Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance DOOR NO 65 4 64 1A KOTHA NAKKAVANIPALEM MALKAPURAM POST VISAKHAPATNAM 530011 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 530011 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
21 Nov 2024, 6:00 pmClosed
GE GOLCONDA
GE GOLCONDA LANGER HOUSE ROAD OPP MILITARY HOSPITAL HYDERABAD TELANGANA-500 008
PROVN OF COVERED SHED WITH HARD STANDING AT ASIF NAGAR AREA AND PROVN OF GEYSERS AND EXHAUST FANS TO MD ACCN AT YEDDUMAILARAM UNDER GE GOLCONDA
2024_MES_682155_1
8815/E8
Open Tender
Civil Works
Item Rate
180 days
HYDERABAD
As Per Tender
8 documents required · 8 mandatory
₹500
GE GOLCONDA
₹94,000
Yes
2 Dec 2024
1 Nov 2024
23 Nov 2024
1 Nov 2024
21 Nov 2024
14 Nov 2024
Amount
Surface excavation n.exc 30cm deep and averagng 15cm deep and getting out Soft/loose soil etc complete all as specified and as directed.
M&L for Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation,etc or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/Dense soil complete all as specified and as directed.
M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.
M&L for Reinforced cement concrete Deisgn Mix M-25 Grade (using 20mm graded stone aggregates ) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and as directed.
Formwork to sides of concrete foundations, rough finished surfaces of flat concrete, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and as directed.
Excavation in post holes (or similar holes) each not exceeding 0.5 cum, and getting out in soft/loose soil, including returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified.
M&L for Cement concrete in foundations, filling and mass concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in post hole filling complete all as specified and as directed.
M&L for Hardcore of gauge n exc. 63 mm, using broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base/foundation filling complete all as specified and as directed.
M & L for 100 mm thick, Cement concrete type B-2, 1:2:4 (40mm graded stone aggregate), with finished cement concrete surface even and smooth without using extra cement etc complete all as specified and as directed.
S&F Rolled mild structural steel roof trusses (framed), trussed, purlins,posts, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe 410-W (Gde-E) complete all as specified and as directed.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide exc 10 cm in width or girth complete all as specified and as directed.
M & L for brick work with fly ash brick subclass “B” Old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:4 complete all as specified and as directed.
M&L for 15mm thick in CM 1:4 rendering on brick or concrete surfaces finished even and fair (without using extra cement) complete all as specified and as directed.
M & L for preparation of newly plastered surfaces of wall and applying three coat of white wash complete all as specified and as directed.
M & L PCC (1:2:4), type B0 (using 12.5 mm graded stone aggregate) as in surface channels and drains, finished even and smooth complete all as specified and as directed.
M & L PCC (1:2:4), type B1 (using 20 mm graded stone aggregate) as in coping including necessary form work complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point in soils complete all as specified and as directed.
M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and as directed.
M&L Forming Contraction (Dummy) joints 65mm deep X 10mm wide, filled with sealing compound complete all as specified and as directed.
M&L Forming Construction joint 30mm deep X 10mm, filled with sealing compound complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for Mild Steel TMT Bars 6 to 8mm dia bars cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.
Supply and fix exhaust fan 240V, 300mm sweep, metalic body complete with all accessories complete all as specified and directed. (Note: Cost for cutting holes and making good to the distrubed surfaces shall be deemed to be included in quoted rate)
M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone/brick, masonary walls, roof etc including new CI/MS sunken box of required size and all as directed by Engineer-in-Charge & 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified and directed.
All as per item No.28 but for One 5 pin 15 / 16 Amps switch socket outlet point on independent board with 4 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 4 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed
S&F for Stop Valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screws both ends for irn pipe size of 15mm dia connect between geysers inclet PVC water and inlet GI pipe 15mm dia pipe line including necessary plumbing and civil works complete all as specified and as directed.
S&F for bib tap chromium plated, cast copper alloy with crutch or butterfly handle, screwed for iron pipe size of 15mm dia connect to outlet GI pipe line including necessary plumbing and civil works complete all as specified and as directed.
S&F switch piano flush type single pole one way 5/6 Amps complete all as specified and directed
S&F Switch piano one way 15 Amps flush type complete all as specified and directed
S&F socket outlet 3 pin 15 Amps flush type complete all as specified and directed
S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed
S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar single pole and neutral 240V, 4 Ways, double door complete all as specified and directed.
Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 6-32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles (SP) and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.
Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 4.00 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 4.0 Sqmm as earth lead in and including PVC conduit medium grade with all fittings suitable for concealed type and making good the disturbed wall surfaces to match with existing specification all as required at site complete with all as specified and directed. Note: (i) Two runs of cable and obe run of earth wire shall be measured as one run length. (ii) Earth wire shall be run inside the same casing capping/conduit. (iii) Cost of PVC casing capping/conduit deemed to be inclusive in the quoted rate.
S&F galvanized steel water tubing medium grade of 15mm bore complete with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions complete all as specified and directed.
All as per item No.40 above but 20mm bore
S&F for PVC connection 15mm dia, 600 MM long with brass ferrules on both ends fixed complete all as specified and directed
S&F for 15 mm dia Stop valves, cast copper alloy, fancy type, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed
S&F for Gun metal globe gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and as directed.
NAVANAND ENTERPRISES (BID ID -3169733)
SANJEEV CONSTRUCTIONS (BID ID -3168438)
M/s D.Krishna Varma (BID ID -3170415)
S.R.M.K Enterprises (BID ID -3171347)
VACON INFRASTRUCTURES (BID ID -3170677)
Sri Lakshmi Enterprises (BID ID -3170813)
MAHIRA ENGINEERING & INFRASTRUCTURE (BID ID -3170786)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .