Civil and allied works required for providing green belt at NFC-Kota plant, Rawatbhata.

Clearing grass and removal of the rubbish including clearing of jungle and uprooting of rank vegetation, shrubs, bushes, trees upto 300mm girth measured 1.00 metre above ground level and in-equalities which includes removal/levelling of boulder/blasted/crushed rock upto a depth of 300mm under the pipe rack or under the fire water line or in between the drain and footpath or any other area inside the plant premises either mechanically or manually and disposal of rubbish up to a distance of 150 m outside the periphery of the area cleared as per the direction of EIC.

Filled up rock/Boulders/Crushed rock/Soil

Hard rock (by chiselling or wedging or rock hammer and cutter or hydraulic splinter or controlled blasting/by using machine/ such as poclain with jack hammer or controlled blasting or by approved chemical method as directed by EIC.

Lead charges for all additional leads over the initial lead of 150 m by mechanical transport, including loading. unloading, stacking, the disposable soil, rock, debris etc within NFC Plant premises. Note: measurement of lead charges wlll be based on truck measurement with a deduction of voids @ 20% and 50% for soils and rock/debris respectively.

Supplying, stacking and levelling of good earth black or red soil at NFC Campus including the cost of excavation, loading, unloading at site, royality from outside and complete as directed by Engineer-in-charge including levelling, neatly dressing, rolling and watering as per specification (earth measured in stacks will be reduced by 20% for payment). Note :- 1. Earth to be approved by EIC before supplying and shall be suitable for landscaping. 2. Earth to be dumped near the pipe rack or near the fire water line or near the drain and footpath as per the direction of EIC for spreadding mechanically or manually under those areas.

Plain/Reinforced Cement Concrete with Nominal Mix 1:1.5:3 using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd., KCP make) with river/ manufactured/robo sand and graded stone aggregates of 20mm maximum size at all depths/heights below/above plinth level including pumping, laying in proper line, slope, level, profile, consolidation, finishing smooth/broom finish as applicable, curing,etc., complete as specified and directed.

Providing centering and shuttering using 12mm thick marine plyboard at all depths and heights below and above plinth level, vertical, horizontal, inclined,circular including strutting, propping using steel pipes/acro stagging, removal, cleaning of the same for insitu reinforced cement concrete and in plain cement concrete work, pockets for machine/equipmet foundations as required including chamfers, splays, keys, wedges, nails, bracings, brackets and applying one coat of shuttering oil on all shuttering surfaces coming in contact with concrete etc., complete as directed. Note :- Plywood shall not be used for more than eight repitions.

Brick work using quality flyash bricks of class designation 7.5 or more conforming to IS 12894 using cement mortar 1:4 (1 cement :4 using crushed stone sand of grade conforming to BIS 2116) at all depths below/Above plinth level in foundation and in plinth, storm water drains, etc., simultaneous pointing with same mortar below ground level, and ranking out joints above ground level, curing,steel/ tubular scaffolding etc., complete as per specifications and as directed by E.I.C.

Cement plastering 15 mm thick for external walls using ready made plaster in cement mortar (1cement:4 Sand) of make M/s Enduraplast, Walplast, Ultratech or approved equivalent fininshed smooth at all height above plinth level over brick walls or concrete surface including making necessary grooves in between junctions or brick masonary and RCC , providing & fixing GI plaster mesh/chicken mesh 150 mm wide along route of walls chipped for service lines, junction between RCC and brick walls and also other places wherever required over brick walls or concrete surface, preparation of surface, hacking of surface, steel/tubular scaffolding curing etc., complete as specified and directed.