REPAIR AND PAINTING TO CHARPOY GI PIPE, CHARPOY HARD TOP, BED STEEL FRAME AND OTHER STEEL FURNITURE UNDER GE (A) SURATGARH AT SURATGARH MIL STN

Taking out carefully following old unserviceable parts of Chair dining IA and M & L for replacing with new parts as per existing or as per drawing :- Drg No :- HFD-2030 (a) Seat 50 mm thick of 40 density foam,bottom made from 12mm thick hot pressed ply wood upholstered with tapesrty cloth/rexine all around as per exising design ,shape ,size and as shown on drg and directed by Engr-in- Charge.

(b) All as per serial item No 1 here-in-before but back rest

Taking out carefully following old unserviceable parts of Chair EASY(Drg No :- FD-21(M)) and M & L for replacing with new parts as per existing or as per drawing :- Drg No :- FD-21(M) (a) Seat 50 mm thick of 40 density made from 12mm thick hot pressed ply wood upholstered with tapesrty cloth/rexine all around as per exising design ,shape ,size and as shown on drg and directed by Engr-in- Charge.

(b) All as per serial item No 2 a) here-in-before but back rest

(c) Arm cushion 50 mm thick of 40 density upholstered with tapesrty cloth/rexine all around as per exising design ,shape ,size and as shown on drg and directed by Engr-in- Charge.

(a) M&L for repair to wooden seat made out of 2nd class hard wood made to shape for Chair CB steel with arms duly caned with 2 to 2.5 mm wide plastic cane except border which shall be 3mm thick flat plastic cane of approved quality as per Godrej pattern with & including fixing with machine screw 4mm dia and 75mm long with nuts and washers through holes in the wooden frame including painting with two coats of Synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. Drg No. FD-75(M) Make of Cane :- Shah & Shah / Premier / Indian Plastic

(b) All as per serial item No 3 (a) here-in-before but back rest

(c) All as per serial item No 3 (a) here-in-before but Seat of Chair CB steel without arms.

(d) All as per serial item No 3 (a) here-in-before but back of Chair CB steel without arms.

(e) M& L for replacement of flat iron stiffiner of size 25 mm x 3 mm thick, 450 mm long fixed under the wooden seat of the Chair CB steel with arms or without arms by welding so that the wooden seat can rest on it including painting with of synthetic enamel paint to match with Chair including all minor repairs and M&L for replacing PVC cap at top of back tubular steel frame and 04 Nos PVC shoes provided at bottom of chair fixed with full thread screws complete all as specified and directed by Engineer-in-Charge.

(f) M&L for replacement of Arm of chair tubular steel made out of 2nd class hard wood made to shape and size as shown on drawings, fixing with MS screw of 50 mm size including two coats of synthetic enamel paint black colour complete all as specified and directed by Engineer-in-Charge. Drg No. FD-75(M)

(g) M&L for welding around the broken MS steel frames of chair CB steel and other steel chairs and applying of paint to the welding point complete all as specified and directed by Engineer-in-Charge. Drg No. FD-75(M) & TP

Taking out carefully following old unserviceable parts of Almirah large steel and M&L for new parts of size and shape as per drawing or as specified and directed :- Drg No FD-67 (M) & 1031 (a) Chromium plated MS handle

(b) ‘G’ type clamp fixed with machine screws for refixing of shelves

(c) Locking device of MS iron, with key in duplicate and fixed with new nut, bolt & making it fully functional in all respects.

(d) 3 way locking system made out of 10mm dia mild steel rod to almirah large steel

(e) Legs of Almirah large steel made out of 1.00 mm thick PBI sheet including painting with of synthetic enamel paint .

M& L for taking out carefully following old unserviceable parts of Almirah medium steel and replacing with new parts of size and shape as per drawing or as specified and directed :- Drg No FD-67 (M), 243 (M) & 1032 (a) Chromium plated MS handle

(b) ‘G’ type clamp fixed with machine screws for refixing of shelves

(c) Locking device of MS iron, with key in duplicate and fixed with new nut, bolt & making it fully functional in all respects.

(d) 3 way locking system made out of 10mm dia mild steel rod to almirah medium steel.

(e) Legs of Almirah med steel made out of 1.00 mm thick PBI sheet including painting with of synthetic enamel paint .

M& L for taking out carefully following old unserviceable parts of Locker steel and replacement with new parts of size and shape as per drawing or as specified and directed :- Drg No FD- 222 / 257 / 1029 (a) Hasp & staple of size 75mm x 40mm x 3mm thick including properly riveting with steel body safety type.

(b) Handle aluminium anodised 100mm long 'D' type chromium plated including nuts, bolt and washers.

(c) Legs made out of 1.00 mm thick PBI sheet including painting with of synthetic enamel paint .

(d) 20mm dia Chromium plated steel pipe for hanger with set of brackets

(e) M& L for replacement of Hinges 75mm long for fixing the existing shutter of Almirah large /almirah small/ locker steel Drg No FD-1031, FD-1032 & FD-1029 and as applicable

M & L for tightening hard rubber toe of suitable size to any Tables.

Taking out carefully following old unserviceable parts of Almirah MAP large steel and M & L new parts of size and shape as per drawing or as specified and directed :- Drg No FD/E6/MAP/18 (a) Drawer and runners made out of 1.00mm thick PBI sheet including painting with of synthetic enamel paint (Olive Green) over a coat of red oxide primer after preparation of steel surface.

(b) Locking device of brass bright finish, six lever with key in duplicate and fixed with new nut, bolt & making it fully functional in all respects.

(c) 3 way locking system made out of 10mm dia mild steel rod to almirah large steel

(d) Chromium plated MS handle

(e) Sheet base made out of 1.00mm thick PBI sheet welded / rivetted with existing Almirah including painting with two coat of synthetic enamel paint (Olive Green) over a coat of red oxide primer after preparation of steel.

(f) 20mm dia Chromium plated steel pipe for hanger with set of brackets

Taking out carefully following old unserviceable parts of Table steel (900 x 600 x 760mm) and M&L for replacing new parts of size and shape as per drawing or as specified and directed :- Drg No FD- 1007 / 1008 (a) Drawer and runners made out of 1.00mm thick PBI sheet including painting with two coats of synthetic enamel paint after preparation of steel surface.

(b) Locking device of brass bright finish, six lever with key in duplicate and fixed with new nut, bolt & making it fully functional in all respects.

M&L for repairing to the steel furniture by making gas welding having 3mm thickness of steel members and 25mm to 30mm length indluding preparing the surface by leveling etc as required.

M & L in replacement members for frame of Table (steel) made out of 25mm square mild steel tube, 16 gauge (1.60mm) wall thickness including cutting, welding, bending etc including painting with of synthetic enamel paint (Olive Green) after preparation of steel surface complete all as specified and directed by Engineer-in-Charge.

M& L for replacement of top of Table dining ORs steel of size 1900 mm x 685 mm made out of 19 mm thick block board commercial type covered with & including aluminum sheet 22 gauge (0.71mm) on top and sides complete all as shown on drawings or as directed by Engineer-in-Charge. Drg No FD-165(M)

Taking out carefully following old unserviceable parts of Chair revolving /computer MAP and M & L new parts as per existing or as per drawing :- Drg No :- FD/E6/MAP/01 / TP/Godrej/Eezy etc. (a) Seat 75mm thick of 32 density foam with 12mm thick hot pressed ply wood upholstered with fabric and polyurethene foam and PVC lipping all around duly covered with tapestry cloth as per exising design and as shown on drg and directed by Engr-in- Charge.

(b) Back 75mm thick of 32 density foam with 12mm thick hot pressed ply wood upholstered with fabric and polyurethene foam and PVC lipping all around duly covered with tapestry cloth as per existing design and as shown on drg and directed by Engr-in- Charge.

(c) Only tapestry cloth of seat & back complete.

(d) Only poly fabric solid upholstery Rexine for seat & back complete of shade approved and directed.

(e) Caster wheel best quality.

(f) Pedestal assembly

(g) Hydraulic System

(h) Arm rest

Taking down old unserviceable parts from TABLE BED SIDE and M&L for replacement of new parts as per drawing and as directed by Engr-in-charge. Drg No :- FD-E6/MAP/15R (a) Top made out of 18mm thick prelaminated mdf board, Exterior grade, prelaminated both sides including 4mm thick Teak wood edging around and tighening the frame with wooden corner complete all as per drawings.

(b) All as per Item no 14a) but Sides of Table bed side

(c) Back of Table bed side made out of 6mm thick plywood commercial type.

(d) Upper Drawer : front and sides of drawer shall be made out of 18mm thick prelaminated mdf board, bottom & back shall be made out 6mm thick plywood commercial type complete all as per drawings.

(e) Bottom Drawer : front , sides and bottom of drawer shall be made out of 18mm thick prelaminated mdf board , & back shall be made out 6mm thick plywood commercial type complete all as per drawings.

(f) Chromium plated MS handle

(g) M & L hard rubber toe of suitable size.

(a) M&L for refixing existing 32 mm bore Charpoy GI pipe legs / short rails / long rails of charpoy by providing electric running welding after removing the existing welding by burning and applying two coats of Aluminum paint over welded portion of GI pipe frame complete all as specified and as directed by Engineer-in-charge. Drg No FD-220

(b) M&L for refixing existing 32 mm bore GI pipe legs / short rails / long rails of charpoy by threading at broken ends of existing GI pipe legs/short rails/long rails with dia set and tightening the GI charpoy complete with elbow and check nuts as required and as specified & directed by Engineer-in-charge. Drg No FD-220

(c) Taking out old unserviceable 3 way GI elbow from GI Charpoy frame and M&L for replacing with new 32 mm dia GI elbow 3 way (ISI Marked) and tightening the frame complete all as specified. Drg No FD-220

(d) Taking out old unserviceable GI check nut from GI Charpoy frame and M & L for relacing with new GI check nut suitable for 32 mm bore pipe as per existing size complete all as specified. Drg No FD-220

(e) M & L for Stiffener made out of 35mm x 5mm flat iron welded between the long rails duly painted with two coats of synthetic enamel paint over a coat of red oxide primer.

Taking out carefully following old unserviceable parts of Bed hard steel MAP and M & L for new parts made out of MS Pipe (16 Gauge) with black paint and size of all members shall be as per drawing and as specified and directed :- Drg No :- FD/E6/MAP/8 (R) (a) Stiffner (Support) made out of 25 x 25mm Sq MS pipe are welded between long rails of Bed in equal distance.

(b) Head board made out of 18mm thick both side prelaminated mdf board.

(c) Foot board made out of 18mm thick both side prelaminated mdf board.

(d) M & L for hard rubber toe of suitable size.

Taking out carefully following old unserviceable parts of Charpoy with Hard top and M & L new parts made out of MS Pipe (16 Gauge) with black paint and size of all members shall be as per drawing and as specified and directed :- Drg No :- FD/Map-II/01 (a) Stiffner (Support) made out of 25 x 25mm Sq MS pipe are welded between long rails of charpoy in equal distance.

(b) M & L hard rubber toe of suitable size.

M&L for continuous electric arc welding around broken joints of long rails, short rails, legs etc. of charpoy IP hard top & bed hard MAP steel all as specified and directed by Engineer - in - Charge Drg No. FD/E6/MAP/8R & FD/MAP-II/01

Taking out carefully following old unserviceable parts of Chair writing (MAP)/Chair visitor and M & L for replacing with new parts as per existing or as per drawing :- Drg No :- FD/E6/MAP/01 /TP (a) Seat 50mm thick of 50 density made from 12mm thick hot pressed ply wood upholstered with fabric and polyuretheane form and PVC lipping all around duly covered with tapestry cloth as per exising design and as shown on drg and directed by Engr-in- Charge.

(b) Back 50mm thick of 50 density made with 12mm thick hot pressed ply wood upholstered with fabric and polyuretheane foam and PVC lipping all around duly covered with tapestry cloth as per exising design and as shown on drg and directed by Engr-in- Charge.

(c) Only tapestry cloth for seat & back complete as approved, specified and directed by Engr-in-charge.

(d) Only poly fabric solid upholstery Rexine for seat & back complete of shade as approved ,specified and directed by Engr-in-charge.

(e) Arm rest made of black polyuretthane integral skin and slop towards front.

(f) M & L hard rubber shoes at bottom.

CHAIR SCHOOL WITH HAND BOARD (a) Removing the existing old unserviceable seat from chair and M & L for replacing with new seat and back in single piece of chair shall be of poly propylene CO polymer seat weight 1.20 Kg Moulded to shape and size all as shown on drawing. Seat shall be fixed to frame with suitable bolts & nuts as per drg and as directed by Engr-in-charge. Drg No :- FD/E6/MAP/ 05

(b) Removing old unserviceable writing board and fixing of new writing board made of 18mm thick pre laminated mdf board with teak wood edging with 25mm dia hollow steel pipe inserted in 20mm dia MS rod welded to frame.

(c) 25mm dia hollow steel pipe inserted in 20mm dia MS rod welded to frame and welding to broken / craked joints of chair school by Gas welding as per existing design rest complete all as specified and directed by the Engineer-in-Charge

Taking out carefully following old unserviceable parts of Table Computer and fixing parts as per existing or as per drawing Drg No :- FD/E6/MAP/03 (a) Telescopic channel set of two of depth 14 inch

(b) Nylon buffers

M&L for preparation of old painted steel & iron surfaces of under mentioned items and applying two coats of synthetic enamel paint (Olive green/ black/ grey/silver by spray painting/brush or as directed by Engr- in-Charge) on all steel & iron surfaces (inside & outside including shelves, drawers etc.) after necessary denting complete all as specified and directed by Engineer-in-Charge. (a) Almirah Large steel Drg No FD-67 (M) & FD-1031

(b) Almirah medium steel Drg No FD-67 (M), FD-243 and FD-1032

(c) Almirah Large steel (MAP) Drg No FD/E6/MAP/18

(d) Locker Steel Drg No FD- 222 / 257 / 1029

(e) Book shelf open large steel and rack steel adjustable 6 tiers (305mm width) Drg No FD-69 & FD- 106

(f) Book case Steel Drg No :-1028

(g) Chair CB steel with arms Drg No. FD-75(M)

(h) Chair CB steel without arms Drg No. FD-75(M)

(j) Table Office officers steel Drg No FD- 84 & 1003

(k) Table Office clerk steel Drg No FD- 84 & 1004

(l) Table Steel (900 x 600mm) with or without drawer Drg No FD- 1007 & FD-1008

(m) Table Steel (900 x 900 x 760mm) Drg No FD- 1009

(n) Rack Steel (1830 x 760 x 1905mm) Drg No FD-129

(o) Frame of Form without back Drg No : - FD-1027 (M) & FD-77 M

(p) Frame of Form with back Drg No : - FD-78 (M)

(q) Table steel of size 1520 x 900 x 760mm Drg No :- FD-1010

(r) Bench workshop steel 1800 x 900 x 760mm Drg No :- FD-1024

(s) Bench workshop steel 1500 x 900 x 760mm Drg No :- FD-1025

(t) Chair Verandah MAP Drg No FD/E6/MAP/11

(u) Rack shoe Steel Drg No FD/E6/MAP/02

(v) Trestle Store room Steel Drg No FD-1043

(w) Bed hard MAP / Charpoy IP hard top Drg No FD/E6/MAP/8(R) & FD/MAP-II/01

(x) Tube frame of Table Dinning ORs Drg No FD-165 (M)

(y) Teapoy Verandah (MAP) Drg No FD-FD/E6/MAP/17

(z) Charpoy IP folding hard top Drg No FD-338

(aa) Table Computer Drg No :- FD/E6/MAP/03

(ad) Table bed side (MAP) Drg No :- FD/E6/MAP/15(R)

(ae) Table bed side Steel Drg No :- FD-133 (M)

(af) Chair Writing School with hand board Drg No FD/E6/MAP/05

(ag) Chair Writing Steel Drg No FD/E6/MAP/12

(ah) Teapoy Verandah Drg No-FD-383 , FD-255 --------------------------------------------------------------------------- Note :- Old unserviceable material retrieved from above mentioned all items shall be deposited in store yard of subdivision by the contractor at his own arrangement. Noting extra shall be paid on this account.