Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹86.7 LAccepted-AOC IV 54 DIVYA COMPLEX RAJEEV NAGAR BOY S COMPANY ARUVANKADU THE NILGIRIS 643202 | ARUVANKADU | THE NILGIRIS | TAMIL NADU | 643202 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹89.1 L+₹2.4 L (2.73%)Rejected-Finance 1 181 KAMATCHI AMMAN KOVIL STREET KANNAN COLONY CHINTHAMANI MADURAI 625009 | MADURAI | MADURAI | TAMIL NADU | 625009 | L2 | Rejected-Finance Being not L1 | |
| 3 | L3₹93.7 L+₹7.0 L (8.06%)Rejected-Finance 606 80 FEET ROAD 7TH BLOCK 2ND PHASE BANASHANKARI 3RD STAGE BANGALORE 560 085 | BANGALORE | BANGALORE | KARNATAKA | 560085 | L3 | Rejected-Finance Being not L1 | |
| 4 | L4₹96.9 L+₹10.2 L (11.8%)Rejected-Finance THE JEHOVAH SHALOM 21 THIRUMALAISAMY STREET LAKSHMI NAGAR EXTN KAVUNDAMPALAYAM COIMBATORE 641030 | COIMBATORE | COIMBATORE | TAMIL NADU | 641030 | L4 | Rejected-Finance Being not L1 | |
| 5 | L5₹97.7 L+₹11.0 L (12.7%)Rejected-Finance | L5 | Rejected-Finance Being not L1 |
Tender Value
₹97.9 L
EMD Value
₹1.7 L
Closing Date
4 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Neeraj Mehrotra, IDSE, CWE
Commander Works Engineers AF South Gangamma Circle Opp Guard Room 410 AFS Jalahalli Bangalore 560013
Addn altn improvement to buildin Nos T20 P19 P9A P38 P73
2023_MES_611530_1
84232/E8
Open Tender
Civil Works
Item Rate
270 days
AGE (I) (AF) Coimbatore
As per tender documents
7 documents required · 7 mandatory
₹1,000
AGE (I) (AF) Coimbatore
₹1.7 L
21 Dec 2023
1 Aug 2023
6 Sept 2023
1 Aug 2023
4 Sept 2023
23 Aug 2023
1 Aug 2023 - 14 Aug 2023
Amount
Dismantling floors, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises
Demolition of Cement concrete in below or above ground level and paving not exc 15 cm thickness
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles
M&L 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded aggregate as in sub base of floors all as specified.
M&L for Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes
M&L Virified Ceramic tiles as light shade 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface.
All as per Item No. 06 above, but dark shade vitrified ceramic tiles
All as per Item No: 07 above but in vertical surfaces as in Skirting/dado
M & L Non-skid coloured ceramic floor tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface.
M & L Non-skid coloured ceramic floor tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface.
All as per Item No: 10 above but as in vertical surfaces as Skirting/dado
M & L Glazed coloured ceramic tiles in vertical surface 50x250x7mm/450x350x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and as directed by Engr-in-charge..
M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 as in backing coat of skirting /dado all as specified and directed.
M&LBrick work with fly ash bricks, straight or curved on plan exc 6 mtr mean radius built in CM 1:6 with old size bricks
M&LBrick work with fly ash bricks, straight or curved on plan exc 6 mtr mean radius in half brick thick walls built in CM 1:6 with old size bricks
Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbling down with water, etc all as specified and directed.
M & L Rendering in CM 1:6, 10mm thick on fair faces brick or concrete surfaces finished even and smooth without using extra cement
M & L prepation of newly plastered wall surfaces, apply 3mm thick wall care putty and applying two coats of distemper oil emulsion over over a coat of primer all as specified and as directed by Engr-in-charge.
M & L for complete removal of existing treatment of wall, apply 3mm thick wall care putty, one coat of (chalk whiting) primer and two coat of oil bound distemper all as specified and as directed
M & L for prepation of old treated wall surfaces and applying one coat of oil bound distemper all as specified and directed
M & L for rendering in CM 1:4, 15mm thick on fair faces brick or concrete surfaces finished even and smooth without using extra cement
M&L for Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer.
M & L preparation of old treated wall surfaces and applying one coat of cement base paint of approved shade all as specified and as directed by Engr-in-charge.
Preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.
M&L for Preparation of old steel surface and applying one coat of synthetic enamel paint all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames of stone, concrete or brick surrounds, glazed with putty or fixed with beads.
S&F Sheet glass, ordinary quality 4mm thick and glazing with oil putty or fixed with beads in square n.exc 0.5 sqm in each pane.
Taking down chowkhats or frames with shutters (without taking off the shutters from the frames) size not exc 1.50 sqm all as specified and directed.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded
S & F for Second class hard wood with plain, framed, panelled shutters 35mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats
S & F for Second class hard wood with plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints
S & F Butt hinges medium weight cold rolled mild steel, and fixed 100 mm size
S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised butt hinges, heavy weight, cold rolled mild steel and all as specified and directed
All as per item No.33 above but for 125mm long handles
S&F 200mm long Aluminium anodised barrel towers bolts of extruded section and all as specified and directed
All as per item No.35 above but for 150mm tower bolts
S&F 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete and all as specified and directed
S & F MS hold fast for doors and windows etc complete all as specified and directed.
S & F Floor door stopper 140mm long with cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor
S&F 25 mm dia SS drapery rod , including brackets, decorative knobs at both ends & curtain rings 8 Nos (minimum) complete all as speccified and directed.
Preparation of new wood or wood based surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
Removing building material out side the campus including loading and unloading etc., to a distance exc 5.0 Km but not exc 10.0 Km out side the MD land ( Ministry of Defence) where responsibility regarding place of deposition and obtaining permission from all authorities etc., in this regard will be of contractor responsibility and all as specified.
M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with gray cement slurry and pointed with white cement withadmixture of pigment to match the shade of granite stone including 15mm thick screed bed or bedding layer of in CM 1:6 all as specified and as directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connection union to pipe, overall size 915X460mm bowl size 410mmX330mmX160mm complete all as specified and directed.
Taking up or down steel tubing and connections, and removing to store for taking in account of credit for 15mm bore complete all as specified and directed.
All as per item No.45 above but for 20 mm bore
S&F 20 mm dia 3- layer PP-R Polyproperlene random copolymer) concealed pipes SDR 7.4 (PN 16) UV stablized and antimicobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polyproplene random fittings fixed to walls, ceiling or in floors etc complete all as specified and directed.
All as per item No.47 above but for 25 mm bore
M & L for PVC (SWR) multi floor trap of 75mm dia with grating including jointing with solvent cement etc complete,
S & F Unplasticised PVC pipe 50mm dia of pressure rating 10 kgf /cm2 fixed complete to walls, ceiling or in floors etc complete
S & F PVC (SWR) pipe 75mm dia single sockted in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S & F PVC (SWR) pipe 110mm dia single sockted in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S&F PVC (SWR) bends 110mm radius complete all as specified and directed.
M & L for PVC (SWR) gully trap of 125/110mm dia includingsetting jointing with solvent cement etc complete,
S&F in repairs Bib taps, brass chromium plated fancy type with cruch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore.
S&F 20mm bore Gun-metal , globe or gate valve, with iron wheel head, screwed both ends for iron pipe fixed complete all as specified and directed.
S&F brass chromium plated health faucet with hand held and spring operated control valve with PVC flexible pipe connection of suitable length as directed fixed to 15 mm bore pipe.
S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white including seat cover and flush pipe etc complete all as per specified and as directed by Engineer-in-Charge.
S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 Ltrs capacity , low level , white, with inlet , ball valve, float and handle including brackets and flush pipe etc complete all as specified and as direted by Engineer-in-Charge.
S& F in repair Vitreous China wash basin, white, flat back, size 450x300mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including 32mmPTMT waste coupling complete all as specifed and directed.
S & F 110mm bore PVC (SWR) vent cowl
S & F PVC connections 15 mm size with PTMT nuts of length 450 mm
S&F in repairs chromium plated angle valves, cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed. 15 mm size.
S&F in repairs Pillar taps fancy type cast copper alloy, with capstain head, chromium plated screwed down high pressure, with long shanks and fly nuts screwed for iron pipe and fixed 15 mm bore.
S&F in repairs white toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws.
S&F in repairs 125mm dia shower rose brass chromium plated with or without seivel joints, including fixing to steel pipe or union complete all as specified and directed.
S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suplying and fixing in opening as per specification and drawing etc complete all as specified and as directed by Engineer- in-Charge.
S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rial, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement , suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and as directed by Engineer-in-Charge.
M & L for Cement concrete 1:3:6 type C1 using 20mm graded stone aggregate, 75 mm thick as in Plinth protection including necessary form work as required.
M & L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mmincluding excavating channel along the wall and rodding etc. complete all as specified and as directed by Engr-in-Charge.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel wire staples
M & L for 18/19mm thick prelaminated particle board , exterior gragrade , prelaminated both side with decorative choice laminarion and and fixed with screw to frame etc complete all as specified and as diirected.
S & F Continuous (piano) hinges 40mm width of flaps, mild steel, bright finish or electrogalvanised
S&F 100mm hasp and staple, safety type, aluminium anodised.
M&L Mild steel framed work such as grills ,grating etc with ends of bars shouldered or riveted, or forged into spikes conforming to Fe 290-Gde -E-165.
S & F rolled mild steel work in tubular trusses including special shaped washer etc.complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240.
S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc to FE 410-W (Gde-E-250) quality -A
Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings
S & F Pre - painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of any color having tensile stregth of 550 Mpa as in roof covering/cladding fixed to walls fixed with self tapping screws as specified.
S & F Pre - painted galvalume aluminium zink coating GI based plain steel sheet 0.50 mm thick of any color having tensile stregth of 550 Mpa as in roof covering/cladding fixed to walls fixed with self tapping screws as specified.
M & L for preparing new steel and iron surfaces of any description over 10 cm in width or girth, priming with red oxide and applying two coats of synthetic enamel paint over a coat of red oxide primer
M & L for anodised aluminium frame for aluminium cabin/partitions with one or more rebates including joining cleats for fixing and fixing to floor etc complete all as specified
M & L for 12mm thick veneered particle boards exterior grade solid core,as in cabin partition/general purpose type with face vineers of BB fixed with screw etc all as specified and as directed.
M & L for sheet glass 5.5mm thick ordinary quality and glazing with rebates/aluminium beading exc. 0.5 sqm in each pane.
Dismantling ceiling boards any description any thickness including cover fillets all as specified and directed
Supply and fix anodised aluminium snap grid of size 605mm x 605mm frame work for false ceiling using 25 x 23 x 1.5mm tee both ways & wall angle of 35 x 25 x 1.5mm (wall angle to be fitted to walls by screwing on wooden plugs, inserted in walls at every60 cm c/c and neatly sealed the cutting opening) and provide 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre fixed or laid / inderted to aluminium frame work with screws including hangars 6 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long (all costs are included) all as specified and as directed. Make : Hindal Co / Ajith India / Best lock Make of Particle Board : Anchor / Green ply / Indian Plywood (All ISI marked).
M&L for one coat of acrylic distemper over a coat of primer over calcium silicate false ceiling boards including preparation of surfaces.
Supply only 4mm sheet glass, ordinary quality , n exc 0.5 sqm in each glass all as specified and directed.
Supply only 3 mm figured glass, ordinary quality , n exc 0.5 sqm in each glass all as specified and directed.
M&L for sand cushioning under floor or in foundation including watering and consolidation for laying of interlocking pavour block.
M & L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry in floors with white cement and pigments
M&L for Screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying floor finishes
Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof SS wire mesh (Two nos glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116x45mm & sash 46x62mm both having wall thickness of 2.3+ 0.2mm and single glazing bead/double glazing bead of appropriate dimension. ( Area of window above 1.75 sqm) comprising of uPVC multi chamfered frame, with inbuilt roller track and sash extruded profiles duly reiforced with 1.60+0.2mm thick galvanised mild steel section made from roll forming process of required length ( shape and size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC exruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (Weight bearing capacity to be 40kg), GI fastners 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fuson welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame , the gap between frameand adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and approved quality , complete all as specified and directed by Engineer-in-Charge. (Glass or wire mesh shall be paid separately)
Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47x50mm mullion 47x68mm both having wall tickness of 1.9+ 0.2mm and single glazing bead of appropriate dimension. ( Area upto 0.75 sqm) comprising of uPVC multi chamfered frame,and mullion (where ever required) extruded profiles duly reiforced with 1.60+0.2mm thick galvanised mild steel section made from roll forming process of required length ( shape and size according to uPVC profile), uPVC extruded beads of appropriate dimension of EPDM gasket, GI fastners 100 x 8mm size for fixing frame to finished wall, plasyic packers, plastic caps and necessary stainless steel screws etc. profile of frame shall be mitred cut and fuson welded at all corners,mulion (if required) shall be also fusion welded including drilling of holes for fixing of hardwares and drainage of water etc. After fixing frame , the gap between frameand adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and approved quality , complete all as per approved drawing & direction of Engineer-in-Charge. (Glass or wire mesh shall be paid separately)
Removal of Plants/ Shrubs grown on walls/ slabs/beams by making holes or demolition of concrete etc and including applying suitable chemical for killing the roots of Plants, filling of holes with concrete and making good complete all as specified and directed.
Chipping/removing loose concrete in cloumns/beams/ chajjas/roof slab etc. up to reinforcement bars without damaging the reinforcement, removing all the loose material and to make all the exposed surface free from dust and all impurities etc complete all specified and directed.
Removing corrosion of steel reinforcement by mechanical means like wire brushing, chipping to remove loose rust and then applying rust removal solution Reebaklens RR of Fosroc / Sika Rust off 100 / equivalent in bostic India Ltd by using brush application, leaving the surface for at least 15 to 30 minutes, then removing loose materials by scrubbing or with brush and applying anti corrosive coating to reinforcement Nitozinc primer of Fosroc/Sika Friazinc R / equivalent in Bostic india Ltd , all as recommended by product manufacturer.
Providing and applying one coat of structural grade epoxy coat by brush of approved make . Mixing of two components will be as directed by manufacturer .Application shall be provided not more than 5 hours before application of micro concrete/polymer mortar etc complete all as specified by the manufacturer. Make :- Nitobond EP of FOSROCK/ Sikdur 32LP/ equivalent in Bostic India Ltd
Providing and applying n exc 40 mm thick (In layers of each 10mm thick) Shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar Renderoc SP 40 of Fosroc / Sika plastocrete plus/ equivalent in bostic India ltd, mixed with water in a water & powder ratio 0.18 in ceiling of roof slab/Chajjas/Beams/Parapet walls etc . Note:- Quoted tate is deemed to be inclusive of provideing scaffolding for working in patches upto a height of 15 Mtr complete all as specified and directed.
Cleaning of clay tile roof and removing all loose tiles, vegetation grown etc all as specified and directed by E-I-C.
Taking down existing roof treatment including clay tiles, screed bed , APP membrane etc top of roof slab and cleaning with wire brushe and washing with water complete , including removal and dispose off the debris all as specified .
Hydraulically pressed burnt clay tile plain of size 200x200x19/20mm machine made laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement
M&L for PCC 1:2:4 type B0 using 12.5mm graded stone aggregate for filling of potholes in roof.
Supply and application of single component, seamless, spray applied, hybrid elastomeric PU based material i.e Nitoproof 725 of Fosroc chemicals (or) sikalastic 590 of Sika India Pvt Ltd (or) equivalent in any approved make as approved by GE over a coat of primer i.e Nitoproof WB primer of Fosroc chemicals (or) diluted sikalastic 590 of Sika India Pvt Ltd (or) equivalent in any approved make as approved by GE, all as recommended by manufacturer ans as specified. Note:-(i) Average minimum DFTof PU based material shall be 1mm and shall be applied by using a Graco pump. (ii) PU based material shall process the following properties solids by volume -65%, tensile strength ASTM D412-1.75Mpa, density 1.3 g/ml, elongation ASTM D-412-350%, Adhesion to substrate concrete-1.9Mpa, resistance to water-10m pressure. (iii) Rate are deemed to be include for cleaning and preparation of surface to receive PU water proofing system including filling of cracks with cementitious repair mortars i.e renderoc CS of Fosrock chemicals (or) equivalent of approved make. (iii) Work shall be got carried out by authorised applicator of the manufacturer and it shall be got approved by the GE before progressing the work. (iv) 10 years of guarantee shall be provided and security amount shall be deposited as speicified in tender documents.
M & L Rendering in CM 1:3, 5mm thick on fair faces of brick work or concrete surfaces on ceiling complete all as specified.
M & L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling.surface all as specified.
M&L for Rendering with WPC in CM 1:4, 15mm thick on othe than fair faces of brick work or concrete surfaces all as specified and directed. Note : WPC shall be measured and paid separately
M & L prepation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over over a coat of primer all as specified and as directed directed by Engr-in-charge.
Supply only Intergral waterproofing compound
M & L for preparation of old plastered surfaces and applying two coats of white wash on ceiling.surface all as specified.
M & L for preparation of old treated wall surfaces and applying two coats of white wash all as specified.
M&L for grinding and Polishing of existing kota stone using carborundum stone GC 120 all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete and including 20mmthick screed bedding in CM 1:4.
M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete and including 15mm backing coat in CM 1:3
M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.
M&L for RCC type B1 1:2:4 (20mm graded aggregate)in slab supoorted on walls , beams, columns in floor, roofs, landings, balconies, canopies deck slabs and in shelves and the like all as specified and directed.
M&L for flat form work for fair finished surfaces to soffits of suspended slabs such as roof slabs , floor slabs, landings and similar work; not exceeding 200mm thick (horizantal or sloping) all as specified and directed.
Mild steel TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (anneled) not less than 0.9mm dia or securing with clips all as specified and directed.
M&L for 4mm veneered decorative plywood, grade I with decorative face veneers on both faces all as specified and directed.
S&F set of Nylon rollers mounted on MS fittings, top & bottom latches and suitable fitting for pushing of door , complete suitable for 4mm thick sliding ward robe all as specified and directed.
S & F Factory made solid PVC Moulded door shutter with wood EPS, 30mm thick , with 2,4, or 6 raised panel design with 2mm thick moulded prelaminated PVC Sheet on both faces supplying & fixing in the frame at site as per specification & drawing etc complete all as specified and as directed by Engineer-in-Charge.
S&F 30mm thick ,IInd class hard wood, glazed and skelton shutters ;open rebated and prepared to receive glass, gauze, etc.(without sash bars), edges of framing plain, chamfered or rounded; fitted with mitred beads for securing glass wtc; size of members as specified in SSR part-I section 8, clause 8.24(a).
Preparing surfaces of wood and wood based materials, steel and iron work , new or old , of any description and girth, not otherwise described, and treated with tar or coal tar black paint.
Preparing surfaces of wood and wood based materials, steel and iron work , new or old , treating small articles such as stop, covers gully gratings, hold fasts ends of posts, back of chowkats etc , area n exc 0.1 Sqm each and treated with tar or coal tar black paint.
M&L for cement concrete 1:2:4 type B1 using 20mm graded aggregate for fixing of hold fast, including finished to match with exiting surfaces all as specified and directed.
S&F IInd class hard wood,small fittings such as shaped door and window stops and like articles n exc 200 Cu cm each all as specified and directed.
S&F 75 mm long butt hinges, medium weight, cold rolled mild steel and all as specified and directed
S&F 50 mm long butt hinges, medium weight, cold rolled mild steel and all as specified and directed
S&F 150mm aluminium alloy , anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy all as specified and as directed.
S&F 100mm long Aluminium anodised barrel tower bolts of extruded section and all as specified and directed
S&F 100mm extruded aluminium alloy handles, fabricated type anodised as specified and directed
Supply only stainless steel wire cloth 00.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless stell wire staples.
S&F in repair only 4mm sheet glass, ordinary quality , n exc 0.5 sqm in each glass all as specified and directed.
S&F in repair 3 mm figured glass, ordinary quality , n exc 0.5 sqm in each glass all as specified and directed.
S&F in repair stainless steel wire cloth 00.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless stell wire staples.
M&L for applying one finishing coat of synthetic varnish over old decorated surfaces of wood including prepation of surface all as specified and directed.
3-layer PP-R (Polypropylene random copolymer) concealed pipes/un concealed pipes SDR 7.4(PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain and brass threaded poly propylene random fittings fixed complete to walls/ceilings or laid on floors of 16mm outer dia of pipe all as specified and as directed
Taking down & refixing PPR 15mm/16mm pipes
Taking down & Refixing PPR 20mm
S&F in repairs vitreous china squatting pan 'Orrisa' pattern, size 580x440 mm white with intergal foot rests ( excluding flushing cistern and flush pipe) complete all as r specified and as directed by Engineer-in-Charge.
S&F in repair Vitreous china bowl urinal flat back, size of 465 x355x265mm white (minimum) with grating and union for discharge pipe excluding flushing cistren, flush pipe and waste pipe and including 32mm PTMTwaste cupling all as specified and directed
S&F Urinal spreader, brass chromium plated all as specified and directed.
S&F in repairs two way Bib taps, brass chromium plated fancy type with cruch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore.
S&F in repairs chromium plated stop valves concealed type , cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed. 15 mm size.
M & L 110mm dia for PVC (SWR) multi floor trap of with grating including jointing with solvent cement etc complete,
S & F in repairs 110mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints fixed to wall with clamp complete all as specified and directed.
S&F 110mm radius PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.
S&F 110mm radius PVC (SWR) branch piece, single (single T) equal or unequal complete all as specified and directed.
S & F in repairs 75mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints fixed to wall with clamp complete all as specified and directed.
S&F 75mm radius PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.
S&F 75mm radius PVC (SWR) branch piece, single (single T) equal or unequal complete all as specified and directed.
Disconnecting existings PVC water tank 500 Ltr capacity , setting a side (or lowering if required) for repairs, claening, etc. and hoisting if required reconnecting and refixing in position. (Cleaning repairings, etc. measured sepaeately).
Cleaning and removing all scale and dirt etc, from PVC tank 500 ltr capacity and from mouths of circulating pipes, etc. complete.
Dismantling of PVC water tank 500 ltr capacity and removing to store
S&F moulded polyethylene 500 ltr water tank storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-charge.
S&F in repairs 25 mm Ball brass valves, high pressure, with polythene float and flynut cimplete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
M&L for cement concrete type B1 1:4:8 (20mm graded aggregate) in filling and mass concrete all as specified and directed.
M&L for 12mm Calcium silicate false ceiling made out of 1800 x1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and taping screws having phillips head with rubber head cutter at 20mm centre to centre , including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish (Frame work for ceiling shall be measured and paid separately.
M&L for IInd class hard wood plain fillets, square or traingular in section, sectional area exc 13 & n exc 25 sqcm, clean sawn, secured with nails or brads.
S&F 12mm plywood, grade BWR, type BB fixed with screws to timber frame work all as specified and directed.
S&F 1.5mm decorative laminate type I of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions
Dismantling battens for tiles, shingles etc, spaced at exc 15cm of any size incuding tilting fillets etc all as specified and directed.
Taking down and refixing in same opening of shutters of any description exc 1 sqm and n exc 2sqm each all as specified and directed.
Taking down shutters of any description exc 1 sqm and n exc 2sqm each all as specified and directed.
S&F IInd class hard wood, 35 mm thick Glazed and skeleton shutter, open rebated and prepared to receive glass , gauge, etc with sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.24 (a) and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge.
M&L 25 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded aggregate as in sub base of floors without extra cement all as specified.
M & L for 125mm thick Cement concrete 1:4:8 type D2, using 40mm graded stone aggregate as in sub base.
M&L for preparation of old surface and applying one coat of white wash on ceiling surface all as specified and directed .
M&L for Preparation of new plastered surfaces of walls and applying two coats with acrylic smooth exterior paint of approved shade over and including one coat of exterior primer all as specified and as directed by Engr-in-charge.
M & L preparation of old treated wall surfaces and applying one coat with acrylic smooth exterior paint of approved shade all as specified and as directed by Engr-in-charge.
Taking down chokhats or frames with shutters (without taking off the shutters from the frames) size exc 1.50 sqm but n exc 4 sqm all as specified and directed.
S & F Powder Coated (thickness of powder coating not less than 50 micron) aluminium frame for doors shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats glazing clips, rubber neoprene packing handles 2 Nos in each door, hinges anodised aluminium snap beading scews etc. complete all as specified
S & F Powder Coated (thickness of powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified
S&F steel tubing medium grade galvanised with all fitting and fixtures complete to walls and or laid in floors 15mm bore complete all as specified and directed.
S&F steel tubing medium grade galvanised with all fitting and fixtures complete to walls and or laid in floors 20mm bore complete all as specified and directed.
S&F Bib taps, brass chromium plated fancy type with cruch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore.
S & F towel rail 60cm long of brass chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms).
M&L hardcore with broken stone or boulders of gauge not exc 63 mm deposited spread and leveled in layers not exc 15 cm thick watered and rammed to a true surface .
Demoliltion of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
M & L for one or more coats of French polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surface
M&L 16 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work
M&L 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions
S&F Sheet glass, ordinary quality 8mm thick and glazing with oil putty or fixed with beads in square n.exc 0.5 sqm in each pane.
M & L Formwork to sides and soffits of floor or roof beams, beam haunching, girders bressummers, lintels, cantilevers, shelves incl supports, overhangs, etc also splays between floors and beams etc for fair finished surfaces
TMT bars 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
Material and labour for reinforced cement concrete 1:2:4 type B-1 (nominal mix) (using 20mm graded crushed stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed
Supply and fix Gyproc MF suspended ceiling board decorative type, which includes gypsteel ULTRA CRP surface ribbed perimeter channels (having one flange of 20 mm and another flange of 30 mm and a web of 27 mm ) along the perimeter of ceiling screw fixed to brick wall/ portion with the help of nylon sleeves and screws , at 610mm centres.Then suspending Gypsteel ULTRA CRP surface ribbed intermediate channels of size 45mm (with two flanges of 15mm each) from the soffit at 1220mm centres with Gypsteel ULTRA tm CRP surface ribbed ceiling angle of width 25mm x 10mm fixed to soffit with GI cleat and steel expansion fasteners (Manufactured by Saint Gobin Gyproc). Then Gypsteel ULTRA CRP surface ribbed Ceiling section of having web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the Gypsteel ULTRA intermediate channel with the help of connecting clip and in direction perpendicular to the Gypsteel intermediate tm channel at 457mm centres. Single layer of 12.5mm tapered edge Gypboard Plain (confirming to IS 2095 part 1 1996) is then screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally square and tapered edges of the boards are to be jointed and finished so as to have flush look which includes filling and finishing with Gyproc jointing compound, Gyproc joint paper tape. (as per recommended practices of Saint- Gobain Gyproc India) including Painting of Gypboard Ceiling/Partition/Walls with two coat of Readymade putty (Birla wall care) two coats of primer and two coats of EMULSION (Asian) with roller finish.
Taking down carefully the point wiring (light, Fan, socket or power) complete, (fittings such as switches, sockets any type, ceiling roses, pandents, light fittings, etc.to be measured seperately) removing materials for keeping in safe custody or for taking credit( credit for above items should be made as per conditions separately) and making good disturbed surface of walls floors etc. all as specified.
Taking down ceiling fan, sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces complete all as specified and as directed.
Taking down exhaust fan, sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces complete all as specified and as directed.
Hanging/Refixing only ceiling fan and connecting up including provision of cable from celling rose/ connector to fan all as specified and as directed.
Refixing only exhaust fan and connecting up including provision of cable from celling rose/ connector to fan all as specified and as directed.
M& L for painting of ceiling fan/ exhaust fan complete, in situ with synthetic enamal paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc all as specified and as directed.
M&L for concealed point wiring complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through and including 20mm dia PVC rigid non metallic conduit with all accessories such as internal bend end caps etc complete including pressed steel sunken boxes 2 mm thick concealed in walls including 3 mm thick phenolic laminated sheet cover and including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor connected with dolly, all as specified and as directed for the following :- Note: ( Cutting chases and making good in wall / floor will be Measured and paid seperately.
One light point controlled by one, one way switch.
One ceiling / exhaust fan point controlled by one, one way switch.
One 05 Amps socket outlet point on same board.
One 05 Amps socket outlet point on independent board.
All as per item No. 197 described here-in-before but with copper conductor cable FRLS, 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.
Note for item No. 197 and 202 : Cutting chases and making good in wall / floor will be Measured and paid seperately.
Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals.
S&F Switch piano, flush type single pole, one way 05 Amps complete all as specified and as directed.
S&F Switch piano, flush type single pole, one way 15 Amps complete all as specified and as directed.
S&F Socket outlet 3/5 pin, 06 Amps, flush type complete all as specified and as directed.
S&F multi socket outlet , 2 in 1, 3 pin, 16 Amps, flush type complete all as specified and as directed.
S&F step type,electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and as directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.Make-Havells/Bajaj/Crompton
Supply & fix universal regal LED batten with LED tube 1x20/22 watt surface mounting tube light fitting complete and making connection complete. Make: Havells Cat No.REGALBATTENT8UPTO1x22WSSBSWH with LED Tube rod Havells Cat No. CRYSTAL T81213SSTL20WLED865SGLASS or equivelent in crompton/ C&S
Supply & fix Lumiline Plus LED batten 1x10 watt surface mounting tube light fitting complete and making connection complete. Make: Havells Cat No.LUMILINPLUSBS10WLED865SPCWH or Equivelent in Philips, Crompton.
Supply and fix building security light 35 Watt, new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK08 complete including GI bracket made of suitable size medium frade GI pipe bent to shape. Make:Havells Cat No.ENDURASUNDOWNSL35WLED765PASYBOPC, or Equivelent in Philips, Crompton.
Taking down old unserviceable submain wiring of any size including GI/copper earth continuity conductor in PVC conduit on wall/roof and making good to disturbed surfaces all as directed.
M&L for concealed Sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etc including making recess and making good the disturbed surfaces to match with existing surfaces all as specified and as directed by engr - in- charge. Note :- 2 runs of 4 sqmm, 1 run of 4 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length
Supply and fix sheet metal enclosure with distribution board (DB) TPN, 415 volts, having IP:43 protection, isolated neutral bar, insulated busbar assembly, door earthing arrangement, mechanical impact strength IK08, 06 way compact double door suitable for fixing MCBs TPN as in commer and out going complete . Make: L&T/Legrand/ Havells
MCCB 3 Pole .415 V. fixed type, 25 to 100 Amps with breaking capacity 16 KA complete. Make: L&T/Legrand/ Havells.
Supply and fix MCB DB, SPN, 8 ways, Isolated neutral bar, IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK 09 complete.
Supply and fix MCB DB, SPN, 4 ways, Isolated neutral bar, IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete.
Supply and fix MCB SPN 40 Amps, 240Volts, 10 KA, "B" Curve complete. Make: L&T/Legrand/ Havells
Supply and fix MCB SP 6-32 Amps, 240Volts, 10 KA, "B" Curve complete. Make: L&T/Legrand/ Havells
M & L for cutting the wall for making opening for fixing the exhaust fan 300 /450 mm sweep including making the surface good by plastering and distempering to match the existing color as per site requirement and all as specified and directed by Engr-in-charge.
Supply & fix exhaust fan metallic body, heavy duty, single phase, 1400 RPM 230 volts, 300 mm sweepcomplete with & including louver Shutters complete. Make Crompton / Bajaj / Usha
Supply & fix exhaust fan metallic body, heavy duty, single phase, 1400 RPM 230 volts, 450 mm sweep complete with & including louver Shutters complete. Make Crompton or equivelent in Crompton Greaves, / Bajaj / Usha
M & L Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt , earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts, washers of galvanised iron, thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore medium grade GI pipe with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete 1:2:4 type B-1 & RCC cover in M-20 (Design mix ) and all as shown in Electrical Plate No. 3 of SSR ( Part-I) of 2009. (i) The unit rate includes earthing wire, and protection pipe upto 7.5 metre.
M&L for 4 mm dia galvanised iron or steel wire as earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required complete.
Disconnecting carefully electric energy meter single phase and keeping aside , and re-fixing the same after necessary wiring work complete.
Disconnecting carefully old unserviceable distribution boards any sizes including MCBs complete and making good the disturbed surface of wall.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth
M& L for making opening for fixing of exhaust fan of size 250 mm sweep complete and making good the disturbed surface complete.
All as per item No. 197 described here-in-before but with copper conductor cable FRLS, 4.00 Sqmm for one 3 pin socket outlet, 15 Amps and including 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.
Note for item No. 197 & 231 : Cutting chases and making good in wall / floor will be Measured and paid seperately.
Supply & fix Ultra Slim 1' x1' ultra modern designed architectural 15 watt LED luminaire which provides soft-light and glare free symmetrical illumination suitable for false ceiling complete with and including making connections by using twin core flexible twisted copper cable from ceiling rose to light fitting complete all as specified and directed. Make: Havells Cat part No PLUTO1X1PLR15WLED840S or equivelent in Bajaj, crompton .
Supply & fix LED light fitting suitable for mounting with false ceiling cut out as required , 28 watt board panel 2 ft x 2 ft complete with connection by using connector and twin core flexible twisted copper wire from connector to light fitting complete. Make: Havells Cat Part No PLUTONE02X2PLR28WLED840S or equivelent in Bajaj, Philips.
Supply and fix building security light 30 Watt, new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK07 complete with and including GI bracket made of suitable size medeium grade GI pipe bent to shape and fixed complete all as specified. Make: Havells Cat Part No - ENDURASUNDOWNSL30WLED757PASYBOPC OR Equivelent in Bajaj, Crompton .
Supply & fix exhaust fan 250 mm sweep Plastic body complete with louvrs, single phase 230 volts, 50 Hz, white colour, complete. Make : Crompton /Bajaj/Havells
S&F Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDCincluding necessary connection wire of three core twisted copper cable flexible from ceiling rose to ceiling fan complete. Make: Crompton/Bajaj/Havells
S&F Wall mounted fan 400 mm sweep , high speed, single phase , 230 volts, 50 Hz complete. Make: Crompton Model- HighFlo Wave Plus 400-MM or equivalent in Havells/Bajaj.
S&F single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB 20 Amps.
Supply and fix MCB TPN 63 Amps, 240Volts, 10 KA, "C" Curve complete. Make: L&T / Havells/ Legrand
Supply and fix MCB TP 25 Amps, 240Volts, 10 KA, "C" Curve complete. Make: L&T / Havells/ Legrand
S&F Modular fan regulator step type 120 W, 2 module complete all as specified and as directed.
S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed.
S&F Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed.
S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.
S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.
S&F lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete.
S&F LED lamp 15 Watt complete. Make-Havells or equivalent
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.Make-Havells/Bajaj/Crompton
M&L for concealed Sub main wiring by making recess in wall/surface complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc for three phase sockets all as specified and as directed by engr - in- charge. Note :- 2 runs of 6 sqmm, + 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length.
M & L Non skid coloured ceramic floor tiles 7 to 8mm thick (Square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface.
S & F powder coated aluminim sections for frames of ventilator / Sliding cupboard secion
S & F Powder coated (thickness of powder coating not less than 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.
Taking down shutters of any description not exc 1 sqm each all as specified and directed.
R K BUILDERS
Lucky Enterprises
KUMAR AGENCIES
A.GOVINDARAJ
p.chinnasamy
D NAGI REDDY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .