REPAIR TO COMPOUND WALL, CHAINLINK FENCING, PATHWAY AND HARDSTANDING UNDER AGE BR-I AT AF STATION PUNE

Amount

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level and removing demolished material out of Military station complete all as specified and directed.

Demolition of cement concrete in any description and any position not otherwise specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition), complete all as specified and directed.

Dismantling chain link fencing/expanded metal or mesh not exceeding 4kg/Sqm fixed in steel, wood fillets, concrete post etc. of any description complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling posts or struts (wood,steel or RCC)any section ,including taking out embedded in concrete or brickwork complete all as specified and directed.

Demolition of stone slabs and chequered tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar complete all as specified and directed.

Demolition of bricks (laid flat or on edge) or interlocking tiles in floors, channels, kerbs, aprons, etc laid dry of laid dry and pointed complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed

Demolition of Brick/precast concrete block/Stone/boulder masonary walling built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed.

Providing and fixing Precast cement concrete Type C1 1:3:6(20mm graded aggregate) in Framework for louvers and jallis, lintles, string courses, precast posts,fencing posts, boundary pillars with plain fair faces including chamfers,weatherings,throating etc setting in CM 1:4 complete with joints to match complete all as specified and directed.

Providing and fixing Precast cement concrete louvers and jallies of minimum 25mm thick Type B0 1:2:4(20mm graded aggregate) (measured solid) set in cement mortar 1:4 ,including all moulding but excluding frame complete all as specified and directed. (pre cast frame shall be measured separately as Ser Item No. 11.00 above)

M&L form work to rough finished surface to sides of beams, sides and sofits (if any) of foundations and plinth beams and similar works: verticals or to batter complete all as specified and directed.

M&L form work to rough finished flat surfaces to sides of pillars, posts, struts, piers, columns ans stanchions complete all as specified and directed.

M&L RCC type B11:2:4 (20 mm grade aggregate ) in beams,plinth beams,Lintels etc,basement slabs , under reamed piles ad mass concrete complete all as specified and directed.

M&L RCC type B11:2:4 (20 mm grade aggregate )in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC Type B1 1:2:4 (12.5mm grade aggregate ) in Copings, kneelers, apex stons, Kerbs etc including weathering,slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for brocken glass coping on top walls in cement mortar 1:3 including dimolition of old existing glass coping(if required) and removing the rubbish complete all as specified and directed.

Mild steel TMT bars10mm dia and over, cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed.

Ditto all as per Ser Item No. 19.00 above but 6 to 8mm dia as in stirrups complete all as specified and directed.

M&L for Fe 410-W (GdeE- 250) quality A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Ditto all as per Ser Item No. 22.00 above but except blocks complete all as specified and directed.

M&L random rubble stone masonary well bonded bedded solidily hearted in CM 1:4 complete all as specified and directed.

Ditto all as per Ser Item No. 24.00 above but except stones complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick works finished even and fair without using extra cement in cement mortar 1: 4 complete all as specified and as directed

M&L for 15 mm thick rendering on stone masonry works or other than fair faces of brick work or concrete surface finished even and fair without using extra cement in cement mortar 1: 4 complete all as specified and as directed

M&L Flush pointing to random rubble,uncoursed or brought upto courses in CM 1:4 complete all as specified and as directed.

Supply only Liquid water proofing copmpund complete all as specified and directed.

Supply and fixing mild steel work as in angle iron, flat iron of any size for post and struts as in fencing including, cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets for securing wire mesh ,chain link fencing etc including all necessary drilling bolting or riveting etc and/or fixing with screws, bolts etc. and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Ditto all as per Ser Item No. 30.00 above but fixing only complete all as specified and directed.

M&L Chimney bars(straight or camber),bearing bars for fencing ,ton-gues or water bars for window frames, window guard bars,plain,let in and fixed independently in wooden frames,Lor Tsection supports for shelves etc,and similar articles conforming to Fe-290 Gde E-165, including applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards,rails, straining bolts,etc.including provision of binding wire complete all as specified and directed.

Supply only chain link MS galvanised fencing of weight not less than 3.5 Kgs per sqm and size complete all as specified and directed.

M&L for PCC type C-2, (1:3:6) , using 40mm graded crushed stone aggregate as in lean conc , sub base ,or mass conc , foundation filling etc. complete all as specified and directed.

S & F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) incl removal of old unservicebale barbed wire complete all as specified and directed.

S& F in repairs wire entanglements wth galvanised steel concertina coil of dia 600 mm reinforced with punched (chrome rajor of blade wire) barbed tape of 2.5mm thick galvanized steel sheet at 75mm saplings and core wire of dia 2.24mm high tensile steel wire complete all as specified and directed.

M&L for preperation of new plastered wall surface of any description and applying two coat of cement based paint over a coat of chalk whiting complete all as specified and as directed.

M&L for preparation of old plastered wall surface of any description and applying one coat of cement based paint complete all as specified and as directed.

M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc. complete all as specified and directed.

M&L for sand filling (30 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and directed.

M&L Glossy finish machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickiness M-35 grade complete all as specified and directed.

M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as in floors ,plinth protection and pavings finished with spike rolling to surface or making impressions of expanded metal ,whilst the concrete is green complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'B' in plinth protection complete all as specified and directed.

M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc. complete all as specified and directed.

M&L PCC 1:2:4, 25 mm thick type B0 using 12.5mm graded stone aggregate as in floor finished even and fair with out using extra cement complete all as specified and directed.

M&L for Glossy finish Chequered cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with whitecement & pigments .Layed over 20mm thick cement screed base (1:6) complete all as specified and directed.

M&l for PCC type D-2(1:4:8) using 40mm graded crushed aggregate as mass concrete and filling of foundation complete all as specified and directed.

M&L dressed granite or trap /Precast cement concrete type C2 (1:3:6) (12.5 mm nominal size of graded course aggregate) Kerb stones roughly squared/rectangular pieces of minimum thickness 15cm and height 30 cm ,so that the maximum depression from a straight edge held against the dressed surface shall noot exceed 6mm for top and exposed surfaces of sides and 15mm for the rest of surfaces jointed in cement mortar 1:6 and struck finish complete all as specified and directed. ( rate inclusive for removal of old damaged curb stones of any description).

M&L for preparation new steel surfaces of any description, not otherwise described, over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of Red oxide primer complete all as specified and as directed

R K ENTERPRISES

Smruti Construction

M/s Kirti Enterprises

AJAY ENTERPRISES