Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.7 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹36.9 L+₹2.9 L (8.43%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹37.1 L+₹3.1 L (9.09%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹38.7 L+₹4.7 L (13.7%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹40.0 L+₹5.9 L (17.4%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹48.9 L
EMD Value
₹97,800
Closing Date
22 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
COMPREHENSIVE BR MAINTENANCE WORKS OF MH BHOPAL 21 CGSR 755 I TPT ASC SUPPLY DEPOT CTO COLONY AT BAIRAGARH AREA UNDER GE BHOPAL
2023_MES_598384_1
8992/E8
Open Tender
Civil Works
Item Rate
183 days
BHOPAL
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹97,800
Yes
29 Aug 2023
25 May 2023
24 Jun 2023
25 May 2023
22 Jun 2023
10 Jun 2023
Amount
Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline
Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water of any description complete all as specified and directed.
M&L for rendering 20mm thick on faces of brick or concrete surfaces (external surfaces) shall be done in two coats comprising cement and sand mortar (1:4) 5 mm thick mixed with water proofing compound @ 3% by weight of cement over a backing coat of cement and sand mortar (1:4) 15mm thick and finished with trowel to an even and smooth surface without using any extra cement complete all as specified and directed. Note:- (a) Water Proofing compound shall be measured and paid seperately. (b) Rate is inclusive of scaffolding upto height of 12m.
Supply only Integral water profing compound (ISI marked) complete all as specified and directed. Make:- M/s Pidilite Industries/ Dr. Fixit/ M/s Fosroc Chemical
Dismentling structural steel work including purlins, rafters, tursses, etc. complete all as specified and directed.
S&F of mild steel work in tubular/angle trusses including special shaped washers, purlins, rafters, posts etc complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as specified and directed.
M&L for pre galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensil strength of 550/MPA as in roof covering/ cladding to wall/ ridge, fixed with self tapping screw/L type or J type cranked hook bolts complete all as specified and directed. Make:- JSW/Metco Roof Pvt Ltd or equivalent as approved by GE.
M&L for applying heritage/texture finish of approved design/ colour over cement plaster on wall and finished complete all as specfied and directed. Note:- Heritage/texture finish shall be comprising of preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed or as per manufacturer instructions. Make: Asian/ Berger/ Nerolac
M&L for dampness rectification in toilet area/ corridor area by filling tile joints with epoxy grout after clearing all tile joints with grinder and removing existing cement grout, cleaning the surface to remove all foreign material and applying masking tape around to joints filling tile joints with epoxy grout removing the tape & cleaning tiles with thinner/acid to make it stain free complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed.
M&L for non skid ceramic dark coloured tiles 7mm to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeing 0.18 sqm as in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed. Make: Somany/ Kajaria/ Johnson
M&L for glazed ceramic light coloured tiles, 300x450x6 to 7mm thick as in skirting/ dado over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles complete all as specified and directed. Make: Somany/ Kajaria/ Johnson
M&L for water proofing treatment to sunken surfaces of slab in following sequence complete:- (a) Slope correction providing PCC 1:1.5:3 (using mixed graded stone aggregate) of average thickness 25mm, mixed with integral water proffing compound "DITCHTMENT DM' manufactured by Dr fixit Pidiproof LW + of M/s Pidilite Industries or STP No 1 (Liquid) of M/S STP Ltd as approved, in proportions as suggested by manufacturer. (b) Applying evenly a priming coat of bituminous primer confirming to IS 3384 @ 0.7 Kg per Sqm on prepared surfaces. (c) Applying evenly a coat of hot blown bitumen of grade 85/25 @ 1.5 Kg per Sqm on the primer surfaces. (d) Laying 150 micron thick black polythence film on the suface with 10mm overlaps, sealed and bounded the surface. (e) Applying evenly a coat of hot bown of grade 85/25 @ 1.5 kg per sqm on the surfaces. (f) 48 hrs testing of treatment for water thightness by ponding of water.
M&L for dampness rectification on wall area:- (a) Surface Preparation: Removing existing putty/plaster/POP surface from the affected area of walls with wire brush/grinder/hammer etc up to brick level. (b) Coating: Applying two coats of Dr Fixit Pidifin 2k or equivalent (two component, anti-fungal, acrylic water proofing coating) after cleaning surface with brush and allowing it to dry for 24 hours. (c) Finishing the surface: Applying plaster and putty over the treated surface with waterproofing compound mixed with putty & plaster to provide proper finish after proper curing.
Taking up or down 15mm bore GI steel tubing and connections complete all as specified and directed.
S&F of 15mm GI tubing medium grade with all necessary fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed.
Taking up or down 20 mm bore GI steel tubing and connections complete all as specified and directed.
S&F of 20 mm GI tubing medium grade with all necessary fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed.
Cutting chases, pinning in, making good to facings in brick wall where required and pointing in cement mortar 1:3 to ends cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting exc 20 cm girth complete all as specified and directed.
M&L for 15mm thick rendering on brick or concrete surfaces in CM 1:6 finishing the surface fair and even without using extra cement complete all as specified and directed.
M&L for 10mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for vitrified ceramic tile light shade 7-8 mm thick (square /rectangular) polished, area of each tile not exceeding 0.36 Sqm as in floors/skirting over and including 20mm thick screed bed in CM 1:6 etc and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed. Make: Somany/ Kajaria/ Johnson
M&L for vitrified ceramic tile light shade 7-8mm thick (square /rectangular ) polished area of each tile not exceeding 0.36 sqm on vertical surfaces such as skirting, dado and risers to steps etc over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Make: Somany/ Kajaria/ Johnson
M&L for granite 16-18 mm thick (of any type) work (machine cut) in steps, jambs, pillar, window-cills, cooking platform and like over and including screed bed 15 mm thick in cement mortar (1:4) including pointing in white cement in ratio 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for rounding one edge of stone work as in steps, cooking platform and other similar situation complete all as specified and directed.
M&L for machine cut kota stone slab flooring 18-20 mm thick over and including 20mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.
All as per item No.26.00 here in before but in skirting or similar work over and including 15mm thick rendering in cement mortar 1:4.
Taking up or down 25 mm steel tubing and connections complete all as specified and directed.
S&F of GI tubing medium grade 25 mm bore with all fitting and fixed to wall and ceiling or laid in floor complete all as specified and directed.
S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laborary with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantileer brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm complete all as specified and directed.
S&F in repairs 15 mm bore pillar taps, fancy type, cast copper alloy, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs 15 mm bore bib taps, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F of 15 mm bore stop valves, cast copper alloy, chromium plated screwed down high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repairs 15mm bore stop cock, cast copper alloy chromium plated with long shank and cup (concealed type) screwed down, screwed for iron pipe or union and fixed complete as specified and as directed.
S&F in repairs 15 mm pillar taps, fancy type, cast copper alloy, chromium plated with extended lever handle and wall flange elbow operated system and fixed complete all as specified and directed.
S&F in repairs 15 mm bib taps, fancy type, cast copper alloy, chromium plated with extended lever handle and wall flange elbow operated system and fixed complete all as specified and directed.
S&F in repairs brass chromium plated shower rose 125mm in size with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.
S&F in repairs 20mm dia (curtain rail) mild steel chromium plated fancy type with fancy type brackets, stops, rollers etc and fixed complete all as specified and directed.
M&L for 18 mm thick block board, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces and fixed with screws complete all as specified and directed.
Taking down chowkhats or frame with shutters n.exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
M&L for providing and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (one vertical length in each shutters) (45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, hardware [touch lock of zinc alloyed (white powder coated) steel roller system]. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. Note: (a) The unit rate quoted by contractor are inclusive of all connected accessories except sheet glass. (b) Net opening will be measured for payment purpose area n exc 2.00 Sqm each. (Make: NCLVEKA/DUROPLAST/PROMINANCE)
M&L for providing and fixing factory made uPVC two track sliding frame of size 60 x 62 mm of white colour casement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, complete all as specified and directed. Note: (a) Sheet glass, hardware hinges and fitting shall be measured and paid separately. (b) Each member of window to be measured separately with clear length. (Make - NCLVEKA/DUROPLAST/PROMINANCE)
M&L for mild steel framed work such as grills, gratings, gate etc with ends of bars souldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.
S&F of 5.5 mm thick frosted glass and uPVC beading including rubber packing, fixing glass to uPVC surrounds complete all as specified and directed.
S&F of stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to uPVC door with beading complete all as specified and directed.
S&F of 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed.
S&F of 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in pane complete all as specified and directed.
S&F of steel ventilator with top hung shutters including hinges with fixed type MS handles, peg stay and tower bolt but with additional sash bars MS flats for fixing of wire gauge complete all as specified and directed.
S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed and with stainless steel wire staples fixed complete all as specified and directed.
Taking down door shutter any description exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified and directed.
Taking down chowkhats or frame with shutters exc 1.5 Sqm but not exc. 4.00 Sqm each without taking off shutters from the frame complete all as specified and directed.
M&L for 30 mm thick flush shutters factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides and both face is covered with decorative face veneer with lipping/ frame to match complete all as specified and directed. Make: Goel Brothers, Raipur/ Pineer Timber, Chandigarh/ Goyal Industries/ Jain Doors/ Century Doors
S&F of factory made 2nd class wood 30mm thick glazed and skelton shutter, open rebeted and prepared to receive glass, gauge etc (with sash bar) edges of framing plain champhered or rounded fitted with cut and mitred beads for securing glass complete all as specified and directed. Make: Goel Brothers, Raipur/ Pineer Timber, Chandigarh/ Goyal Industries/ Jain Doors/ Century Doors
S&F of 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc made out of 1.25mm thick MS sheet complete all as specified and directed.
S&F of 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc made out of 1.25mm thick MS sheet complete all as specified and directed.
M&L for factory made single extruded WPC (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with mild steel hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- (a) M.S. hold fast/ lugs or SS dash fasteners shall be paid separately. (b) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Make: M/s Rajshri Plastiwood, Indore/ Sintex Industries Ltd/ M/s Duroplast Extrusion
M&L for factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge) minimum compressive strength 50 N/Sqmm, modules of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Make: M/s Rajshri Plastiwood, Indore/ Sintex Industries Ltd/ M/s Duroplast Extrusion
S&F of 100 mm but hinges, extruded stainless steel hinges pin, anodised and fixed type B-21 complete all as specified and directed.
S&F of 150 mm stainless steel handles, cast type, anodised complete all as specified and directed.
S&F of 150 mm stainless steel barrel tower bolts extruded section and fixed complete all as specified and directed.
S&F of 200 mm stainless steel barrel tower bolts extruded section and fixed complete all as specified and directed.
S&F of 300 mm stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F in repairs brass mortice latch 4 levers vertical type size 100mm complete all as specified and directed.
M&L for preparatration of new surfaces of walls including brooming, scraping down all smoke spot, moulds, moss, effloresecent salts trading oil, greasy spots and stopping nails marks and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.
M&L for applying 2mm thick or more coats of white wall putty on walls for fair and smooth surfaces complete all as specified and directed.
M&L for preparation of old decorated surfaces of wall and applying a coat of oil emulsion distemper complete all as specified and directed. Note: Required scafolding is included in quoted rates for painting at any height. Make: Asian(Royal)/ Berger(Bison) or as approved by GE.
M&L for preparing old decorated plastered or unplastered surfaces of walls and applying one coat of exterior acrylic emulsion paint, white or tinted complete all as specified and directed. Note: Required scafolding is included in unit rate quoted for painting at any height. Make: Asian(Apexl)/ Berger(Weathercoat) or equivalent as approved by GE.
M&L for Waterproofing treatment of terrace/ roof surfaces complete all as specified and directed with following specifications:- (a) Surface preparation by thoroughly by cleaning, washing and removing dust, dirt, oil, grease and loose particles. Ensure the roof slope is minimum of 1 in 100 to enable water run off. (b) Surface crack shall be filled with Dr Fixit crack X or polymer modified mortar in case of wider cracks. Bitumen based waterproofing treatment must be completely removed by mechanical scarification or by any other effective mechanical means. (c) Applying self primer with a coat of Dr Fixit roof seal top coat (diluted with water in the ratio 2:1) at the rate of 100-110 sq ft/ lit . Allow it to dry for 23 hrs. (d) Providing and applying two coats of Dr fixit roof seal top coat over self primed surface by roof seal top coat (2:1) embedded with a glass fibre mesh (2mmx2mm- 40 gsm) between the first and second coat as reinforecement to strengthen the coating. (e) Work will be done through authorised applicator.
M&L for complete removal of existing treatment of external surfaces of wall/ chajja/ roof projection including removing fungus/algea by wire brush and applying three coats of Shalimar Acrylic water proof coating, "Shalicryl 215" (UV resistant, elastomeric exterior water proof coating of premium quality) manufactured by STP Ltd. to use, first coat as a primer coat water be added in the ratio 1:3 (1 part shalicryl 215 & 3 parts of water) and in subsequent coats 10% water shall be addded to make it to a brushable consistency all as per manufacturers instructions including scaffolding complete all as specified and directed. Note:- The tint of the coating should match with the existing surfaces and as directed. Make: Shalicryl 215 manufactured by STP Ltd or equivalent product manufactured by Dr. Fixit/Chemistik.
M&L for preparing old decorated plastered or unplastered surfaces of walls and applying one coat of cement base paint, white or tinted complete all as specified and directed. Note:- Required scafolding is included in unit rate quoted for painting at any height.
M&L for preparatration of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old painted steel and iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.
M&L for preparatration of old decorated surfaces of wall and applying two coat of anti bactorial, anti fungus paint complete all as specified and directed. Make: Asian/ Berger or as approved by GE.
M&L for preparation of newly wooden surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
S&F of 25 mm bore of ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe weight not less then for 15mm bore -142grms complete all as specified and directed.
S&F in repairs gate valve of 25 mm bore with iron wheel, screwed both ends for iron pipes complete all as specified and directed.
M&L for 32 mm dia uPVC pipe as in water spout at the lowest point of sunken floor with 600 mm projection beyond the outer face of the wall with outer end cut in chamfered angle for easy drain of water complete all as specified and directed.
S&F in repairs 32mm bore PVC waste pipe for kitchen sink /WHB one mtr long complete all as specified and directed.
S&F in repairs 40 mm bore PVC waste pipe for kitchen sink /WHB one mtr long complete all as specified and directed.
S&F in repairs 100mm dia CP grating (minimum weight 25gms) complete all as specified and directed.
S&F in repairs PVC connection 15mm size PTMT nuts of length 600mm complete all as specified and directed.
S&F in repairs vitreous china squanting pan "Orissa" pattern size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) including cement concrete bedding complete all as specified and directed.
S&F of vitreous china oval shaped cunter top wash basin, white, flat back, size 550x400mm / std size including waste pipe, coupling, PVC pipe connection of 15mm dia, 600mm long complete all as specified and directed.
S&F of china wash down water closet pan (pedestal pattern), white, pedestal pan and 'P' or 'S' trap, plastic water closet seat, white, closed pattern with flat bottom with seat cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repairs vitreous china wash basin, white, flat back, size 630x450mm including brackets, waste pipe, coupling, PVC pipe connection of 15mm dia 600mm long complete all as specified and directed.
S&F in repairs PVC low level flushing cistern 10 liters capacity ISI marked white with all fitting and fixtures including brackets, PVC connection of 450mm long and 32 mm bore PVC flush pipe complete all as specified and directed.
S&F in repairs health faucets CP with 1.2mtr long CP flexible pipe complete all as specified and directed.
S&F in repairs jet spray (butterfly) with 1 mtr tube complete all as specified and directed.
S&F in repairs toilet paper holder of mild steel chromium plated, fixed to walls with chromium plated brass screws complete all as specified and directed. (Make- Prayag, Jaguar/CERA)
S&F in repairs EWC seat cover white/coloured plastic with fixing bolts & hinging device ISI marked complete all as specified and directed. Make: Commander/Parryware/Cera
S&F of PVC(SWR) pipe 75mm bore single socket, in any length with rubber ring joints, fixed in walls/ laid in trenches/floors complete all as specified and directed.
S&F of PVC (SWR) 75mm bore bends of any radious complete all as specified and directed.
S&F of PVC(SWR) junction single, (SingleT) 75mm bore equal or unequal complete all as specified and directed.
S&F of PVC (SWR) junction single, (DoubleT) 75mm bore equal or unequal complete all as specified and directed.
S&F in repairs PVC(SWR) pipes 110mm dia single socketed, in any length with rubber ring joints laid in trenches, floors or fixed in walls complete all as specified and directed.
S&F of PVC(SWR) 110mm bore bends any radious complete all as specified and directed.
S&F of PVC(SWR) Junction (Single T) 110mm bore equal or unequal complete all as specified and directed.
M&L for 75mm dia PVC(SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings dressed stone work and precast articles complete all as specified and directed.
M&L for brick work with sub class B bricks straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.
M&L for TMT steel bars 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in foundation, raft, basement slab, etc complete all as specifed and directed.
Use and waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping etc) complete all as specified and directed.
Taking down aluminium doors n.exe 4 Sqm each and refixing in same position after carry out necessary repairs including replacing rubber/ aluminium beading and jointing cleats, tightening if required including making good existing surface complete all as specified and directed.
M&L in repairs for fabricating and fixing powder coated (Minimum 50 miciron) aluminium sections of required size for door windows frames shutters and partitions including aluminium hinges of required size jointing cleats, screws salsh fasterners, plug for fixing with walls, column etc including taking down damage portion of damage door, windows or taking down door/ window complete all as specified and directed. (Make- Jindal/Ajit India/Hindlco Note: Rates are inclusive of necessary new fitting for door/ window i.e handle, tower bolt, butt hinges etc.
S&F in repairs floor door stopper 150mm long of aluminium alloy body and tonge, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
Dismantling water tanks of exc 500 ltr cap & n.exc 1000 ltr cap of any size complete all as specified and directed.
S&F of 500 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), triple layer, ISI marked hoisting and fixed in position complete all as specified in SSR part-I and directed.
S&F of 1000 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), triple layer, ISI marked hoisting and fixed in position complete all as specified in SSR part-I and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) or insulation board/slabs/blankets, any thickness including cover fillets complete all as specified and directed.
M&L for false ceiling of galvanised cold rolled steel section frame work size 600x600 grid size 24x38x0.50 (composite thickness) tee (bottom pre-coated ) and size 24x24x0.50m (composite thickness) thick wall angle, galvanised cold rolled steel section including suspenders as per (Gapsec) manufacturers insturction as in ceiling complete all as specified and driected. Make-Gapsec or equivalent as approved by GE.
M&L for asbestos free calcium silicate board of size 600x600x6mm thick fixed to steel frame work as in ceiling including applying two coats of oil bound distemper complete all as specified and directed.
Running welding in repairs thickness of metal to be welded not exc 6mm thick including taking down the article and refixing in position after welding (if required) complete all as specified and directed.
Taking down existing roof treatment on roof slab, parapet etc complete all as specified and directed.
M&L for 10 mm thick plaster in CM 1:4 mixed with and including water proofing compound @3% by weight of cement applied over roof slab complete all as specified and directed.
M&L for Water proofing treatment on roof surfaces with APP modified membrane with non woven polyester reinforced, weight not less than 3.5 KG/SQM and thickness of membrane not less than 3mm having thermal insulation with white plain finish on upper side of membrane uniformly embedded during manufacturing process laid in following sequence complete all as specified and directed.:- (a) Applying 10mm thick plaster in CM 1:3 mixed with water proofing compound @ 3% by weight of cement on cleaned roof surface. (b) After properly curing of the plaster, the roof will be tested for water tightening by ponding with water for three days for any seepage/leakages, etc. If any seepage/leakage is observed the rectification will be carried out by pressure grouting under pressure of 5 Kg/sqcm using cement based grout. After the roof surface is repaired, the slab /roof will be again tested for water tightness before proceeding for further treatment. (c) Properly cleaning and drying of the plastered roof surfaces, parapets, gutters, drain mouths, etc for all foreign matters such as fungus, moss, dust, etc by wire brushing and dusting. Proper grooves shall be cut around CI drain outlets/pipes/chimney pipes and other similar situations to tuck in the treatment. (d) Applying a coat of bituminous primer conforming to IS: 3384-1965 @ 0.3Kg/Sqm on the prepared surface till the surface is properly impregnated. (e) Laying APP modified water proofing membrane with 100mm overlap in longitudinal direction and 100mm overlap in transverse direction sealed and bounded to the surface by torch application method. Finally APP membrane painted with aluminium paint. (f) All joints and changes in direction should be curved with cement mortar 1:3 with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. A fillet of PCC 1:2:4 type B0 using 12.5mm graded stone aggregates shall be provided at all junctions of vertical and horizontal surfaces and wherever there is change of direction. Note: (i) Work of water proofing treatment shall be carried out by authorised applicator of the manufacturer. Necessary documentary evidence in support or the authorised applicator will be submitted to Engr-in-charge before commencement of water proofing work. (ii) The quoted rate is being to include for the cost of scaffolding, T&P etc required for execution of work.
Disconnecting of existing tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position capacity of tank exc 1000 ltr & n. exc 2000 ltr complete all as specified and directed. Note: Rate inclusive of temporary connection for supply of water to all qtrs during disconnecting.
Demolition of cement concrete in floors and pavings not exc. 15 cm thickness (below/above ground level) including floor finishes complete all as specified and directed.
M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, subbase and mass concrete complete all as specified and directed.
M&L for 20 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 complete all as specified and directed.
M&L for heavy duty flooring tiles, harsh weather & UV resistance, high abrasion resistance, MOH hardness >6 thickness 10 mm thick, area of each tile not less than 0.09 sqm, anti slip type laid in floors, steps, edges etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15 mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block (reflective type) in any shape and size confirming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block (reflective type) in any shape and size confirming to IS-15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment complete all as specified and directed.
M&L for sand filling under paver block watering and consolodation complete all as specified and directed.
M&L for cement concrete type B1 1:2:4 (20 mm graded stone aggregate) as in coping, benching etc for drain and similar works complete all as specified and directed.
M&L for providing PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) and reinforcement for precast cement concrete jallies, 25mm thick (measured solid), including all mouldings but excluding frame etc. complete all as specified and directed.
Supplying, fabricating and fixing 12 mm thick toughen glass for partition, doors etc including all necessary fitting and fixtures with and including hydraulic floor spring, embosing, ingraving work as requird complete all as specified and directed.
M&L for metalic ceiling T-24 plain/corrugated /semi corrugated powder coated duly inter locked as in false ceiling board of width 100mm/ 150 mm 0.5 to 0.7mm fixed to steel frame work as in ceiling, including dismantling of old ceiling work complete all as specified and directed.
All as per item No. 132.00 here in before but refixing only complete all as specified and directed.
M&L for providing, cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) mixed with water proofing compound @ 3% by weight of cement in benching, roof kerbs of mud stops, rounded or chamfered on edges, cills, steps; seismic and other similar bands complete all as specified and directed. Note: Water Proofing compound shall be measured and paid seperately.
M&L for precast machine pressed cement concrete tiles with grey cement and no pigments of size 25 cm x 25 cm x20-25mm thick, set, jointed and pointed in neat cement slurry in floors and cut and polished including bedding layer of 15mm thick screed in CM 1:4 as in roof complete all as specified and directed.
M&L for cleaning of structural glazing/ glass including necessary scaffolding upto 30 m height complete all as specified and directed.
Deduct Schedule of credit (calculation will be done off line) Rs. 33245.00
CREATIVE CONSTRUCTION
Samaksh Enterprises
Adamya Group Of Company
M/S Shanti Traders
M/S vikas jain
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .