REPAIR/ MAINT OF BLDG SECURITY LIGHT POST TOP LANTERN AND MISC WORKS IN ZONE A B AND C AREA UNDER GE (WEST) LUCKNOW

Taking down carefully existing aluminium or copper point wiring (light, fan, socket, bell or power) including all associated fixtures and fittings such as switches, ceiling roses, regulators, sockets, lamp/angle holder etc and making good the disturbed surfaces to an even and smooth finish using cement mortar 1:3 and applying white/colour wash to match the existing surface complete all as specified and directed.

S&F for point wiring complete one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn through and including surface type caping & casing not less than 25 mm wide, including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable of green colour as a earth wire connected to common earth dolly, etc including pressed steel terminal box of suitable size with laminated white top sheet cover of 3.00 mm thick complete all as specified and directed.

S&F in replacement switch piano flush button single pole one way 6 Amp 240 volt complete all as specified and directed.

S&F in replacement LED Building security light 20/25 Watt with high power LED source (>120 lumen/watt) PDC housing, IP66 and IK 10 with 4 KV inbuilt surge protection, minimum 50000 burning hours hv cut off @325/440 volt protection for 8 hours including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed.

S&F in replacement of bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 9/10 W LED, 6000K, 100 lumens/watt including inbuilt electronic driver complete all as specified and directed.

S&F in replacement of Smart Glow 2x2 PANEL SENSOR LIGHT recessed/surface type is an intelligent office lighting system with an inbuilt sensor thus avoids unwanted hassle of creating space for sensors. The inbuilt sensor helps save additional 40%* energy as compared to other LED panels. The luminaire also provide 360Deg coverage around 8 ft area, High on aesthetics, Smart Glow delivers superior performance, is easy to install and has a long life of 50,000 hours (L70B50). It also has very good payback period of less than 1.5 years, System wattage: 37W with system lumen of 3700lm, system efficacy>100lm/watt, Housing made with CRCA material, high transmittance PC diffuser to provide uniform light intensity distribution, IP20, THD<10%, available CCT: 4000K/5700K/6500K, CRI>80, PF>0.90, Operating voltage: 220-240Vac at rated frequency of 50Hz. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval. including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed.

S&F in replacement LED 35-40 watt light pureline slim suspended 50mm with suspended (hanging type) accessories CRCA WHITE POWDER COATED, 50000 BURNIG HOURS, IP20 and LK02 linear lighting luminaries with superior white powder coated finish, multiply option options of lights distrubution run length and luman packages for diffrent application to choose white colour higher energy saving decorative ultra slim square profile LED lighting fixture enviromental friendly, energy efficient complete all as specified and directed.

S&F in replacement LED building security light of 35/36W Led Street Light made up of pressure die cast aluminium housing with Polycarbonate cover and unique road optics  for better uniformity. The luminaire shall be with higher ingress protection IP66 and impact resistance of IK10, Operating voltage range: 140-270V/50Hz, Lumen efficacy of LED >120Lm/W,  CRI≥70, CCT-5700K, & SDCM<5.minimum 50000 burning hours Powered by built-in potted LED driver of same make gives constant light over wide voltage range shall have High Voltage cut-off@325V & safety from 440V (P2P) for 8 hours. Surge  protection 4 kV, Power factor ≥0.95, THD ≤10 including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 32/40 mm dia 1.20 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and directed.

S&F in replacement PVC gang box 1 way, suitable for fitted piano type 6A switch, 230 Volts complete with pvc gitties and screws complete all as specified and directed.

S&F in replacement switch piano flush button single pole one way 6 Amp 240 volt complete all as specified and directed.