Construction of 1 no. of ACR at HSS Sandhi, Pyt. KC Lower, Block Nagrota Under scheme CSS Dharti Aaba Janjatiya Gram Utkarsh Abhiyaan DA-JGUA For the year 2025-26

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and lying in position cement concrete 1 cement:5fine sand:10 graded crushed stone aggregates 40mm size.excludingthe cost of centring and shuttering all work upto plinth Level

Providing and lying in position cement concrete 1 cement:3fine sand:6 graded crushed stone aggregates 40mm size.excludingthe cost of centring and shuttering all work upto plinth Level

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All Work upto Plinth Level in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) mix.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement columns in 1:1.5:3 mix for columns

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree, landing balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding cost of centring, shuttering, finishing and reinforcement.1 cement: 1.5 coarse sand :3 graded stone aggregates 20mm nominal size. in 1:1.5:3 mix

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete .

Centring and shuttering including strutting, propping etc and removal of the formwork. Foundation

Centring and shuttering including strutting, propping etc and removal of the formwork. Columns

Centring and shuttering including strutting, propping etc and removal of the formwork. Sides and soffits of Lintel and beams and walls

Centring and shuttering including strutting, propping etc and removal of the formwork. Suspended Floor, Roofs ,Landing,etc

Centring and shuttering including strutting, propping etc and removal of the formwork. Edges of slab

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in:1cement : 6 coarse sand mortar.

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

15mm thick cement plaster of 1 cement: 6 fine sand mix.

12 mm thick cement sand plaster in 1:6 mix

6mm thick cement plaster of 1 cement: 3 fine sand mix.

Providing and laying vitrified floor tiles in 600mmX600mm size (thickness to be specified by manufacture) with water absorption less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment etc., complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shades, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of tile 600x600 mm

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete(1mm)

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood -With ISI Marked MS pressed butt hinges bright finished of required size with necessary screws (35mm thick)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.2nd class Kail wood 35mm thick.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 2nd class Kail wood 30 mm thickness

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 2nd class Kail wood 35 mm thickness

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class kail wood

Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete. 100x58x1.90 mm

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :250x16 mm

Providing and fixing Aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868 ) tranparent or dyed to required colour or shade with nuts and screws etc. complete

Providing and fixing Aluminium handles ISI marked anodized tranparent or dyed to required colour or shade with nuts and screws etc. complete

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter PIPE

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter BENDS

Providing and fixing glass panes in doors, windows, clerestory windows, all complete with : 5.0mm thick Glass

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Carriage of construction material: Sand 15 km Lead by MT

Carriage of construction material: Agg. 15 km Lead by MT

Carriage of construction material: Bricks 35 km Lead by MT

WASHROOM Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

P/Laying of cement conct.1:5:10 Of specified grade excluding the cost of form work, cement using 40mm N/ size of agg.

P/Laying of cement conc. 1:3:6 Of specified grade excluding the cost of form work, cement using 20mm N/ size of agg.

Brick work with brick of class designation 75 above plinth level upto floor V level in cement mortar 1:6 including super sturcture

P/Laying reinforced cement conc. 1:1.5:3 Of specified grade in RCC work excluding the cost of form work, cement using 20mm N/ size of agg.

Reinforcement for RCC work including straightening , cutting, bending, placing in position and binding all complete

Cetering and shuttering including strutting propping etc and removal of form for foundation footings, bases of columns etc for mass concret. PLINTH

Cetering and shuttering including strutting propping etc and removal of form for foundation footings, bases of columns etc for mass concret.SOFFIT

Cetering and shuttering including strutting propping etc and removal of form for foundation footings, bases of columns etc for mass concret. EDGES OF SLAB

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown

Providing 12 mm cement plaster of mix 1:6 fine sand

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing 15 mm nominal bore G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.

Providing and fixing 15 mm nominal bore brass bib cock of approved quality.

Providing and fixing 110mm dia uPVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap

Carriage of material with in avg. Lead from source to site of work Sand 15.0 KM by M.T

Carriage of material with in avg. Lead from source to site of work Aggregate 15.0 KM by M.T

Carriage of material with in avg. Lead from source to site of work Bricks 35.0 KM by M.T

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2*1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. i/c cost of conduit/channel

Wiring for Computer point/ call bell point with 3*2.5 sq.mm (P.N.E.) Multithread PVC insulated copper cable of approved quality in channel/ recessed steel conduit, with 2 no. 6 amp socket and 1 no. modular switch of approved quality complete job.

Supplying and fixing,"C" curve,miniature circuit breaker suitable for indicative load of following poles in the existing MCB DB complete with connections,testing and commissioning,etc as required 6/10/16 Amp Single pole MCB

Supply and fixing of 1200 mm sweep Ceiling Fan of approved quality complete with necessary connections

Supplying and fixing of 20/22watt LED 4feet tube light fitting/fixture aluminnium hosing with 2000 lumens and min lumen sefficiency 100 Lumens/watt

40 Amp Double Pole MCB

63 Amp double pole MCB

Supplying and fixing of 16 mm Aluminium flat twin core cable complete job

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 WAY DOUBLE DOOR

Sign Board including painting and writting complete job.