PROVN OF EXTN SHED OPEN HANGER AT R AND D IN 27 ED PALAM UNDER GE P AF GURGAON

Amount

M&L for providing 100mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge.

Demolition of brick work masonry, built in cement mortar of any description complete all as specified and as directed by Engr-in-charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6.0 mtr radius built in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge.

M&L for 15mm thick plastering in CM (1:4) by using manufacture/washed plaster grey/yellow sand and mixed with water proofing compound, finished even and smooth finish without using extra cement on fair faces complete all as specified and as directed by Engr in Charge.

Dismantling of wall/ floor tile including backing coat any description or any thickness led beded and pointed in any cement motar and removal to out of MD land complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick plastering in CM (1:4) by using manufacture/washed plaster grey/yellow sand and mixed with water proofing compound, finished even and smooth finish without using extra cement on other than fair faces complete all as specified and as directed by Engr in Charge.

Dismantling of Stone slabs and tiles of any description or thickness in floor or wall, aprons and laid badded and pointed in any mortar. Etc complete all as specified and as directed by Engr-in-charge.

M&L for 30mm thick PCC 1:2:4 type B0 (using 12.5 mm Graded Stone Aggregate) as in sub Floors, etc., and rough finish the Cement Concrete Surfaces to receive floor top, complete all as specified and as directed.

M&L for non skid ceramic colour tile 7- 8 mm thick (Square/ rectangular) area of each tiles exe 0.08 sqm but not exe 0.11 sqm as in floor set and jointed in neat cement slurry and pointed in colour cement to match the shade of tiles over and including 15mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed by Engr-in-charge.

M&L for glazed ceramic tiles, coloured,of size 300mm x 450mm x 7 to 10 mm thick on vertical surfaces such as dado, skirting etc. over and Including 15 mm thick rendering in CM ( 1:4), set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engr-in-charge.

M&L for vitrified tiles light shade (Double charged) 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floor etc.,set over and including 15mm thick screed bed in CM (1:4) and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match complete all as specified and as directed by Engr-in-charge.

M&L for 60 mm Machine pressed pre casted pressed cement concrete inter locking paver blocks coloured up to 6mm on the top with grey cement and pigment in any shape and size, strenth not less than M-35 incl 25mm thick sand cushioning all as directed by Engr-in-charge

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash priming coat complete all as specified and as directed by Engr-in-charge.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete etc., complete all as specified and as directed by Engr-in-charge.

M&L for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping J hooks complete all as specified and directed by Engr-in-Charge.

M&L for preparing New Steel and Iron Surfaces of any descriptions, over 100mm in width or girth and applying Two Coats of Synthetic Enamel Paint over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed by Engr-in-charge.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) steel/alluminium/ wooden/PVC not exceeding 1.5 Sqm each complete all as specified and as directed by Engr-in-charge.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) steel/alluminium/ wooden/PVC exceeding 1.5 Sqm but not exc 4 sqm each complete all as specified and as directed by Engr-in-charge.

M&L for aluminium colour powder coated anodised door and shutter single or double leaf glazed/pre laminated board exterior quality partly glazed/pre laminated board exterior quality party glazed panels fabricated including aluminium anodised beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Aluminium colour powder coated door frame section 101.60x44.45x1.93 mm fixed as per spd (b) Aluminium colour powder coated vertical section in shutter 85x44.45x2 mm as per spd & directed.Contd srl item no above (c) Aluminium colour powder coated Top & style shutter section 95.25x44.45x2.00 mm as per spd. (d) Aluminium colour powder coated tower bolt 02 Nos in each shutter 200 mm long as spd. (e) Aluminium colour powder coated handle 02 Nos in each shutter 150 mm long as per spd. (f) Aluminium colour powder coated middle lock rail/bottom rail section 150x44.2.65mm cat No.20002. Make-Jindal (g) Six lever mortice lock brass Make : Godrej/Classic on in each door. (h) 12 mm thick particular board (pre laminated both face) exterior grade ISI Marked (j) Tinted glass 5mm thick as per directed or site reqd. Make : Saint gobain/modgaurd. (h) Floor spring , Make Sandu Note: If ground requirement for full glass or full Panel, contractor should provide as per direction of Engr-in-Charge.

M&L for aluminium colour powder coated anodised window/vantilator with frame section 100x44x2mm fixed with thrust bolts in wall by drilling (any number of leaf) and comprising of the following :- (a) Aluminium colour powder coated sections in shutter 44x44x2 mm as per spd & directed. (b) Aluminium colour powder coated 100mm hinges 08 numbers. (c) Aluminium colour powder coated tower bolt 03 Nos in each shutter 150 mm long as spd. (d) Aluminium colour powder coated handle 02 Nos in each shutter 100 mm long as per spd. (e) Tinted glass 5mm thick as per directed or site reqd. Make : Saint gobain/modgaurd. (h) Aluminium powder coated grill make DG-104 fixed with H-section to frame

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed by Engr-in-charge.

M&L for suspended false ceiling consisting of suitable GI sections of ‘T’ Angle & FI as per Std engineering practices with ‘E’ board classic ceiling boards 4mm thick in grid of 0.60x0.60mtr including cutting holes and making good holes for main joints, suspending with 4mm dia GI wire to roof slab, roof trusses, purlins & rafters etc complete all as specified and as directed by Engr-in-charge.

M&L for 12mm thick Gypsum board false ceiling in designed pattern with 1.50mm thick GI channel frame work GI U-section 50mmx35mmx1.50mm & edge side GI L-section 30mmx25mmx1.50mm and fixed with screws and fastener with flush joint in required pattern and designed and joints punning with 1 to 2mm thick birla putty including suspenders, rubbing with sand paper and finishing with two coat of OBD over a coat of primer complete all as specified and as directed by Engr-in-charge.

M&L for Framed work such as grills, gratings,etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and like fencing post and similar work confirming to Fe-290, Gde-E-165 (Angle 50x50x6, round bar 10mm, Flat iron 40x6, Steel gate 40x40x6) complete all as specified and as directed by Engr-in-Charge.

Excavating in trenches in soft / loose soil, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed by Engr-in-Charge.

Returning, filling including spreading, leveling and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and as directed by Engr-in-charge.

Removing excavated soil to a distance exceeding 250 mtr but not exceeding 500 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and as directed by Engr-in-charge.

Note:- The amount of Rs 36,750/- against Schedule of Credit on Page No 129 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

M/S SURINDERAS CONSTRUCTION CO.

SACHDEVA ENGINEERING WORKS

M/S Parshant Associates

BRIJ MOHAN LAL AND CO.

M/s Durga Traders

H.B. Traders