saw blade Type & no of cutting teeth :Tripple grounded 86 teeth
Blade Length : 15"-16"
Pole type: Light weight telescopic tubular aluminium alloy extendable pole
No of positions for pole Height Adjustment : 10 positions
Locking Mechanism : Ergonomicvally designed two way locking mechanism
Total Working length : Max 21'9"(6623 mm), MIn 10'3" (3103mm) Branch cutting capacity: 200mm max | 4 | Each | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.83 MB
NIT4.pdf
Other Document • 0.81 MB
BOQ_339350.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .