Repair/maint to joint filling epoxy treatment, PQC, PME, painting and connected items at AF Stn Bihta.

Amount

Preparation & Cleaning of old surfaces of concrete by rubbing down & washing with soap water & appyling one coat of special road marking paint ( water base ) white yellow or orange , black as in line , arrows,dashes letters etc .exe 10cm in width on ruanway & taxi track/dispersal area complete all as specified & directed by Engineer-in-Charge.

Preparation & Cleaning of old surfaces of concrete by rubbing down & washing with soap water & appyling one coat of special road marking paint ( water base ) white yellow or orange , black as in line , arrows,dashes letters etc .not exe 10cm in width on ruanway & taxi track/dispersal area complete all as specified & directed by Engineer-in-Charge.

M&L for repair of Expansion Joints (10mmx25mm) on PCC pavements by racking out existing sealing compound cleaning thejoints thoroughly cleaned by compressed air and priming the sides with bituminous primer and sealing joints by filling sealing compound grade B ( Jet fuel resistance) as per IS-1834-984 inncluding removal complete all as specified & directed by Engineer-in-Charge.

M&L for repair of Construction Joints (10mm x 25mm) on PCC pavements by racking out existing sealing compound cleaning thejoints thoroughly cleaned by compressed air and priming the sides with bituminous primer and sealing joints by filling sealing compound grade B( Jet fuel resistance) as per IS-1834-984 inncluding removal complete all as specified & directed by Engineer-in-Charge.

M&L for repair of Dummy Joints/Contraction joint (10mm x 25mm) on PCC pavements by racking out existing sealing compound cleaning thejoints thoroughly cleaned by compressed air and priming the sides with bituminous primer and sealing joints by filling sealing compound grade B( Jet fuel resistance) as per IS-1834-984 inncluding removal complete all as specified & directed by Engineer-in-Charge.

M&L for repair to broken / damaged portion of concrete slab or pavement by cutting damaged portion spoiled edges of slab to rectangular cross section and removing all loose dirt and forigen materials and depositing the same to a distance exceeding 150m and n. exc 250m and cleaning the surface by compressed air to remove all loose dirt, dust,and forign materials etc and filling epoxy resin mortar after application of epoxy resign primer including necessarybform work required complete al as specified and directed as per manufactur's instructions complete all as specified & directed by Engineer-in-Charge.

Clearance of shoulders of air field by cutting grass, vegetation, shrubs, bushes, small tree using tractor with rotary Mulcher (grass cutter) on hourly basis including tractor, driver and one unskilled labour from 0800 hrs to onwards and removal of rubbish (cut grass) from the area of runway and taxi track where directed complete all as specified and as directed by the Engr-in- charge.

Note :- (i) Time of work hours will be accounted from starting of work actually at site not at the time reporting of tractor at Site (ii) Contractor can be directed to provide more than on tractor with rotary Mulcher at at time as per user’s /site requirement. (iii) Log book shall be maintained by contractor for every tractor with time, date and location and shall be produced along with every payment duly signed by both parties for tech check. (iv) The cut grass shall be sweeped with brooms from near runway and taxi track immediately after cutting. (v) Contractor shall provide min 02 Nos tractors with one rotary Melcher and one unskilled labourer per tractor . In case the contractor fails to provide the requisite no of tractors alongwith labour with in three days of demand by the departmental. A penalty @ Rs 1800/- per tractor with mulcher and Rs 1800/- per tractor with mulcher and Rs 500/- per labour shall be recovered from the contractor.

Complete removal of existing treatment & Material Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified & directed by Engineer-in-Charge.

Hiring of 01 Nos of JCB POL and 01 Nos driver for excavating (inside MOD Land), loading spreading of earth material complete all as specified & directed by Engineer-in-Charge.

Hiring tractor with trolly including POL and 01 Nos driver for transporing & unloading of earth material complete all as specified & directed by Engineer-in-Charge.

Rolling and consolidating formation surfaces by power mechanical roller exc 8 tonne & nexc 12 tonn in cutting/filling include for watering as necessary and consolidating to the required level, gradient or camber, keeping roller wheels wet, if required, filling in hollows and depressions complete all as specified & directed by Engineer-in-Charge.

M/S ANAND MOHAN ENTERPRISES