SPECIAL REPAIR TO TOILET IN BLDG OTM P-92,93,94 80 AND P-81 OF BRAVO AND CHARLIE COMPANY, AT FEL, MCEME UNDER GE MCEME SECUNDERABAD

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing srviceable tiles to store and rubbish off the premises complete all as apecified and directed.

M&L Anti-skid / Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as apecified and directed.

M&L for 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes complete all as apecified and directed.

M&L glazed ceramic coloured tiles 450x 300x 6 to 7mm thick on vertical surfaces such as dados, wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces complete all as apecified and directed.

M&L Rendering 10 mm thick in CM (1:4) finished rough to receive wall tiles complete all as apecified and directed.

Taking down plastering in cement mortar on brick or stone wall/ ceilings etc including racking out joints hacking for key scrubbing down with water etc.complete all as apecified and directed.

M&L for rendering 10mm thick cement plaster 1:6, including finishing even and smooth without using extra cement on internal faces complete all as specified and directed.

M&L for rendering 15mm thick in two coats (10 mm thick in cement plaster 1:6 and 5mm thick in cement plaster 1:4 mixed with integral water proofing compound as per manufacturer instruction),on fair faces of brick work or concrete surfaces finish even and smooth without using extra cement all as specified and as directed ( water proofing compound will be measured separately)

M&L for rendering in cement mortar 1:3, 5 mm thick including finishing the surfaces even and smooth without using extra cement on ceiling complete all as apecified and directed.

M&L for three coats of white wash to ceiling surfaces including preparation of new surfaces complete all as apecified and directed.

M&L for preparation of new plaster surface of wall and applying two coats of white wash over a coat of primer complete all as specified and directed

M&L for preparation of old surface of ceilings and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying one coat of white wash , complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames not exc 1.5 sqm each(without taking off shutters from the frames), etc complete all as specificed and as per directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm each but n.exc. 4 sqm each complete all as apecified

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as apecified and directed.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc of size 125 x 60 mm complete all as apecified and directed.

S&F mild steel flat iron size 25x3 including necessary cutting and bending etc as required as in hold fasts complete all as apecified and directed.

M&L Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as apecified and directed.

M&L for 35mm thick flush shutter,solid core construction with block board core and plywood face panels,commercials type on both sides complete all as specified and directeb by Engineer in Charge

S&F for glazed and skeleton shutters 35 mm thick 2nd class hard wood open rebated and prepared to receive gauze etc (without sash bars)edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, gauze etc , sizes of memebres of shutters as specified in SSR Part-I section 8 clause 8.20 (a)( wire mesh doors) Supply and fitted to chowkats complete all as apecified and directed.

M&L PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in filling in door frame complete all as specifed and directed.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as apecified and directed.

S&F 100 mm long MS butt hinges with galvanised mild steel hinge pin anodised and fixed complete all as apecified and directed.

S/F 150mm size aluminium anodised handles, fabricated type complete all as apecified and directed.

S/F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as apecified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as apecified and directed.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as apecified and directed.

M&L for two coats of synthetic enamel paint over a coat of primer including preparation of new wooden surface of any description over 10 cm width and girth complete all as apecified and directed.

M&L for two coat of Synthetic enamel paint over a coat Zinc chrome primer, including Preparing new steel surfaces any description, over 10 cm width or grith,not otherwise described complete all as apecified and directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of Synthetic enemal paint, complete all as specified and directed by Engr-in-Charge.

M&L for one coat of synthetic enamel paint including preparation of old wooden surface of any description over 10 cm width and girth complete all as apecified and directed.

S/F Stainless Steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless Steel wire staples along with frame work of windows / ventilators with all necessary arrangements complete all as specified and as directed.

S/F in repair Stainless Steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless Steel wire staples along with frame work of windows / ventilators with all necessary arrangements complete all as specified and as directed.

Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as apecified and directed.

M&L for 4 mm thick,Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane,complete all as apecified and directed.

S&F Mild Steel helical door spring 300 mm long with roller and roller plate complete all as apecified and directed.

S&F in repair vitreous china EWC white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F in repair under counter wash hand basin oval shaped white in colour of size 515x420x200mm of model GENEVE N C0441 of parryware or equivalent in Hindware, with PVC connection 15mm dia including all accessories complete all as specified and directed by Engr-in-Charge.

S&F in repairs, PVC low level flushing cistern 10 litres capacity complete all as apecified and directed.

S&F in repairs soap dish, vitreous china white, approximate size 160 x 160 x 90mm, fixed to plugs with chromium plated brass screws all as specified and as directed.

S&F CP brass tubular towel rail 600mm long 20mm dia 'D' type in repairs complete all as apecified and directed.

S&F in repairs for low density polythelyne pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to wall or in floors etc. as in outlet pipe for WHB etc. 32mm bore complete all as apecified and directed.

Taking up or down steel tubing & connections, 15 mm dia complete all as apecified and directed.

Taking up or down steel tubing & connections, 20 mm dia complete all as apecified and directed.

S & F 15mm dia. Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as apecified and directed.

S & F 20mm dia. Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as apecified and directed.

Cutting chases ,pinning in making good to facing where required of brick walls and pointed in cement mortar 1:3 for concealed water tubing etc cutting not exc 10 cm girth complete all as apecified and directed.

S&F in repairs 15mm bib taps fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferule and fixed complete all as apecified and directed.

S & F in repairs, CP 15mm, stop valves/ angle cock, fancy type cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe complete all as apecified and directed.

Ditto. As per item no 51 above but fancy type, chromium plated with long shank and cup (concealed type) complete all as apecified and directed.

S & F in repair fancy typ Pillar taps 15mm dia cast copper alloy with capstion heads, chromium plated , fancy type screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm dia pipe complete all as apecified and directed.

S&F 15 mm dia 600 mm long PVC water connection with PTMT nuts and washers complete all as apecified and directed.

S&F CP shower rose 125 mm size with swivel joint fixed in repairs complete all as apecified and directed.

S&F 20 mm bore dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 210gms) complete all as apecified and directed.

S&F in repairs110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and laid in trenches and under floor etc incl taking down old pipes complete all as apecified and directed.

S&F in repairs 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and laid in treanches and under floors etc incl taking down old pipes complete all as apecified and directed.

S&F 110mm PVC (SWR) bend any radius complete all as apecified and directed.

S&F 75 mm PVC (SWR) bend any radius complete all as apecified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent to waste pipe fixed in cement concrete type B-1 (1:2:4), 75 mm dia outlet complete all as apecified and directed.

S&F PVC (SWR) 'P’ trap 110 mm dia including all fittings complete all as apecified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as apecified and directed.

S&F 110 mm PVC (SWR) vent cowl complete all as apecified and directed.

S&F in repairs for low density polythelyne pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to wall or in floors etc. as in outlet pipe for WHB etc. 40mm bore complete all as apecified and directed.

S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden / plastic cleats (Minimum weight 300 gms)complete all as apecified and directed.

Demolition of Concrete in sunken floors and pavings exc 15 cm thickness (below or above ground level) otherwise specifically provided complete all as directed by Engineer in charge

M& L Rendering15 mm thick in CM (1:3) on sunken concrete floor surfaces mixed with integral water proofing compound finished even and smooth without using extra cement complete all as apecified and directed . Note WPC shall be measured & paid separately

M&L for providing and applying brush applied water based PU dispersed polymer modified Elastomeric liquid membrane, ShaliUrethane BTD with Zero VOC or of any approved make-STP/Fosroc/BASF to form the membrane in situ at site with 3 layers of monolithic, seamless finish having >500% elongation. The first layer is to be formed mixing with clean water in the ratio of 1:1 @ 400 Gms per Sqm and shall act as the prime coat to fill in the cavities. This can be brush or roller applied. For spray application, using any airless spray system with recommended nozzle size at 30:1 at 2 bar pressure. Providing and applying the second coat @ 1 kg per Sqm using the soft brush, roller or spray system with the recommended nozzle size on to the primed surface. Providing and applying 50 Gsm fiber cloth over the 1st coat, when substrate till the coat is tacky. Providing and applying 3rd coat @ 1kg/Sqm to finish the application for a thickness of 1.5mm membrane formed in place. The second coat should be applied perpendicular to the first coat for cross linkage and complete as per the specification and all as directed.

M& L for 25mm thick PCC 1:2:4 type B-I using 20 mm graded stone aggregate as in foundation,filling in sunken portions and mass concrete complete all as specified and directed by engineer in charge

M&L for PCC type E-2, 1:5:10 (using 40mm graded aggregate) as in filling and mass concrete as in sunken floors complete all as apecified and directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / Hylam sheet/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as apecified and directed.

Taking down unserviceable sub main wiring of any size two/foue single core including earth wire and PVC conduit/ casing capping and removing materials from site and making good the disturbed surface of wall etc complete all as specified and directed

Material and labour for point wiring in concealed conduit with single core PVC insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked of suitable dia conduit wiring in walls/PVC conduit on wall including Tee, Junction boxes and provision of 2.0mm thick MS terminal boxes duly painted with red oxide metal primer and covered with 3 mm thick sheet cover of suitable size including suitable screws with washer for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly complete all as specified & as directed for One tube light/exhaust fan/bldg security light point controlled by one, one way switch 5 amps, SP

All as per item No. 74 above but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as apecified and directed.

All as per item No. 74 above but for one 3 point 5 Amps switch socket outlet point controlled by other switch on the same board complete all as apecified and directed.

All as per item No. 74 above but using 4.0 Sqmm single core copper conductor cable multistranded PVC insulated unsheathed 1100 volts grade for 3 pin 15 Amps switch socket combination point including running 4.00 Sqmm copper conductor PVC wire as earth continuity conductor on independant board complete all as apecified and directed.

Supply and fixing of switch piano , single pole one way, flush type 5 Amps capacity 230 volts complete all as apecified and directed.

Supply and fixing of switch socket combination 2 in 1 multipurpose 2/3 pin 5 amps flush type complete all as apecified and directed.

Supply and fixing of socket outlet 2 in 1 multipurpose 2/3 pin 5 amps flush type control by other switch complete all as apecified and directed.

Supply and fixing switch socket combination 2 in 1 multipurpose 3pin 5/15 amps flush type complete all as apecified and directed.

Supply and fixing of ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as apecified and directed.

Material and labour for existing surface/ recessed PVC conduit wiring with 2 runs of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade including one run of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified and as directed.Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured as one unit length.

Supply and replace MCB double door DB SPN 8 way with 200 Amps busbar including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface complete all as apecified and directed.

Supply and fix in repair MCB SPN 32 Amps 240 volts for fixing on MCB DB complete all as apecified and directed.

Supply and fix in repair MCB SP 6 to 32 Amps 240 volts for fixing on MCB DB complete all as apecified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old light fitting all as specified and directed .

Supply and fixing exhaust fan 300 mm sweep, iron body heavy duty single phase 50 Hz, 1400 rpm AC with louver and connecting up with and including provision of PVC insulated copper flexible cord of size 23/0.019, 3 core electric connection from ceiling rose exhaust fan and old unservoceable deposite to MES store yard complete all as apecified and directed.

G.MADAN MOHAN

LAKSHMI NARASIMHA ENTERPRISES

Vara Enterprises

AMK Builders

NEWS CONSTRUCTIONS

SAI RUPA CONSTRUCTIONS