Construction of Female Jail Superintendent Residence Mahila Mandal Kara in the campus of Shahid Jubba Sahni Central Jail ,Dist. - Bhagalpur.

Earth work in excavation in foundation trenches or drains(not exceecing 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kind of soil.

Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed.

Extra for every additional lift of 1.5 m or part thereof in

Supplying and filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Providing designation 100 A one brick flat soling joints filled with local sand inciuding Cost of watering taxes, royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of layıng but excluding the cost of centering, shuttering, finishing and including retard setting of concrete, improve workability without impairing strength and admixtures in recommended proportions as per IS: 9103 to accelerate,reinforcement,durabiity as per direction of Engineer-incharge.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of entring,shuttering,finishing and reinforcement-All work puto plinth level

Brick work with fly ash bricks as per lS 12894(2002) & 1S 3495 in foundations and plinth in

Cement mortar 1: 4 (1 cement: 4 coarse sand)- th Brick work and upto plinth

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth and superstructure

Cement mortar 1:6 (1 cement: 6 coarse sand ) - 250 mm and 125 mm th Brick work in superstructure

Brick work with fly ash bricks as per lS 12894(2002) & 1S 3495 in foundations and plinth in

Cement mortar 1: 4 (1 cement: 4 coarse sand)- th Brick work and upto plinth

Brick work with bricks of class designation 100A in foundations and plinth in :

Cement mortar 1:6 (1 cement: 6 coarse sand )

Half brick masonry with bricks of class designation 100A in foundations and plinth in :

Cement mortar 1:4 (1 cement: 4 coarse send)

Providing and fixing M.S.fan clamp type I or ll of 16 mm dia. M.S, bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop,all as per standard design complete.

Centring and shuttering including strutting. propping etc. and removal of form for:

Reinforcement for RCC work including straightening. Cutting. bending, placing in position and binding all complete.

TMTC-500- 8mm dia

TMTC-500- 10mm dia

TMTC-500-12 mm dia.

TMT FE-500-16 mm dia.

TMT FE-500-20 mm dia.

12 mm cement plaster of mix

6 mm cement plaster to ceiling of mix.

Cement plaster in course sand

Providing and laying vitrifed floor tiles in different sizes {thickness to ben specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joint with white cement and matching pigments etc., complete

Size of Tile 600x600 mm

Providing and laying Vitrified tiles in dífferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622,of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (Thickness to be specified by the manufacture) of pproved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Motar 1:3 (1cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS: 15622 of approved make in colours such as white, Ivory, Grey, Fume Red, Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete

Providing and fixing 18mm thick gang saw cut ,mirror polished premoulded and prepolished, machine cut for kitchen platforms,vanity counters, window sills, facias and similar locations of required size approved shade,colour and texture laid over 20mm thick base cement morter 10:4 (1 cement : 4 coarse sand ) joints treated with white cement,mixed with matching pigment,epoxy touch ups,including rubbing,curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Providing and fixing M.S. grills of required pattern in frames of windowS etc, with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Providing and fixing steel glazed doors,window and ventilatrs of standered rolled steel sections,joints mitered and welded with 15 x 3 mm lugs 10cm long with steel lugs embedded in cement concrete blocks 15x10x10cm of 1:3:6(1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) or with woodenplugs and screws or raw plugs and screws or with fixing dips or with bolts and nuts as required,including providing and fixing of glass panes with glazing dips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer excluding the cost of metal beading and fitting except necessary hinges or pivots as required.

Providing and fixing angle iron frames for doors, windows and ventilators of kg.101.30 mild steel Angle sections of size 35x35x5.mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary but hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer_In _charge.

Providing and fixing panelled or panelled and glazed shutters for doors,window and clerestory windows,including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately all complete a per direction of Engineer -in-charge.

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings complete including applying a priming coat of approved steel primer.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete.

Providing and fixing bright finished brass handles with screws etc. complete.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete.

Providing and fixing aluminium tower bolt ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.

12 mm cement plaster 1:4( 1 cement: 4 coarse sand) finished with a floating coat of neat cement.

Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Base with 1:1:1 (1 lime:1 surkhi: 1 coarse sand ) /1:4 (1 cement: 4 coarse sand )

Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm

12 mm cement plaster of mix

1:4 (1 cement:4 coarse sand)

Rough cast plaster with a mixture of sand and gravel or crushed stone from 2.36 to 12.5 mm nominal size dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:5(1 cement:5 coarse sand ) and top layer 10 mm cement plaster 1:3(1 cemeht;3 coarse sand) mixed with 10% finely grounded hydrated lime by volume of cement:

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicon additives of required shade of required shade :

New work (Two or more coat applied @ 1.43 Ltr/10 sqm over and including priming Coat of of exterior primer applied @2.20 kg/10 sqm)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.

Applying priming coat

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade

Bricks (lead - 1 km kutcha + 7 km pucca)

Coarse Sand

Stone Chips

Local sand (1 km kutcha + 2 km pucca)

Steel

Cement

Cement

Bricks

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominalsize) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.

Meter

Meter

Meter

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.

Meter

Meter

Providing and fixing brass bib cock of approved quality :

Providing and fixing brass stop cock of approved quality :

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required :

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting,of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

Meter

Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete