Construction of VHC Grade II Mandva Tq Washi Dist Dharashiv (BALANCE WORK) THIRD Call

Item No.1 :Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Add.Spec: Bd.A.1 Page No. 259 SSR 2022-23 Sr.No.714 It.No.21.02

Item No.3 :Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.Add.Spec: As directed by Engineer in charge. SSR 2022-23 Sr.No.747 It.No.21.40

Item No.06 :Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Add.Spec: Bd.F.5 Page No. 300 and B.7, Page.No. 38 SSR 2022-23 Sr.No.834 It.No.25.31

Item No.07 :Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Add.Spec: Bd.F.6 Page No. 300 and B.7, Page No.38 SSR 2022-23 Sr.No.839 It.No.25.50

Item No.08 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Add.Spec: Bd.F.8 Page No. 302 and B.7, Page No.38 SSR 2022-23 Sr.No.844 It.No.25.70

Item No.09: - Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Add.Spec: Bd.F.9 Page No. 303 and B.7, Page No.38 SSR 2022-23 Sr.No.849 It.No.26.05

Item No.10 :Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Add.Spec: Bd.F.17, Page No. 306 SSR 2022-23 Sr.No.864 It.No.26.33

Item No.12 :Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.Add.Spec: Bd.G. 1 Page No. 313 SSR 2022-23 Sr.No.882 It.No.27.01

Item No. 13 :Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Add.Spec: Bd.G.5 Page No. 315 SSR 2022-23 Sr.No.885 It.No.27.05

Item No. 14 :Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.e Add.Spec: Bd.G.5 Page No. 315 SSR 2022-23 Sr.No.885 It.No.27.06

Item No.15 :Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skA directed by Engineer in charge SSR 2022-23 Sr.No.829 It.No.33.51

Item No.16 :Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.With fine aggregate (Crushed sand VSI Grade) Add.Spec: As directed by Engineer in Charge: SSR 2022-23 Sr.No.834 It.No.32.26.

Item No.17 : Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. Add.Spec: As directed by Engineer in charge. SSR 2022-23 Sr.No.978 It.No.32.34 Add.Spec:BD-T-36 Page One Number 500 SSR 2022-23 It.No32.34

Item No.18 :Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc.complete. Add.Spec: Bd. L.2 Page No. 368 SSR 2022-23 Sr.No.950 It.No.32.03

Item No.19 :Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete Add.Spec: Bd.L.4 Page One Number 368 SSR 2022-23 Sr.No.839 It.No.32.06.

Item No.20 : Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.Additional Specification Bd. L.10, Page One Number 370 SSR 2022-23 Item No.32.15

Item No.21 : Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Add.Spec: Bd.L.7 Page No. 369 SSR 2022-23 Sr.No.956 It.No.32.11

Item No.22 :Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete Add.Spec: Bd.L.4 Page One Number 368 SSR 2022-23 Sr.No.839 It.No.32.06.

Item No.23 : Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete.Additional Specification As directed by Engineer in charge.SSR 2022-23 Item No.32.21

Item No.24:- Providing patti/ band 75mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete.Additional Specification As directed by Engineer in charge. SSR 2022-23 Item No.32.23

Item No.25 :- Providing patti/ band 100mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. Add.Spec:As directed by Engineer in charge.SSR 2022-23 Sr.No.844 It.No.32.24

Item No.26: Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil As directed by Engineer in charge. SSR 2022-23 Item No.39.01.

Item No.27 :Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm .Additional Specification As directed by Engineer in charge. SSR 2022-23 Item No.39.56

Item No.28 :Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Add.Spec: BD-T-34 Page One Number 499 SSR 2022-23 It.No.39.09.

Item No.29 :Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either sfalt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares. Add.Spec: As directed by Engineer in charge.SSR 2022-23 Sr.No.950 It.No.39.47.

Item No.30: Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete..Additional Specification As directed by Engineer in charge.SSR 2022-23 Item No.39.68.

Item No.31 : Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising without boxAdditional Specification As directed by Engineer in charge. SSR 2022-23 Item No.39.38.

Item No.32:- Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising without box As directed by Engineer in charge. SSR 2022-23 Item No.39.42

Item No.33: Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Add.Spec: Bd.U.1 Page One Number 537.SSR 2022-23 It.No.40.01

Item No.34 : Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. BD-T-57 Page One Number 511.SSR 2022-23 Item No.39.26.

Item No.35 : Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.Add.SpecBd.M. 12 Page One Number385 SSR 2022-23 It.No33.40

Item No.36 : Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. Skirting complete.Add.SpecBd.M. 12 Page One Number385 SSR 2022-23 It.No33.41

Item No.37 : Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete..Add.SpecBd.M. 12 Page One Number385 SSR 2022-23 It.No33.24

Item No.38 : Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.Add.SpecBd.M.13 Page One Number 386. SSR 2022-23 It.No33.25

Item No.39 : Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete...Add.SpecBd.M.22 Page One Number 390 SSR 2022-23 It.No33.18.

Item No.40 :Providing sills of polished Kota stone 25 mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing,moulding edges, polishing and cleaning etc. complete.Add.SpecBd.M.29 Page One Number 391 SSR 2022-23 It.No33.19.

Item No.41 :Providing and fixing black kadappa stone as shelves 25mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete.Add.SpecBd.M.29 Page One Number 391 SSR 2022-23 It.No33.23.

Item No.42 : Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kilogram/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Add.Spec: Bd.V.5 Page One Number 551 SSR 2022-23 It.No.41.10.

Item No.43 :Providing and fixing on walls/ ceiling/ floors 20 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93 Kilogram/meter with necessary fitting remaking good the demolished portion and applying primer of anti-corrosive oil paint, 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.. Add.Spec:Bd.V.5 Page One Number 551c SSR 2022-23 It.No.41.11.

Item No.44 :Providing and fixing on walls/ ceiling/ floors, 25 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01 Kilogram/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Add.Spec:Bd.V.5 Page One Number 551 SSR 2022-23 It.No.41.12.

Item No.45: Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Add.Spec: Bd.V.8 Page One Number 554.SSR 2022-23 It.No.41.40.

Item No.46: Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.Add.Spec: Bd.V.8 Page One Number 554.SSR 2022-23 It.No.41.41.

Item No.47: Providing and fixing 25 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Add.Spec: Bd.V.8 Page One Number 554.SSR 2022-23 It.No.41.42.

Item No.48: Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. Add.Spec: As directed by Engineer in charge.SSR 2022-23 It.No.42.33..

Item No.49:Providing and fixing coloured glazed earthenware lipped flat back/corner type urinal with PVC 5 liters flushing cistern with fittings,capacity with fittings, inlet pipe and stop tap, brackets for fixing the cistern, P.V.C. flush pipe with fittings including lead soil pipe, lead trap and soil pipe connection up to the outside face of the wall. Add.Spec:Bd.V.27 Page One Number 564 SSR 2022-23 It.No.41.61..

Item No.50: Providing and fixing coloured glazed earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.. Add.Spec: Bd.V.30 Page One Number 565.SSR 2022-23 It.No.41.66..

Item No.51: Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, As directed by Engineer incharge. SSR 2022-23 Item No.42.52.

Item No.53:Providing and fixing 10 cm PVC nahani trap with grating etc. complete.Add.Spec:BD.V 32 A page 551 and as directed by Engineer in charge.SSR 2022-23 It.No.42.67.

Item No.54: Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.Add.Spec: Bd.V.38, Page One Number 572.SSR 2022-23 It.No.42.02.

Item No.55: Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 litersAdd.Spec: As directed by engineer-in- charge..SSR 2022-23 It.No.42.53.

Item No.56: Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.Add.Spec: Bd.V.43, Page One Number 574 SSR 2022-23 It.No.42.12.

Item No.57:Providing, laying and fixing P.V.C. pipe of 40mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete..Add.Spec: As directed by Engineer in charge.SSR 2022-23 It.No.43.25.

Item No.58 :Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Add.Spec: Bd. F. 12 Page One Number 304 and B-7, Pg 38 SSR 2022-23 Sr.No.1207 It.No.26.23.

tem No.59 :Providing and applying Bitumen VG30/VG40 layer at 2 Kilogram. per One Square Meterr over the terrace, structural slab including cleaning the surface for waterproofing as directed complete Add.Spec: Bd.J.3 Page One Number 356SSR 2022-23 It.No.31.02.

Item No 60 : Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary .Additional Spec As directed by Engineer in charge. SSR 2022-23 Item No 35.26

Item No.61 : Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc.complete.Add.Spec:As directed by Engineer in charge. SSR 2022-23 It.No.26.23.

Item No.62 :Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.Add.Spec:Bd.O.5 Page One Number 405. SSR 2022-23 It.No.35.07.

Item No.63 :Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame). Add.Spec: As directed by Engineer in charge.SSR 2022-23 Sr.No.1023 It.No.37.21.

Item No.64:Providing and fixing during laying in RCC Slab rectangular 2 mm thick M.S. sheet fan hook box of size 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface..Add.Spec: As directed by Engineer in charge.SSR 2022-23 It.No.26.68.

Item No.65:Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.Add.Spec: As directed by Engineer in charge.SSR 2022-23 It.No.42.20.

Item No.66 :Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge etc. complete.Add.Spec:As directed by Engineer in charge SSR 2022-23 Sr.No.1100 It.No.32.22.

Item No 67 : Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete.Additional Spec As directed by Engineer in charge. SSR 2022-23 Item No 42.31.

Item No.1 :Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Add.Spec: Bd.A.1 Page No. 259 SSR 2022-23 Sr.No.714 It.No.21.02

Item No.2 :Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.Add.Spec: As directed by Engineer in charge. SSR 2022-23 Sr.No.747 It.No.21.40

Item No.3 :Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Add.Spec: Bd. E. 1 Page No. 287 SSR 2022-23 Sr.No.820 It.No.24.01

Item No.4 :Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. Add.Spec: Bd.H.1 Page One Number 329 SSR 2022-23 Sr.No.714 It.No.28.01

Item No.5 :Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Add.Spec: Bd. F. 12 Page One Number 304 and B-7, Pg 38 SSR 2022-23 Sr.No.1207 It.No.26.23.

Item No.6 :Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Add.Spec:Bd.F.11 Page One Number 304 and B.7, Page One Number 38. SSR 2022-23 Sr.No.747 It.No.26.17

Item No.7 :Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Add.Spec: Bd.F.17, Page No. 306 SSR 2022-23 Sr.No.864 It.No.26.33

Item No.8 :Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.Add.Spec: Bd. L.2 Page One Number 368 SSR 2022-23 Sr.No.820 It.No.32.04

Item No.9 : Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete.Additional Specification As directed by Engineer in charge.SSR 2022-23 Item No.32.21

Item No.10 :Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.Add.Spec: Bd.C.2 Page One Number 275 SSR 2022-23 Sr.No.864 It.No.23.01.

Item No.11 : Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.).Additional Specification Bd.R.5, Page One Number 453.SSR 2022-23 Item No.38.04

Item No.12 :Providing and laying in trenches 32 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Add.Spec:BD.V 5 page 551 and as directed by Engineer in charge SSR 2022-23 Sr.No.1100 It.No.42.64.

Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessories etc. complete.crate shed and Trough.

Item No.69 : Charges for testing of material in vigilance & quality control laboratory For Concrete Compressive Strength OF C.C. Cube (Set of 3 cubes).

Item No.72 : Royalty Charges a) Sand = Royalty + surcharge (2%) As Per SSR 2022-23 The Government of Maharashtra, Revenue and Forest Departments Gazette No.146 Dt.04 June 2021

Royalty Charges For Supply of Soil 40mm/80mm Metal (Hand Broken)