8526 PROVISION OF CERTAIN MINOR WORKS AND CERTAIN REVENUE WORKS UNDER AGE B/R-II AND AGE E/M AT AIPT AND OLD NDA COMPLEX UNDER GE (CENTRAL) PUNE

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in charge

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each with and including including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc 1.50 Sqm but not exc 4 Sqm each with and including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and as directed.

S&F aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S&F anodised powder coated aluminium door shutters (single / double leaf) or partitions, aluminium section weighing 0.55kg/m including necessary joining cleats, al powder coated glazing clips, rubber neoprene packing, Al powder coated handles 2 Nos in each door, Al powder coated tower bolt 02 Nos, hinges 03 Nos, Al powder coated snap beading, screws, door stopper 01 No etc. complete all as specified

S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 146 of SSR 2004 part II. The width of stiles and rails shall be as specified in para 8B.2.1 on page 134 of SSR 2004 part 11. complete all as specified and directed.

S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 150 of SSR 2004 Part 11 complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles fabricated type complete all as specified and directed

S & F Aluminium anodised barrel tower bolt of extruded section 200mm long all as specified and directed

S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 300mm size all as specified and directed complete

S&F stainless steel butt hinges 100mm, medium weight complete

S&F anodised powder coated ventiator with louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M complete all as specified and as directed

S&F sheet glass 4mm thick of best quality and glazing with clip all as directed and specified by Engr in charge complete

Supply only 4.80mm thick tinted glass sheet and glazing fixed to aluminium window / doors etc complete all as specified and directed

Supply only stainless steel wire 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to aluminium window / ventilator shutters / steel windows etc complete all as specified and directed

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc.

M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) un-reinforced cleaning the premises and removal of rubbish out side the MD land at the location notified complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 75mm thick (1:3:6) Type-C2 (using 40mm graded crushed stone aggregate) as in levelling course / sub base of flooring & plinth protection complete all as specified and directed.

S & F vitrified tiles ,size of tile 600 x 600 mm and 8 to 10 mm thick sqm, in floor etc.,set and jointed in neat cement slurry over 20mm thick screed bed in CM 1:4 and pointed in white or coloured cement with pigment to match for laying floor fineshes all as specified .

M&L for coloured glazed ceramic tiles in vertical surface, size of tile 300 X 600 X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat of CM 1:3 complete all as specified.

M&L for coloured non-skid tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 complete all specified.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces including finishing even and smooth without using extra cement all as specified and as directed by Engineer in Charge.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without using extra cement all as specified and as directed by Engineer in Charge.

M&L for preparation newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer of same make over external wall surfaces complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make over 2mm thick wall care putty complete all as specified and directed.

Complete removal off existing treatment, M&L for applying thin layer of wall care putty and applying two coats of oil bound distemper on walls all as specified and directed.

M&L for 8 mm thick one side laminated gypsum ceiling board for false ceiling of size 600 x600x mm on GI powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 2-3 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, complete all as directed and specified

Dismantling of single layer manglore pattern tiles and ridge in roofing /AC sheet/GI Sheet roofing complete all as specified and directed.

Dismantling of battens for tiles, shingles etc, of any size and description spaced exc 15cm including tilting fillets complete all as specified and as directed.

Dismantling timber scantling of size 10 Sqcm and over in section as in unframed work complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick AZ-150 of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick AZ-150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, bent to shape as required and directed fixed with self tapping screws as specified and directed

M&L for MS structural steel work framed as in trusses, purlins,rafters post etc conforming to grade E-250 (Fe-410W quality "A") including shaped washers including necessary clits required length,notching,drilling ,reveting and or welding of connecting with nut bolts with angle ,cleat,fish plat,gusset plate and also erecting in true position complete all as specified and directed.

Taking up or down 15mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls & surface of roof slab with and including making good to required surfaces by using white cement complete all as specified and directed.

S&F 20 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed.

S&F rotional molded polythylene water storage tank 1000 ltr capacity (Cylinderical vertical with closed top) with tank nipple 20mm bore hoisted and fixed in position complete all as specified

S&F 20mm bore ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as directed

S&F 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete

Supply and fixed in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

S&F in repair Bib cock , CP brass complete all as specified and directed by Engr in charge. :Make Jaquar cat part no:FLR-5047N or equivalent techno commercial model in KOHLER and ROCA.

S&F Stop cock of size 15mm dia fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by engineer-in-charge. Make : Jaquar Cat part No FLR-CHR-5083NK or equivalent techno commercial model in kohler and ROCA.

S&F 15mm bore chromium plated angle cock fancy typeMake Jaquar cat part no:FLR-5053N or equivalent model in KOHLER and ROCA.

S&F 15mm bore chromium plated pillar cock fancy type. Make Jaquar cat part no:FLR-5015 or equivalent model in KOHLER and ROCA.

S&F brass chromium plated shower rose 125mm size fitted to steel pipe or union complete. Make Jaquar cat part no:OHS-1989 or equivalent model in KOHLER and ROCA.

S&F vitreous china pedestal pattern, white with including cast iron 'P' or 'S' trap and connection to trap includintg cement concrete, with and including PVC valveless, syphonic action type flushing cistern, low level, white wit inlet,m ball valve, float and handle in cluding brackets and including flush pipe of polyethylene or low or high density or PVC 32mm dia, for low level cistern, seat cover and jet spray etc. including making good to floor, complete all as specified. Make Jaquar cat part no:CNS-WHT-851 or equivalent model in KOHLER and ROCA.

S&F vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete

S&F urinal spreader of brass chromium plated any colour for fixing with 15 mm dia pipe complete

S&F Vitreous china urinal partition white of size 310x700 mm complete

S&F vitreous china flat back type wash basin, white of size 550 x 400 mm including brackets and following items :-

S/F brass chromium plated waste coupling 32mm dia for urinal and wash hand basin etc complete

S&F PVC connection 15 x 450mm complete all as specified and directed.

S/F PVC waste pipe for 32 mm dia complete all as specified and directed.

S&F Kitchen rack (Overall size 24x24x10”) complete all as specified and directed. Make : Cat No. P-310 of Prayag / Blue Star / Nirali

S&F in repair grating doom with hole100mm dia of PTMT (Minimum weight 25gms)

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

.ditto- but 75mm bore

S&F 110mm PVC (SWR) bands

S&F 75mm PVC (SWR)bands

S&F PVC(SWR) Nahani trap 75mm bore with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed.

S&F PVC (SWR) gully trap 150x100 square or round mouth,type P incl jointing to waste pipe fixed in cement cncrete type B1 (1:2:4) complete all as directed

S&F 110mm bore PVC (SWR) junction double,(double T).equal or unequal with access door complete.

S&F PVC (SWR) Coupler 75/110mm dia bore complete.

Demolition of brick work or stone/boulder/ PCC block masonary built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and precast PCC block including rubbish off outside of MOD land complete all as specified and as directed.

M&L for precast concrete solid block masonry exc 10cm width with solid block of PCC (1:5:8) Gde C-5 and setting in CM 1:6 complete all as specified and directed.

S&F Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed (Al die cast body) .

S&F in 18/19 mm thick MDF board with two sides decorative choice lamination fixed with screws as in cup board shutters & shelves and pelmet boxes etc all as directed.

S&F 100 mm long,designer pattern ss handles for fixing in cupboards all as directed and as specified by Engr-in Charge

S&F ,Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed

S&F telescopic drawer channel 19" long complete all as specified and directed by Engr in charge

S&F contineous (piano) hinges, mild steel bright finish of 40 mm width of flaps(when open) complete all as specified.

S&F Locks, drawer, grade I, size 50 mm complete all as specified and directed.

M&L 20mm thick granite (of any type) work table rubbed and pre polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite complete and ensure best adhesion to surface complete

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

M&L for machine cut cudappah stone slab 20-25mm thick for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as directed and specified

Excavating in post holes (or similar holes) each n-exc 0.50cum and getting out in hard / dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer not exc 25cm, watering, and removing surplus soil to a distance nexc 50m and making good surface

Removal excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete

M & L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate in foundation/filling and mass concrete as in post holes complete.

M&L for preparation newly plastered surfaces of wall and applying three coats of white wash complete all as specified

Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard dense soil complete

-ditto- as above but exc 1.5m and not exc 3.0 m and getting out in soft / disintegrated rock complete

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm

M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregates) as in foundations, filling and mass-concrete complete

M&L for TMT bar 10mm dia over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified and directed.

Ditto as above item no- 91 but 8 to 10mm dia as in stirrups complete

M&L for cement concrete type B1 1:2:4 (using 20mm graded stone aggregates) in precast cover slabs for manholes cover and similar articles with plain faces etc set in cement mortar 1:4 including use and waste of formwork complete

M&L for 15mm thick rendering in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Ditto All as above but 10mm thick in CM 1:3 as in ceiling finished even and smooth using extra cement complete.

M&L provinding cement concrete (1:2:4) B-1 as in copings / bearing course over brick walls etc and like complete all as specified.

M&L for cement concrete 1:3:6 type C2 (40mm graded stone aggregates) as in surface channels and drains complete

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete

M&L for PCC 1:3:6 type C2 using 40mm graded agg as in bed to drain pipes including packing under and aunching against the sides of pipes after are laid and tested in for 200mm dia of pipe.

All as above but for 150mm dia pipe complete all as specified and directed.

M&L for 200 mm bore reinforced concrete pipes, class NP2, laid and jointed complete with colars laid in trenches and jointed as specified complete

Cutting into existing manholes for connecting new drains of dia 300 mm making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, for the following size of pipe :-

M&L for rubber moulded glossy chequered cement concrete coloured tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including welding etc all as spfd and directed by EIC.Fe-410-W(gde-E-250) quality B.

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft / loose soil complete

Use and waste for formwork to rough finished flat surfaces of soffits of suspended slabs such as roof slabs, floor slabs and landing and similar works complete

Use and waste for formwork to rough finished sides of concrete foundation, footings, base of columns, plinth beam etc and similar work complete all are as specified and directed.

Use and waste for formwork to rough finished flat edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding not exc 20cm wide complete

Use and wastefor formwork to rough finished flat surfaces of pillars, posts, struts, piers, columns and stanchions etc complete all are as specified and directed.

M&L for reinforced cement concrete nominal mix type B-1 1:2:4 (using 20mm graded aggregate) for slabs supported on walls, landings and kerbs and like etc complete

M&L for reinforced cement concrete nominal mix M-25 (using 20mm graded aggregate) for foundations, including rafts, footings, plinth beams, bases for columns, etc complete

M&L for reinforced cement concrete nominal mix M-25 (using 20mm graded aggregate) for columns, pillars, piers, posts and struts etc complete

M&L for reinforced cement concrete nomainal mix M-25 (using 20mm graded aggregate) for roof beams and lintels complete

Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all are as specified and directed.

M&L excavating over areas, n exc 1.5 m deep and getting out in soft / loose soil complete

Removing excavated material exc 1.50 Km but not exc 5.0 Km and directed

M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete

M&L for 100mm thick PCC 1:2:4 type B1 (using 20mm graded coarse stone aggregates) as in floor toppong laid in alternate bays and spike rolling to surfaces or making impressions of expanded matal whilst the concrete is green complete all are as specified and directed by engineer-in-charge.

M&L for forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with epoxy based polymeric sealing compound complete

M&L for point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked duly drawn through PVC conduit concealed in wall / floor and fixing to iron channels on roof along with suitable fittings and conduits of appropriate size as per specification as required at site and as directed of medium duty ISI marked including all accessories etc. with MS termination boxes as required at site and as directed including modular frame/cover plate suitable for mounting switches/sockets etc. ISI marked and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following:- Note:- (1) The quoted rate shall include cutting chasing in wall ,and making good disturbed surfaces of walls, floors, etc will be done by contractor without any extra claims.

(a) One light point controlled by one switch complete all as specified and directed.

(b) One Exhaust / fan point controlled by one 5 Amps one way modular switch complete all as specified and directed.

(c) One 5/6 Amp socket controlled by one switch same board complete all as specified.

(d) One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified

All as per item no. 120 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed multistranded FRLS H cable 1100 volts grade, ISI - 694 marked, including PVC insulated multistranded copper conductor 2.5 Sqmm single core cable for earth continuity conductor for one 3 pin 5/15 Amps switch socket / Earth plug socket independent and connecting to common earth dolly complete all as specified

S&F modular switch single pole one way 5/6 Amps including connection complete all as specified and as directed

S&F socket out let 5/ 6 Amps 2/3 pin modular type incl connection complete all as specified and as directed

S&F of modular socket 2 in 1, 5 pin 16 Amps type incl connection complete all as specified and as directed

S&F modular switch single pole one way 15/16 amps incl connection complete all as specified and as directed

S&F ceiling rose, surface, three terminals incl connection complete all as specified and as directed.

Supply and fix bell push modular type 6A complete all as specified and directed

S & F Modular type stepped electronic fan regulator 2 module all as specified & directed

Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, IP 65/66 including suitable bracket complete with fitting all as specified and direcred.

Supply and fixing in repair LED tube lights 4 feet fitting 1x 20W, 220V, AC aluminium housing connecting up with flexible copper conductor cable of suitable size from ceilingrose complete. Cat Part No LHEXARP75NIW020 of Make : Havells or equivalent techno commercial complete all as specified and directed

Supply and fixing LED light fitting 2 feet, 10 watt 220 V AC including connecting up with flexible copper conductor cable of suitable size complete

S&F of MCB SPN DB 8 way with 100A bus bar, neutral link, earth bar and Din rail ,230 Volts with double door including taking down old unsv DB with MCBs and making the the surface good to match with adjucent complete all as specified and as directed

Supply and fixing 240V, 10KA C curve miniature circuit breaker (MCB) of SP 6 To 32 AMP poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

S & F MCB double pole of rated capacity 40 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete including cutting of wall if necessary to fit the fan as specified and directed

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm

Supply, install, Testing and Commissioning Electric water heater storage type (Geysers) Shock resistant ABS outer body, steel / glass lined inner tank PUF insulated and efficient long life copper heating element, white colour, tank design is suitable to withstand min 6 bar pressure and of capacity 25Liter, BEE 5 star rated complete with all accessories such as safety valve, thermostat, Heating element, NRV etc complete all as specified and directed . Note : the quoted rate shall include hot and cold stainless steel pipes for connection.

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl galvanised iron wire 4mm as earthing lead and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc as existing surface.

Taking down of old U/s switch board with switches and socketes complete, supply and fix modular PVC box with white cover plate of 2 module with internal wiring connections to switches , sockets etc complete all as specified

Taking down of old U/s switch board with switches and socketes complete, supply and fix modular PVC box with white cover plate of 3 module with internal wiring connections to switches , sockets etc complete all as specified

Taking down of old U/s switch board with switches and socketes complete, supply and fix modular PVC box with white cover plate of 4 module with internal wiring connections to switches , sockets etc complete all as specified

Taking down of old U/s switch board with switches and socketes complete, supply and fix modular PVC box with white cover plate of 6 module with internal wiring connections to switches , sockets etc complete all as specified

Taking down of old U/s switch board with switches and socketes complete, supply and fix modular PVC box with white cover plate of 12 module with internal wiring connections to switches , sockets etc complete all as specified

Supply and fix Dbox MCB protected socket and plug with MCB of 20A rating complete with enclosure complete all as specified and directed. Make Havells :

M&L for laying of RCC pipe lines of dia 150mm class NP2 with one collar per length of pipe, laid in trenches and jointed as specified.

Supply and fixing with clamps on wall /laying XLPE insulated armoured heavy duty electrical cable with aluminium conductor 1100V grade 10sqmmX2 core complete laying/ fixing on wall/iron channel with clamps complete all as specified and directed.

Supply and fixing 240V, 10KA C curve miniature circuit breaker (MCB) of SPN 32 AMP poles and current carrying capacity in the existing panel with complete wiring connection

Supply and fix/lay GI pipe of size 20mm medium grade complete all as specified and directed.

UNIQUE ENGINEERS (BID ID -3119733)

M/S NAVNEET S MORDE (BID ID -3103920)

L.T Associate (BID ID -3104336)

DURGA CONSTRUCTION & TRANSPORT (BID ID -3104748)