PERIODICAL SERVICES TO CERTAIN BLDG, CERTAIN B/R REPAIRS TO JOINERY, CEILING AND CERTAIN OTHER B/R REPAIRS BLDG, REPAIRS TO LEAKAGE, SEEPAGE, WATER PROOFING TREATMENT, ROOF SHEETING OF CERTAIN BLDG AT VIJAY BAUGH AREA UNDER GE HADDO, PORT BLAIR

Amount

Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

All as per item No 04 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified.

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

All as per item No 06 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified.

M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified.

M&L 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including Rounding, grinding and mirror polishing complete. (Note : Colour of granite shall be as approved by Engr-In-Charge)

Dismantling of ceiling boarding including grid of any description fixed in any position with nails complete all as specified and as directed.

S&F for anodoised aluminium powder coated snap grid frame work for ceiling 605mm x 605mm using aluminium anodised sections aluminium sections main tee 36.5X25X1.4mm, cross 23.5X26.4X1.4mm, angle 25X25x1.4mm including cutting, drilling jointing etc complete including 4mm dia of GI hangers wire suspenders fixed with adjustable connectors and providing 6mm thick E-boards (Classic) 605mm x 605mm size Specified by Engr-in-charge and making good etc complete all as specified and as directed.

Taking down chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters without taking off shutters from frame n.exc 1.5 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1.0 sqm but n.exc 2.0 sqm each complete all as specified and as directed.

S&F IInd class hardwood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.

S&F flush shutter 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick wooden lipping around the edges of shutter complete all as specified and directed.

S&F 35mm thick, IInd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauze, etc. ( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in as Part I Sec 8 Cl 8.24 (a) supplied and fixed to chowkats all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification all as directed

S & F for Factory made solid PVC moulded door shutter 28 to 30 mm thick with 2, 4 & 6 raised panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing all as directed.

S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 complete all as specified and as directed.

S&F extruded aluminum alloy handle fabricated type anodized 150mm long. complete all as specified and as directed.

S&F Aluminum anodized barrel bolt of extruded section 150mm long complete all as specified and as directed.

S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and as directed.

M&L for HDF boards (fire & water proof) of 19mm thick as in CB, cabinet, shelves etc & the like with and including 02 coats of synthetic enamel spray painting glossy finish over a coat of primer incl preparation of surface complete all as specified and as directed.

S&F auto hinges stainless steel grade AISI-316 (type Austenitic anticorrosive in nature) suitable for kitchen cabinets,CB , Shelves etc complete all as specified and as directed.

S&F contineous (Piano) hinges mild steel bright finish or electrogalvanised, width of flaps 40 mm (when open) complete all as specified and as directed.

S&F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

S&F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of sliding doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene asket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, auminium snap beading for glazing/ paneling, C.P. brass/ tainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge

Supply only plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane complete all as specified and as directed.

Supply only plain sheet glass 4.8 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum Door shutter exc 0.5 Sqm in each pane complete all as specified and as directed.

Supply only figured glass, pin head type glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F Prelaminated particle board 12 mm thick, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed

Supply only Aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed.

Supply and fix aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed.

S&F Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

S&F in repairs aluminum (extruded section) body, door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to1000 mm width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

Dismantling of cast iron/PVC pipe any dia and any shape incl bends/branch pieces jointed in cement mortar and taking out of trenches if reqd complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified.

S&F for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified.

S&F for 110mm dia PVC (SWR) branch piece single (Single T ) equal or unequal complete all as specified.

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified.

S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 75 mm dia PVC (SWR) grade bends of any radius complete all as specified and as directed.

S&F for 75 mm dia PVC (SWR) grade bends with acess door of any radius complete all as specified and as directed.

S&F for 75 mm PVC (SWR) branch piece, single (SingleT ) of radius equal or unequal complete all as specified.

S&F for 75 mm PVC (SWR) branch piece, single (Single Y) of radius equal or unequal complete all as specified .

S&F for 75 mm PVC (SWR) vent cowl complete all as specified.

M&L for 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified.

S&F in repairs vitreous china ware wash hand basin white flat back of size 550x 400 mm with pedestal including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete all as specified and as directed.

S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts(Make :Prayag Cat No. PIS-50H) or eqvt Model in PARRYWARE / JAQUAR.

S&F in repairs for bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm dia(Make :Prayag Cat No. PIS-08H) or eqvt in JAQUAR/ PARRYWARE.

S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup (Make : Prayag Cart Part No PIS-12 H) or eqvt in JAQUAR/ PARRYWARE.

S&F in repairs angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup (Make :Prayag Cat No. PIS-10 H) or eqvt in JAQUAR/ PARRYWARE.

S&F in repairs vitreous china ware wash down white water closet pan (pedestal pattern with trap incl connecting to drain and flushing pipe, antisyphonage pipe incl PVC sheet cover etc complete all as specified.

S&F vitreous china water closet Orissa pattern of size 580 X440mm white, with integral foot rests including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified

S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets complete all as specified.

S&F in repairs Brass chromium plated tubular towel rail 20mm dia & 60 cm long between flange. (Make Prayag Cat Part No. BA-70) or eqvt in JAQUAR/ PARRYWARE.

S&F in repairs Hand shower (health faucet) with 8mm dia & 1.0mtr long flexible tube with wall hook. (Make PrayagCat Part No. BEA-41) or eqvt in JAQUAR/ PARRYWARE.

S&F in repairs PVC connection 15 mm dia and 600 mm long with PTMT nuts complete all as specified.

S&F in repairs 1mm thick Stainless steel sinks with drainage board in kitchen with waste coupling, plugs, washers and waste pipe fixed on granite platform, over all size 915 X460mm bowl size 410mm X 330mm X 160mm complete all as specified.

Labour for drilling holes with drill machine with electric driven for gas pipe etc not exc 25 mm dia Upto 10cm depth in marble stone etc

S&F in repairs for plate rack of stainless steel using 0.65 mm thick sheet , size not less than 900 x 750 x 250 mm with steel sleevs & hanging arrengement for utensile, complete all as specified and directed (Make : Prayag Cat No. P-348)

S&F in repairs concealed stop Cock with wall flange incl all fittings complete all as specified and as directed. Make : Prayag cat No-7318 or eqvt in PARRYWARE/ JAQUAR.

S&F in repairs CP overhead shower dia 125 mm overhead shower round with revolving joints (with body rotation) & 225mm long arm shower and all fittings Make - Prayag BS-76.

Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F 20 mm dia bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

S&F 25 mm dia bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

S&F in repairs for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed.

Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by engineer- in- charge.

S&F rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed by Engineer- in - charge.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed by Engineer- in - charge.

Dismantling plain or corrugated steel sheeting any gauge, thickness including similar pattern roof coverings complete all as specified and as directed.

S&F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws as specified.

S&F for pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering, ridge, eves gutters etc fixed with self tapping screws as specified.

Dismantling structural steel work complete all as specified.

M&L for rolled section as in main and cross beam, hip and jack rafter,purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of grade Fe-410 (grde E-165) complete all as specified and as directed.

M&L for aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering and including dismantling of old wind tie complete all as specified and as directed.

M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S & F stainless steel tubing of any diameter of circular, square or rectangular in shape of grade AISI-316 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location incl taking down old railing of any description complete all as specified and as directed.

Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified.

M&L for rendering 15mm thick in CM 1:4 including mixing water proofing compound on concrete/block masonry surfaces and finished even and smooth without using extra cement all as specified.

M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coat of oil bound distemper over one coat of primer including leveling the surface where undulation found with cement putty etc complete all as specified and directed.

M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard).

M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard).

S&F in repairs anodized aluminium curtain rod decorative type powder coated 20mm dia fixed including brackets complete all as specified and directed.

M&L in repairs Aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwitched by 2.5mm polyethylene core with PVDF coating of 30.0 micron fixed over frame of aluminium tubular section 25x50mm.20.0mm thick, dully fixed to wall/ceiling with expansion fastner, having panels not exc 1200x1200mm with necessary silicon filling, in approved pattern as in column, beam, wall etc. compete as specified and as directedNote: Necessary MS scaffolding required for work shall be deemed to be included in the quoted rate.

M&L for preparation of old surfaces and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50gm per litre and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) including filling of cracks, holes and leveling the surface which undulation found with cement, putty etc. complete all as specified and as directed by Engr-in-Charge.

M&L for preparing old plastered surfaces of walls and applying one coat of oil bound distemper including filling of cracks, holes and including leveling the surface where undulation found with cement where putty etc. Complete all as specified.

M & L for preparation of old wooden surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified.

M & L for preparation of old steel surfaces of any description exc 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified.

S&F plain aluminium flat section not less than 0.68 Kg per Rm as in wind tie and for vertical and horizontal support fixed with aluminium self tapping screws etc complete all as specified.

Sree Tirumala Enterprises (BID ID -3115909)

A PALANI (BID ID -3115866)

M/s K Moorthi (BID ID -3112949)

CARTWHEEL CONSTRUCTION (BID ID -3114212)

Bismi Builders & Enterprises (BID ID -3114715)

CHANDER SEKER ENTERPRISE (BID ID -3114626)

P Babu (BID ID -3115510)