SPECIAL REPAIRS TO FOUNDRY HANGAR P14 AND OFFICE FACILITIES AT ADE BANGALORE

Amount

Dismantling of asbestos cement corrugated sheets of roof covering/north light curve sheets (height up to 12 to 15mtr, factory type bldg/Hangar) complete.

Material and labour for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPA as in roof covering/clading to wall fixed with self tapping screws all as specified and as directed.

All as per item No 2 here-in-before, but corrugated curve sheets on top of north light including dismantling complete all as directed

Supply & fix in repairs (including dismantling) GI plain , galvanised mild steel sheeting, 1.25mm thick, in ridges. as in valley gutters with grade of zinc coating 275 of fixed with clamp all as specified and as directed. Note : (a) Approximate height of the work is up to 12 Mtr (b) There is no accessibility to the roof. (c) Necessary scaffolding if necessary to fix valley gutter.

Dismantling mild steel work of any description not otherwise provided for complete all as directed

M&L bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0

All as per item No 6 here-in-before, but fabrication and fixing only after made it shaped with old steel obtained from dismatled material (from item No.5) including shaping, welding if required complete all as specified and as directed

M&L preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

S&F in repairs Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-W (Gde E-250) quality B complete all as specified and as directed

S & F in repairs roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.Fe 410-W (Gde E-250) quality B complete all as specified and as directed

Fabrication and fixing only by using dismantled material (from item No.5) for roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.Fe 410-W (Gde E-250) quality B complete all as specified and as directed

Hacking out old cracked/broken glass from metal framed including punching or drilling out old glazing pins/spring clips from roof of Hangars (Height up to 12 to15 Mtr, factory type bldg/Hangar) complete all as specified and as directed.

S&F rough cast wired figured glass, 6.40 mm thick of area exc 1.00 sqm but not exceeding 1.50 sqm fixed to metal frame complete all as directed.

Supply and fix in repairs aluminium anodised framed work for fixing north light glass complete all as directed.

Demolition of PCC (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as directed.

M & L 75 mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) complete all as specified and as directed

M&L Granolithic concrete 1:1:2 floor topping 30mm thick; laid over cement concrete subfloors etc. and finished to an even and fair surface complete all as specified and as directed

Supply only metallic floor hardener

Demolition of brick work or stone masonary/boulder masonary, built in cement mortar including all quions, arches,pillars etc but excluding ashar facings, dressed stone work and precast article etc and depositing of debris out side MD Land all as specified and directed.

Material and labour for brickwork with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement 1:6 complete all as specified and as directed.

All as per item No 20 here-in-before, but except bricks complete all as directed

Taking down cement or cement lime plaster of any description from walls, including racking out joints hacking for key scrubbing down with water etc , complete all as specified.

Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6 finished even and smooth without using extra cement complete all as specified and as directed..

Taking down chowkhats or frames without taking of shutter from frame exc 1.5 sq. m but n exc 4 sq m each complete all as specified and as directed.

Taking down chowkhats or frames without taking of shutter from frame n.exc 1.5 sq. m complete all as specified and as directed.

S & F for anodised aluminium frame for doors, window, ventilators with powder coated with one or more rebats including jointing, cleats for fixing extra complete all as specified and as directed.

S&F Steel windows for industrial buildings with centre hung shutters including brass pivots, catch spring and pulley wheel complete all as specified and as directed.

S&F Steel window for industrial buildings, fixed type, with glazing bars complete all as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or glazing pin in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

Supply and fix for heat absorbing glass of 4 mm thick of any size complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolts 150 mm length of extruded section complete all as specified and as directed.

S & F Butt hinges,100mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and as directed.

S & F Aluminium handles, cast type anodised oval or 'D' type of size 100mm complete all as specified and as directed.

M & L preparing new steel surface of any description, exceeding 10 cm width or girth, not other wise described over and applying two coat of synthetic enamel paint over already shop coated surfaces complete all as specified and as directed.

M & L preparing old steel surface of any description, exceeding 10 cm width or girth, not other wise described over and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparing the surfaces of newly plastered wall surfaces and applying two coat of distemper with oil emulsion paint over a coat of primer complete all as specified and directed

M&L preparing the surfaces of old wall and applying two coat of distemper with oil emulsion paint over a coat of primer after complete removal of existing treatment all as specified and directed.

M&L preparing the surfaces of old wall and applying one coat of white wash on ceiling surfaces complete complete all as specified and directed

Material and labour for one coat of aluminium paint on old steel srufaces of any description over 10 cm in width or girth including preparation of srufaces etc. complete all as specified.

Supply and fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in any position on walls complete for 150 mm bore pipe including taking down old unserviceable PVC pipe complete all as specified and as directed..

Supply and fix PVC (SWR) bends 150 mm bore fixed in any position on walls complete for 150 mm bore pipe complete all as specified and as directed..

M&L for refixing shutter, in the same opening, of any description area exc.1 but not exc 2 sqm complete all as specified and directed.

M&L preparing old wooden surface of any description, exceeding 10 cm width or girth, not other wise described over and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete

M&L for 25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in floors/paving finishing the surface even and smooth without using extra cement concrete complete all as specified and directed.

M&L coloured Non Skid Joint less ceramic tiles (non-skid) of size 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M&L coloured glazed ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick screeding bed in cement mortar 1:4 complete all as specified and directed

Taking down shutters any description area exc.1 but not exc 2 sqm complete all as specified and directed.

S & F 40 mm thick flush shutters, solid core construction, with particle board core and both faces is covered with decorative face veneer with lipping/frame to match side colour and textured panels complete all as directed

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing.

Supplying and fixing FACTORY MADE SOLID PANEL PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete as per direction of Engr-in-Charge, manufacturer’s specification & drawing.

S&F steel water tubing medium grade 15mm bore galvanized with all fittings and fixed to walls and ceiling or laid in floors including cutting chases where required and taking down old steel tubing complete all as specified. Make: Tata/ Jindal/Ravindra

S&F steel water tubing medium grade 20mm bore galvanized with all fittings and fixed to walls and ceiling or laid in floors including cutting chases where required and taking down old steel tubing complete all as specified. Make: Tata/ Jindal/Ravindra

S&F rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 1000 Itrs, hoisted and fixed in position as in repair iincluding disconnecting exixting tanks of any description all as specified

S & F in repairs bib taps fancy type 15 mm , cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete

S & F in repairs Stop valve cast copper alloy fancy type 15mm bore with long shank and cup (concealed type) screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe complete

Vitreous china ware water closet Orissa pattern including 'P' or 'S' trap connecting to trap and to flushing pipe anti Syphonage pipe etc complete with foot rest, fixed as in repairs of size 580mm X 440mm (jointed with epoxy raison to glazed trap) including provision of lime concrete bedding complete all as specified and as directed

S&F vitreous china wash down water closet pan(pedestal pattern)white,(excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed

S & F in repair PVC low level flushing cistern of cap 10 ltrs including PVC flush pipe for squatting pan fixed to wall ISI marked completed with brackets and accessories and making good to disturbed portion complete matching with existing surface and Making GI pipe connection low level complete.

S&F plastic water closet seat, white , closed pattern, with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete.

S & F in repairs 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)

S & F in repairs Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed

S & F in repairs vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed.

S&F in repairs vitreous china wash hand basin (Pedestal type) white flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts complete all as directed.

S&F pillar tap fancy type cast copper alloy, with capstan head chromium plated, screwed down high pressure, with or without letter 'Hot' or cold with long screwed shanks and fly nut screwed for iron pipe of bore 15mm , complete all as specified and directed. (weight of pillar tap shall not be less than 665 gms).

S & F in repairs 450mm long PVC connection with PTMT check nuts for 15mm bore pipes of approved quality.

S & F Brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges, fixed in repair.

S & F in repairs toilet paper holder chromium plated fixed to wall with chromiuim plated brass screws complete all as specified and as directed

S & F in repairs angle cock fancy type chromium plated 15mm bore complete all as specified. (Make : Prayag/ Parryware/ Jaquor)

M&L preparing new wooden surface of any description, exceeding 10 cm width or girth, not other wise described over and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F high density poythelyne (HDPE) pipes of pressure rating 6kgf/ sq/ m including socket etc., complete all as specified and directed

S&F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and as directed

M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as directed

Taking down the existing steel rolling shutters from brackets with connecting rod for servicing and fixing only suspension shaft of 50mm dia GI pipe heavy grade, helical springs, bearings etc., servicing for free movement and smooth function of rolling shutter and fixing unit in original position etc., complete, area exc 10 Sq m but n.ex 20 Sqm complete all as specified and as directed.

Taking down carefully U/S aluminium/ copper point wiring (light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose, light fittings etc , removing all material for reuse/ issued under sch of credit and making good the distrubed surface as the existing one, complete all as directed.

M&L point wiring complete with Multi stranded copper conductor size 1.50 sqmm PVC insulated, unsheathed,FRLS cable , 1100 volts grade conforming to IS 694 multistranded , for phase and neutral, drawn in and including rigid PVC surface type conduit / casing capping on walls/ floors/ ceiling etc with and including metal flush boxes of suitable size and modular white plate with frame for mounting of fittings, modular type switches, regulator and also including 1.5 sqmm PVC insulated unsheathed copper cable green in colour as continuous earth continuity conductor and connecting to earth dolly,cutting chasis to the walls / floors/ ceiling and repairing with existing surface after work ,complete all as specified and as directed.

One light point controlled by one way switch

One fan point controlled by one way switch

One 3 pin socket point 5 Amps on the independent board complete.

All as per item No 2 here-in-before, but using copper conductor 2.5 sqmm PVC insulated unsheathed FRLS cable for phase and neutral with copper conductor of size 1.5 sqmmm PVC insulated unsheathed continuous earth continuity for 3 pin 15 amps soket outlet independently complete all as specified and as directed.

Supply & fix switch modular type single pole 1 way 5 Amp 230 volt complete as directed.

Supply & fix socket combination 6 Amps modular type, 230 volts grade all as directed.

Supply & fix Socket combination 6A/16A - modular type 230 volts grade with frame and cover all as specfied.

Supply & fix switch modular type single pole 1 way 16 Amp 230 volt complete as directed.

Supply & fix ceiling rose surface backelite 3 phase PVC, polycarbonate, Isolated body. complete all as directed.

Supply and fixing of Modular fan regulator step type 100 w,230 Volts complete

Supply and fixing of sheet metal enclosure powder coated, Distribution board, Double Door type, VTPN MCCB 100 Amps as Incomer, 6 way, 415V, Double door type IP 43 protection, shrouded Neutral Bar & Pan assembly with flexible link Cement spill protector, Door earthing, complete Make INDOASIAN, Model Optipro F1+ 24 or equivalent of HAVELLS/ L & T/ LEGRAND

S & Replacement of Distribution Board, TPN 6 way, 240V, double door type complete all as specified and directed.

Supply and fix MCB DB SPN 12 Way 240 volts double door with 200 amps rated aluminium bus bar complete all as specified and directed.

Supply & fixing of MCCB 4 pole, 100 Amps 415 Volts 25 KA for fixing in VTPN DB complete

Supply & fix 'C' Curve MCB TPN 63 Amps 240 volts 10 KA rupturing capacity complete all as directed Make : Legrand or eqivalent in C&S/Scheinder/Havells

Supply & fix MCB SPN 6 to 40 Amps 240 volts 10 KA rupturing capacity complete all as directed Make : Legrand or eqivalent in C&S/Scheinder/Havells

Supply & fix 'C' Curve MCB SP 6 to 32 Amps 240 volts 10 KA rupturing capacity complete all as directed Make : Legrand or eqivalent in C&S/Scheinder/Havells

Supply and fixing of Single Pole & neutral enclosure with a two pin and earth plug with socket complete with one SP MCB 20 Amps.

M&L for sub main wiring complte with 4 runs of 16 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends including 2 runs of 10 Sqmm of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly including removing unserviceable sub main wiring complete all as directed and specified.

M&L for sub main wiring complte with 4 runs of 10 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends including 2 runs of 6 Sqmm of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly including removing unserviceable sub main wiring complete all as directed and specified.

M&L for sub main wiring complete with 2 runs of 6 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends including 1 run of 4 Sqmm of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly including removing unserviceable sub main wiring complete all as directed and specified.

M&L for sub main wiring complte with 2 runs of 4.00 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends including 1 run of 2.50 Sqmm of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly including removing unserviceable sub main wiring complete all as directed and specified.

Supply & fixing of LED 36 Watts surface light fitting 2 x 2 fitting Make: CG, Model : POLARIS, Cat Ref : LCTLSN - 36 CDL or equivalent make in Havells/philips/wipro

Supply & fixing of LED 36 Watts surface light fitting 2 x 2 fitting Make: CG, Model : POLARIS, Cat Ref : LCTLRN - 36 CDL or equivalent make in Havells/philips/wipro

Supply & fixing of LED 09 Watts surface light fitting Make: CG, Model : TRIMLINE, Cat Ref : LCTL-10 CDL or equivalent make in Havells/philips/wipro

Supply and fixing of LED light 20 watts, 5700 K, slim down light durable LED batten with decorative end caps, Make : CG, TRIMLINE, CAT REF LDL - 36 NW

Supply and fixing of Circular LED High Bay light 80 watts complete all as specified and as directed Make : Bajaj/CG/Philips/Havells

Taking down old existing ceiling fan 1200/1400 mm sweep single phase,Servicing of ceiling fans and painting of ceiling fans and refixing and connecting with necessary cable from ceiling rose or connector to fan and making good to damaged surface of wall/ceiling to match existing finish all as specified and directed

Taking down old existing Exhaust fan 300 mm/400 mm sweep single phase,Servicing of painting of exhaust fans and refixing and connecting with necessary cable from ceiling rose or connector to fan and making good to damaged surface of wall/ceiling to match existing finish all as specified and directed

Taking down old existing Wall mounted fan, Servicing of wall fans and refixing and connecting with necessary cable from or connector to fan and making good to damaged surface of wall/ceiling to match existing finish all as specified and directed

S&F Power console made out of aluminium insulation material poly carbonate sheet of colour as approved in standard length comprising of 5 Nos 5 Amps 5 pin electric socket controlled by one switch (modular type) with one control MCB 20 Amps SP and indication lamp fitted, internal wiring including fixing of console on frames, etc of suitable size all as directed. Make :- Anchor roma.

M & L for earthing complete with Galvanised Iron earth plate of size 600 x 600 x 6.15 mm buried directly and preferably vertically in ground with top edge not less than 1.25M below ground level connected with GI strip of 32 x 6 mm connected to the earthing test point all as specified and all as directed by Engineer incharge including testing and submission of test reports. Note : The rates quoted are inclusive of copper earth strip upto the standard length as specified in the SSR part -1. However additional length will be measured and paid seperately in respective item.

M & L for GI earth continuity main earthing Strip fixed to wall on batten or recess or chases or buried in ground or drawn in conduit of size 32 x 6 mm all as specified and directed.

devan enterprises

M/S J J ENTERPRISES

ARATHEERTHA CONCEPTS

AKASH CONSTRUCTIONS

UNIVERSAL ENGINEERING

M AND V ENTERPRISES