CERTAIN REPAIRS TO THE BLDGS IN MH,DOMESTIC LINE, RP LINE, DSC LINE, NRLC IN RA AT CAD PULGAON

Complete Removal of existing treatment on walls including removing dirt, nails, making good holes cracks etc brooming down with steel wire brushing scrapping down smoke soots etc and applying Two or more coats of weather proof exterior acrylic emulsion paint (Appex or equavalent) including providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M & L for applying one coat of oil bound distemper including prepration of old decorated surfaces of wall by Washing, rubbing down and stopping of distempered and painted surfaces complete all as specified.

M&L Preparation of old painted surfaces of steel and iron work over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified.

Taking down existing water proofing treatment incl PCC padding and screed bed complete of any description from RCC roof slab by scraping by means of MS scrapper patty or by any suitable tools until the concrete surface of the slab visible and removal of rubbish off the premises as directed to a distance not exc 100 mtr all as complete specified and as directed.

M&L for 25mm thick (average thickness) PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregates) laid on roof slab finished even and fair complete all as specified and as directed.

M&L for rendering 10mm thick cement plaster in CM (1:4) mixed with WPC as per manufacturer's instructions laid over roof slab finished even and smooth without using extra cement whilst the concrete is still green complete specified and as directed. Note : WPC compound shall be measured and paid separately.

Supply only Integral water proofing compound for mixing in padding concrete complete specified and as directed.

M&L for APP polymeric water proofing membrane 4.00 Kg per sqm and min 4 mm thick reinforce with polyster non wooven fabric (wt not less than 150 gms/sqm) laid over roof surface with 100 mm over lap and including vertical surfaces upto required height and tucking into grooves and sealing complete with thermofusion, torch application over compatible bitumen primer at 0.40 ltr/sqm including bituminious aluminium paint @ 0.3 kg per sqm including cleaning surfaces all as instructed as per manufacturer and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L Non skid ceramic coloured matt finish tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified and as directed .

All as item No (14) here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:4 complete all as specified.

M&L non skid ceramic coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exc. 0.06 sqm but n. exc, 0.11 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified and as directed .

M&L glazed coloured ceramic tiles 600 x 300m x 7mm thick on vertical surfaces of walls as dado etc set and joined in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in cm 1:4 complete all as specified and as directed .

Material and labour for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as under floor tiles finished the surface even and fair complete all as specified and as directed by Engineer-In-Charge.

Dismantling ballies, hard or soft wood, any position, except in posts and struts; including taking out iron straps, bolts and nuts, etc., if type 3 or any all as per direction by Engr In Charge.

M&L for applying two coat of Synthetic enamal paint over a coat of red oxide primer on new steel based surfaces exc.10cm width or girth including preparation all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified

S&F for Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, and eves board fixed with self tapping screws as specified

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

M&L for Armstrong false ceiling with GI based powder coated steel snap grid frame work (Size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with hangers 2-3mm dia GI wire adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long or hooked to roof with needful adjustement bolts at an interval of 1.20 m centre to centre staggered and board with Gypsum board decorative type size 600 x 600 x 8/9 mm thick fixed to steel frame work including Dismantling of existing wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, fixed in any position complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

S & F GI tubing 15mm bore medium graded with all fitting and Fixed complete to walls and ceilings or laid in floors, including taking down complete all as specified.

S & F GI tubing 20mm bore medium graded with all fitting and Fixed complete to walls and ceilings or laid in floors , including taking down complete all as specified.

M&L for 75 mm thick PCC 1:4:8 in cement concrete sub floors, sub bases , floors and pavings (using 40 mm graded aggregade ) in foundation for post holes.

M&L for Chequred cement concrete coloured tiles with glozy finish painted surface size 300 mm x 300 m x 22-25 mm thick laid over and including 20 mm thick cement mortar screed in CM 1:6 as in floors complete all as specified and directed.

M & L for Machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over sand cushing complete all specified and directed. Note :- Sand cushioning will measured and paid seperately.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified.

S&F in repair CP bib taps 15mm bore dia, fancy type, cast copper alloy capstan head chromium plated, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repairs vitreous china wash basin white of size 550x400 mm including 32 mm CP waste coupling & PVC flexible waste pipe of min 90 cm long, flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete fixed in repairs all as specified and directed.

S&F in repairs vitreous China wash hand basin oval type under counter of Size: 605x430x200 mm white including 15 mm dia bore fancy type pillar tap ,waste coupling 40mm, including cutting for and pinning in ends of brackets or fixed with bottle traps complete all as specified and as directed.

S&F in repair Vitreous China bowl urinal flat back, size 430 x 370 x 340 mm (minimum) white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) and including urinal spreader CP fancy type fixed with long screws, rahul plug etc complete all as specified and directed.

S&F in repairs Brass chromium plated bottle traps 40mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

S&F (in repairs) vitreous china squatting pan 'Orissa pattern' size 580 x 450 mm white with integral foot rest (ISI marked) with 'P' or 'S' trap, front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC 1:5:10 complete and making good to distrubed floor with PCC or cement mortar 1:3 to match with sorroundings all as directed.

S&F (in repairs) vitreous china wash down water closet pan (Padestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified.

S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC make Dolfine/Commander Champion, complete all as specified.

S&F in repairs for towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed by Engr-in-charge including taking down existing towel rail.

Supply and fix 110mm PVC (SWR) WC connector bent type all as specified and as directed.

S&F in repairs 15mm bore, stop valve/angle valve, chromium plated, fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs 15 mm dia fancy type, pillar taps cast copper alloy with capstan head chromium plate screwed dwon high pressure long shank and fly nut screwed for iron pipecomplete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts, length 450 mm complete all as specified and directed.

S&F PVC flexible waste pipe with PVC cap suitable for fixing to WHB waste coupling in suitable length 32 mm dia omplete all as specified and directed.

Dismantling AC Pipe/ PVC pipes 75/110 mm dia

S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors complete all as directed.

All as per item No 49 here in before but fixed to walls with clamps complete all as directed.

S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors all as specified and directed.

S&F PVC(SWR) reducers 110mmX75mm dia.

S&F PVC (SWR) bends 75mm dia any radius complete all as directed.

S&F PVC (SWR) 75mm dia Floor Trap, plain with grating including jointing with solvent cement all as directed.

M & L for 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and as directed.

M & L for 100mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in path/paving/hard standing and finishing the surfaces even and smooth without using exra cement complete all as specified and as directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A'

Dismantling water tanks of capacity exceeding 250 & not exceeding 500 ltrs and removing to store

S&F Rotational moulded polyethylene water storage tanks, tripple layer (cylinderical vertical with closed top) of 500 ltrs capacity hoisted and fixed in position all as specified in SSR Part-I

S&F for Gun-metal, globe or gate valves 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repairs ball brass valves, high pressure, with polythene float and flynut complete, screwed for 20 mm dia iron pipe or brass ferrule.

Taking down chowkats or frames with shutters (without taking off shutters) of any description n exc 1.50 Sqm each all as specified and directed.

S&F floor door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring fixed in floor 140mm long overall length of cover plate complete all as spicified.

S&F in repair powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F in repair for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S& F 5.50 mm thick sheet ordinary glass,and glazing with rubber gasket in squares as required at site exceeding 0.50 sqm in each pane complete all as specified and as directed.

S&F for Toughened glass 12mm thick frameless door & fixed with statinless steel handle 250mm long, SS hinges and corner SS cleats, piots, mortice lock, plain/frosted glass as per site requirement complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm, single side prelam PVC sheet used and edges will be painted to match with printed to match with prelam sheet, reinforced with MS square tube & fixing in opening including hold fast.

S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and directed.

Supply and fix MS butt hinges, 100mm medium weight and fixed all as directed.

S & F 150 mm aluminium anodised barrel tower bolts of extruded section

S & F 150 mm extruded aluminium alloy handles , fabricated type, anodised

S&F Mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia, 300mm leng, with and including a minimum of 6 bolts and nut, four on bolt plate and two on staple plate and fixed

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified.

M&L in repair for Granite 19/20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified.

Dismantling of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thick (below or above ground level) complete all as specified and directed

Demolition of reinforcement cement Concrete of any description and in any position (reinforcement cut as required to facilitte demolition) all as specified and as directed.

M&L for brick work with Old size Fly ash ’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

S&F in repair for precast cement Concrete louvres and jallies, 35mm thick Type B0 (1:2:4) using (12.5mm aggregate ) including all mouldings but excluding frame (measured solid), set in cement mortar 1:6

M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:4 complete all as specified & as directed.

Taking down cement plaster on bricks etc including raking out joints racking for key scrubbing down with water etc.

M&L rendering 15mm thick in CM 1:6 on fair faces of brick/stone wall or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparing newly plastered wall surfaces and applying two coats of oil bound distemper incl one coat of wall care putty complete all as specified and as directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of white cement primer complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggragate as in coping/bed blocks, bed plates etc including weathering slightly rounded or chamfered angles and throating making groves for fixing of man hole cover including necessary form work

M & L for 75mm thick cement concrete (1:3:6) type C1 using 20 mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & smooth and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed.

Please Enable Macros to View BoQ information