Karnataka

AOC

Works

Water supply/sewage lines

PROVIDING WATER SUPPLY SCHEME TO YAKTAPUR VILLAGE IN SHORAPUR TALUKA OF YADGIR DIST

Rural Drinking Water and Sanitation Department

RWSSD Division Office Yadagiri | Yadgir, Karnataka

Amount: ₹54.3 LCloses: 18 Apr 2026Closed

Timeline

Published5 Apr 2026
Closed18 Apr 2026
Awarded—

Bids

1 Bid18 Apr 2026

#	Company	Amount	Status
1	Somanagouda B Karekall ₹53.8 Laccepted-aoc	₹53.8 L	accepted-aoc

Tender Value

₹54.3 L

EMD Value

₹1.3 L

Closing Date

18 Apr 2026, 10:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Drinking Water and Sanitation Department

Contact Person

MANJULA AE

Mobile Number

Work Description

PROVIDING WATER SUPPLY SCHEME TO YAKTAPUR VILLAGE IN SHORAPUR TALUKA OF YADGIR DIST

Tender Information

Tender ID

RWSSD/2026-27/WS/WORK_INDENT9990

Reference Number

RWSSD/2026-27/WS/WORK_INDENT9990

Tender Type

Open

Product Category

Water supply/sewage lines

Form of Contract

Two Tender Document System(Two Cover)

Location

RWSSD Division Office Yadagiri

Source Website

Subscribe to view

Documents Required

12 documents required · 12 mandatory

Technical Bid

RequiredThe Contractor Should Scan the PRED/PWD Registration Certificate.

RequiredThe Contractor Should Scan the PAN Card & GST No. Certificate.

RequiredTenderer shall obtain the work done certificate 50 percentage of the amount put to tender in single work & of similar nature of work from the competent authority not below the rank of Executive Engineer District Level Officer and scan the original certificated and attach the scanned file to the tender. The original certificate shall be produced at the time of opening of Tenders. Last 5 financial years

RequiredQuantity wise work done As shown in bid document

RequiredThe contractor should have yearly turnover not less than the Amount put to Tender in any two financial years out of last 5 financial years. i.e. 2021-22, 2022-23, 2023-24, 2024-25 and 2025-26 Turn over Certificate, Certified by Chartered Accountant

RequiredThe contractor must scan the Assessed available tender capacity

RequiredDetails of Ongoing Works

RequiredThe contractor should upload the Line of Credit for value not less than 30 Percent of the Amount put to Tender

RequiredA Self Declaration stating that I / We have gone through all the Tender conditions and accepted them without any pre conditions

RequiredContractor Postal Address and Mobile No

RequiredAs Per Bid Documents

RequiredDifference amount less DD, Demand Draft to be Scanned and uploaded at time of submmition of tender

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Tenderer shall obtain the work done certificate 50% of the amount put to tender & of similar nature of work from the competent authority not below the rank of Executive Engineer (District Level Officer) and scan the original certificated and attach the scanned file to the tender. The original certificate shall be produced at the time of opening of Tenders. (Last 5 financial years)

Third party consultants may be engaged for checking quality and quantity of work and to prevent any misuse. Proper reporting methods, through these agencies and their comments to be reviewed / addressed immediately at District level. Quality of work is of most importance

If any dates mentioned above happens to be a holiday, the next working day and the same time and venue holds good in lieu of the date mentioned

The contractor should scan the work done certificate, GST number, PAN and Registration certificates and other documents. If not scanned above certificates such tenders will be rejected

The authority competent to accept the tenders shall have the right of rejecting all or any of tenders without assigning any reasons and will not be bound to accept the lowest tenders

Materials like pipe, CI pipe, cement aggregate sand etc., required for the work shall be procured by the tenderer themselves and shall be of slandered quality as per IS specifications and should get tested by the quality control authority before used to the work at his own cost

The work will be placed under third party inspection

The lowest bidder will furnish security deposit amount before the work order is given or 20 days from the date of acceptance whichever is earlier(DD/FDR)

The contractor should have yearly turnover not less than Twice the Amount put to Tender in any two financial years out of last 5 financial years. i.e. 2021-22 , 2022-23 , 2023-24, 2024-25 & 2025-26 (Turn over Certificate) (Certified by Chartered Accountant)

The contractor should upload the Line of Credit for value not less than 30% of the Amount put to Tender

Each Tenderer shall own or make arrangements for procuring the machineries required for executing the work & all the materials should be brought and used by the contractors and materials will not be supplied from the Department

The work should be carried out in accordance with the standard specifications specified by the department. Maintenance period from the contractor for the above works is 1 year from the date of completion of work

The work should be executed strictly as per the tender specification mentioned. Contractor should arrange for quality check at different stage of work for quality assurance as per direction of Engineer-in-charge during the work in progress and after completion. If any failures found the cost will be recovered from the contractor and will be recommended for black listing immediately

Contractor should made an agreement within 14 days of tender acceptance date and work should be carried out with in the 1 week time after agreement. If not tender will be cancelled at the contractors own risk and cost

The contractor must scan the Assessed available tender capacity

Any over writing of civil engineering words and measurements should be clarified the considered department ( No claims should be considered)

Acceptance / Cancellation of the works are reserved by under signed without any reasons for the same

Corrigendum / modifications / correction, if any, will be published in the website only. More details should be collected from the office at working hours

The Department is not responsible for any delay in accessing e-procurement portal

The contractor should follow terms and conditions as specified in standard bid document KW 1, 2, 3 or 4 whichever may be applicable

After opening of Technical bid, eligible bidders work done if required will be sent to work done verification to concerned authority, more than 7 days for conformation delay of work done will be rejected

Tenderer must submit his present accurate postal address and phone / cell phone number

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form

All other conditions as per bid document and tender conditions

Technical Criteria

Past Experience

Quantity wise work done (As shown in bid document)

Work Done Certificate

Tenderer shall obtain the work done certificate 50 percentage of the amount put to tender in single work & of similar nature of work from the competent authority not below the rank of Executive Engineer District Level Officer and scan the original certificated and attach the scanned file to the tender. The original certificate shall be produced at the time of opening of Tenders. Last 5 financial years

Work Done Certificate

Capabilities of Vendor

The contractor must scan the Assessed available tender capacity

Others -- BID CAPACITY

Details of Ongoing Works

Others -- Details of Ongoing Works

The Contractor Should Scan the PAN Card & GST No. Certificate

GST Registration

The Contractor Should Scan the PRED/PWD Registration Certificate

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

The contractor should upload the Line of Credit for value not less than 30% of the Amount put to Tender

Line of Credit

The contractor should have yearly turnover not less than the Amount put to Tender in any two financial years out of last 5 financial years. i.e. 2021-22, 2022-23, 2023-24, 2024-25 and 2025-26 (Turn over Certificate) (Certified by Chartered Accountant with UDIN Number)

Audited CA Certificate of Annual Turnover

Others

Difference less Demand Draft to be Scanned and uploaded at time of submmition of tender

Others -- LESS DD

As Per Bid Documents

Others -- As Per Bid Documents

Contractor Postal Address and Mobile No

Others -- Contractor Postal Address and Mobile No

A Self Declaration stating that I / We have gone through all the Tender conditions and accepted them without any pre conditions

Others -- A Self Declaration stating that I / We have gone through all the Tender conditions and accepted them without any pre conditions

Work Locations

Fee & Financial Details

Tender Fee Amount

₹1,360

EMD Fee Amount

₹1.3 L

Important Dates

Last Activity

18 Apr 2026

Published

5 Apr 2026

Bid Opening

21 Apr 2026

Download Ends

7 Apr 2026

BOQ Preview

•

PROVIDING WATER SUPPLY SCHEME TO YAKTAPUR VILLAGE IN SHORAPUR TALUKA OF YADGIR DIST

•

SINKING OF BOREWELL OF 500 FEET DEEP (4 NOS.) : Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burder...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

•

PVC pipes of 10 Kg/cm2 for 160mm dia

•

Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...

•

ERECTION OF PUMPING MACHINERY WITH ACCESSORIES (2 Nos. ) Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000; 3Phase, SS Bowl & Impeller with Low volt Mot...

•

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary a...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments - 1x3x4 ...

•

Supply and delivery at site of brand new best make 63mm dia. pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments.

•

Supply and delivery at site of brand new best make 50mm dia. gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments

•

Supply and delivery at site of brand new best make 50mm dia. non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments

•

Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog...

•

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

•

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit

•

Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.

•

Providing,Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials...

•

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

•

ERECTION OF RCC HUME PIPE PUMP HOUSE (2 NOS.) : Earthwork excavation by manual means for foundation of buildings, culverts, water supply and sanitary lines and electrical conduits etc, either in pit...

•

Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregtes @ 0.465cum ma...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

RCC hume pipe Circular pump house: Supplying precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 ...

•

Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,c...

•

Providing ruled pointing to coursed stone masonry with cement mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost of materials, labour, curing complete as per spe...

•

RAISING MAIN FROM P-BOREWELL TO EX-50 KL ELSR (PE-80 PN-10 90MM DIA. LENGTH 4700 MTR.) : Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and tech...

•

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, b...

•

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

•

90mm dia. Electro Fusion Coupler

•

90mm dia. Electro Fusion Tee

•

90mm dia. Electro Fusion Elbow

•

Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...

•

PIPE LINE FROM EXISTING OHT TO EXISTING OPEN WELL AT YAKTAPUR VILLAGE (PE-80 PN-10 90MM DIA. LENGTH 900 MTR.) : : Earth work excavation for pipeline trenches in all kinds of soils by mechanical mea...

•

90mm dia. Electro Fusion Coupler

•

90mm dia. Electro Fusion Tee

•

90mm dia. Electro Fusion Elbow

•

SINKING OF BOREWELL OF 650 FEET DEEP (2 NOS.) : Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burder...

•

PVC pipes of 10 Kg/cm2 for 160mm dia

•

ERECTION OF PUMPING MACHINERY WITH ACCESSORIES (1 Nos. ) Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000; 3Phase, SS Bowl & Impeller with Low volt Mot...

•

Supply and delivery at site of brand new best make 63mm dia. pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments.

•

Supply and delivery at site of brand new best make 50mm dia. gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments

•

Supply and delivery at site of brand new best make 50mm dia. non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit

•

Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.

•

PIPE LINE 75MM DIA. (PE-100 PN-8) Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, constructi...

•

75mm dia. Electro Fusion Coupler

•

75mm dia. Electro Fusion Elbow

•

POWER SUPPLY ARRANGEMENT AT YAKTAPUR PART-A MATERIAL COST : 200004-PSC Pole-8.0M Long,200 kg WL

•

279013-11kV, Special 3pin X, arm - MS

•

279020-11kV Horizontal X arms - Mild

•

279092-H.T.S.T Support 50X6mm flat -

•

279140-Anchor Rod using 12mm rounds/G

•

279146-Turn buckle (GI)

•

279503-PCC Pole clamp - MS

•

279650-Guy clamp - MS

•

281110-7/10 SWG Guy Wire

•

281683-Spiral Earth Electrode

•

283005-11kV Pin Insulator (Shell onl

•

283040-DISC Insulators 45kN

•

283055-11kV Pin Insulator (G.I Pin o

•

283166-NO.15 Strain Insulator

•

284108-Rabbit ACSR Conductor

•

733616-B & N Size 16X65mm

•

733634-B & N Size 16X225mm

•

LABOUR COST : Head loading of the pole 105 to 185 Mtrs

•

Loading & unloading of 8 mtr RCC/PSC poles

•

Same as above but erection of RCC/PCC/PSC poles of 7.5 to 8 mtr long in pit of 1.5 mtr depth.

•

Fixing of V-Shape/ Horizontal cross arm including single top support Braces and Insulators fixing.

•

Fixing of V-Shape/ Horizontal cross arm including single top support Braces and Insulators fixing.

•

Fixing of HT/LT single top support

•

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

•

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

•

providing spiral earth electrode type earthing along with pole (without charcoal, salt etc.,)

•

For Rabbit ACSR

•

MATERIAL COST PART-B : 200105-RCC Pole-9.0M Long,145 kg WL

•

278911- Barbed wire (10 mts.)

•

279111-25/63kVA T.C.Sets (For star ra

•

279140-Anchor Rod using 12mm rounds/G

•

279146-Turn buckle (GI)

•

279650-Guy clamp - MS

•

279800-Fish Plate - MS

•

281008-8 SWG G.I.Wire

•

281110-7/10 SWG Guy Wire

•

281674- G.I.Grounding pipe, B-Class, 4

•

283005-11kV Pin Insulator (Shell onl

•

283040-DISC Insulators 45kN

•

283055-11kV Pin Insulator (G.I Pin o

•

283166-NO.15 Strain Insulator

•

284503-LT Spacer for TC Wiring

•

285549-Weasel to Rabbit

•

289029-PVC Wire-50 Sq.mm

•

301107-L.T.Protection kit

•

302122-11kV Class, Solid core Set/ 3 Nos.

•

303200-L.A. 9kV, 5kA, Metal Oxide

•

321437-25kVA, Aluminum Wdg, BEE 4 Sta

•

600095-Good Quality well burnt Charco

•

607054-Good Quality Salt for groundi

•

LABOUR COST : Erection of RCC/PSC poles 9 to 10 mtr long but in a pit of 1.8 mtr depth

•

G.I. Barbed Wire (12 mtrs/1kg)

•

Erection of pole Upto 63 kVA with 9 mtrs. RCC pole

•

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

•

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding

•

excavation of PIT)

•

Wiring for lightinh/power circuit using one of PVC insulated 1100v grade stranded Aluminum unsheathed wire 4 Sq mm single core/multi core cable in open or cocealed system of wiring

•

Fixing of LT Protection Kit

•

HG fuse 11 kv Solid core type(3 nos)

•

Fixing of 3 Nos lightning arrestors including wiring.

•

a) Erection of 25-63 kVA Transformer on Transformer structure.

•

MATERIAL COST PART-C : 200103-RCC Pole-8.0M Long, 115 kg WL

•

279014-L.T. 4Pin X arms - MS

•

279140-Anchor Rod using 12mm rounds/G

•

279146-Turn buckle (GI)

•

279523- RCC Pole clamp - MS

•

279650-Guy clamp - MS

•

281683 - Spiral Earth Electrode

•

283158-NO.8 Strain Insulator

•

284105-Weasel ACSR Conductor

•

733616-B & N Size 16X65mm

•

733634-B & N Size 16X225mm

•

LABOUR COST : Ordinary Soil

•

Same as above but erection of RCC/PCC/PSC poles of 7.5 to 8 mtr long in pit of 1.5 mtr depth.

•

Fixing of 4 Pin cross arm with insulator and Braces fixing

•

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

•

Providing spiral earth electrode type earthing along with pole (without charcoal, salt etc.)

•

Stringing of conductor wren, squirrel, weasel, binding of onductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps.

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Notification of KKRDB PIPELINE WORKS.pdf

Others - TENDER NOTIFICATION • 0.72 MB

Conditions of PIPELINE WORKS 2026-27.pdf

Instructions to Tenderers • 1.55 MB

YAKTAPUR DESIGN.pdf

Design Document • 0.44 MB

KW-3 YAKTAPUR - 9990.docx

Tender Document • 0.40 MB

00 loc.docx

Others - FORAT OF LINE OF CREDIT • 0.01 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Somanagouda B Karekall

₹53.8 Laccepted-aoc