Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.2 LAccepted-AOC WARD NO 4 NEAR MASZID BHATTAGAON DISTT JHANSI 284001 UTTAR PRADESH | JHANSI | UTTAR PRADESH | 284001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹26.6 L+₹3.9 L (17.2%)Rejected-AOC 756 17 DADIYAPURA NANDU COLONY JHANSI 284001 | JHANSI | UTTAR PRADESH | 284001 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹30.3 L+₹7.7 L (34.0%)Rejected-AOC C 204 NANGLI EXTN NEW DELHI | WEST | DELHI | 110043 | L3 | Rejected-AOC Rejected |
Tender Value
₹27.7 L
EMD Value
₹55,340
Closing Date
31 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE JHANSI
HQ CWE JHANSI
SPL REPAIR TO BLDG NO 08 AT NOWGONG (BKD) UNDER GE JHANSI
2022_MES_560459_2
CWE/JHA/J/TOKEN/32 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
JHANSI
As per tender documents
9 documents required · 9 mandatory
₹500
GE JHANSI
₹55,340
Yes
1 Feb 2023
10 Dec 2022
7 Jan 2023
10 Dec 2022
31 Dec 2022
19 Dec 2022
Amount
Taking down chowkhats with shutters (without taking off shutters from the frame) area not exc. 1.5 Sqm each, and removing from site complete all as specified and directed.
All as per Ser item No 01 but area exceeding 1.5 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified and directed.
Taking down steel tubing with and incl connections, of 15 mm dia bore, complete all specified and directed.
All as per Ser item No 03 but for pipe of 20 mm dia bore size complete all as specified and directed.
Dismantling of wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/ slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.
Demolition of brick work built in cement or lime mortar, complete all as specified and directed.
Taking down cement or lime plaster of any description on bricks, stone and concrete surface of wall etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
Demolition of cement concrete terrazo (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.
Disconnecting water tank exc 250ltr but not exc 500ltr of any description and removing from site complete all as specified and directed.
Dismantling timber scantling 40 Sqcm and over in section in any position as in framed / unframed works such as roof purlins, rafters, fillets, ridges etc as in ceiling, complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises, complete all as specified and directed.
M&L for cutting chases, pinning in for concealed water tubing, not exc 10 cm girth and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc complete all as specified and directed.
M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc with and incl all metal works, complete all as specified and directed. (Fe290, grade 65).
M&L for box type steel ventilator with 80x40x1.25mm MS tubular frame partly gauged with top hung shutter with and incl grill using 12mm square bars @ 10Cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars dovetailed and welded complete all as specified directed. Note:- (a) The Glass / gauze shell be measured and paid separately. (b) Top hung Z-Section shutter shall be of size 22mm x 22mm x 20mm thick.
M&L for box type steel window with 80x40x1.25mm MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and incl grill using 12 mm square bar @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars doweled and welded complete all as specified directed. Note:- (a) The Glass / gauze shell be measured and paid separately. (b) Side hung Z-Section shutter shall be of size 22mm x 22mm x 20mm thick.
S&F of solid PVC door frame of size 50 mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing, complete all as specified and directed.
S&F factory made solid PVC moulded door shutter 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick Wooden texture moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing, complete all as specified and directed.
S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed.
S&F 150 mm long aluminum anodised handles fabricated type, complete all as specified and directed.
S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed with MS wooden screws, complete all as specified and directed.
S&F 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
S&F for 35mm thick 2nd class Hard wood glazed and skelton shutters as in Doors open rebated and prepare to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24 (a) complete all as specified and directed.
S&F of 35mm thick flush doors, solid core construction, with particle board core and prelamination on both sides, complete all as specified and directed.
S&F of 25mm thick flush shutter for cup board door/shelves, solid core construction with block board core and plywood face panels commercial type on both sides etc with and incl min 5 mm thick wooden beading fixed all around complete all as specified and directed.
S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed MS wood screws, complete all as specified and directed.
S&F 75mm Butt hinges, medium weight, cold rolled mild steel, and fixed MS wood screws, complete all as specified and directed.
S&F mild steel 200mm long barrel tower bolts, stove enamelled black, with bright bolt, fixed MS wood screws, complete all as specified and directed.
S&F 150mm Mild steel pressed handle oval type stove enamelled black complete all as specified and directed.
S&F mild steel 200mm sliding door bolts plate type stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, complete all as specified and directed.
S&F mild steel 300mm ordinary rat tail rod pattern springs including roller, roller plate, complete all as specified and directed.
S&F Floor door stopper 150 mm of extruded aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.
S&F in replacement of stainless steel wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with steel beads to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed.
S&F of 3mm thick sheet glass ordinary quality glazing with oil putty or beads in square n. exc 0.5 Sq mm in each pane complete all specified and directed.
S&F of 3mm thick figured glass pin headed glazing with oil putty or beads in square n. exc 0.5 Sq mm in each pane complete all specified and directed.
M&L for medium grade galvanised steel water tubing with and incl all fittings and fixtures, fixed to wall or laid in floors for 15 mm bore, concealed or exposed, complete all as specified and directed.
M&L for medium grade galvanised steel water tubing with and incl all fittings and fixtures, fixed to wall or laid in floors for 20 mm bore, concealed or exposed, complete all as specified and directed.
S&F of PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, with and incl all type of fitting i.e. tee, bend, junction etc, complete pipe duly fixed to wall or laid in trench, complete all as specified and directed.
S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and directed.
S&F of PVC nahani trap 75 mm dia including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.
S&F in replacement of 1st quality vitreous china wash hand basin, white flat/angle back, size 550x400mm, complete including necessary cutting for and pinning in ends of brackets) with and including wall brackets, PVC waste pipe of 750mm long, CP waste coupling of 32mm dia size, complete all as specified and directed.
S&F in replacement of 1st quality vitreous china squatting pan Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet (exluding flushing cistern and flush pipe) including lime concrete bedding, complete all as specified and directed.
S&F of 10 ltr capacity PVC valve less symphonic action type flushing cistern, white, with inlet ball valve, float and handle with and including wall bracket, 32 mm dia PVC flush pipe and connected to squat pattern / pedestal pattern water closet, including all joints and making good to the wall & floor,complete all specified and directed.
S&F in replacement of bib tap, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as specified and directed.
S&F in replacement of long body bib tap, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as specified and directed.
S&F in replacement of pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, complete all specified and directed.
S&F in replacement of Stop cock with long shank and cup (concealed type), 15mm dia with wall flange, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe / unions, complete all as specified and directed.
S&F in replacement of angular stop cock 15 mm dia with wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed.
S&F in replacement of towel rail 600 mm long including wall bracket made of cast copper alloy, chromium plated, complete all as specified and directed.
S&F in replacement of overhead shower of dia 125 mm round shape single flow, ABS body chrome plated fancy type, with and incl swirl type shower arm of 20mm dia with wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed.
S&F in replacement of PVC connection 450 x 15mm dia PTMT (PVC), complete all as specified and directed.
S&F in replacement of Brass CP connection 15mm dia and 45cm long with 2 Nos brass check nuts with washers for geyser, complete all as specified and directed.
S&F in replacement of stainless steel sink, 1.00 mm thick for kitchen with plug, with and incl 40mm dia CP waste coupling, waste pipe of 750mm long, washers, cantilever brackets, connecting union etc overall approx size 915 mm x 460 mm with approx bowl size of 410 mm x 330 mm x 160 mm etc, complete all as specified and directed.
S&F in replacement of stainless steel kitchen plate rack made out of imm thick sheet of size 765x920mm and 220mm deep, weight not less than 7 Kg, complete all as specified and directed.
S&F in replacement of SS grating of squre/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as specified and directed.
S&F 20 mm dia curtain rod wih and incl wooden texture SS and caps/ lobs and SS wall mounting brackets, complete all as specified and directed.
M&L for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed.
M&L for 1.6 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and directed.
Dismantling Asbestos Cement Corrugated or Semicorrugate in Roof covering, complete all as specified and directed.
S&F of pre-painted 0.5mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed.
S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed.
M&L for cement concrete chequered tiles of size 30x30cm, 20 to 22 mm thick, machine pressed, laid as in floor over and including 15 mm thick screed bed in C M 1:4, set and jointed and pointed with neat cement slurry and pigment, complete all as specified and directed.
M&L for brick work with fly ash lime bricks (FALB) conforming to IS 12894 size 230x110x75 mm, (strength M-10), straight or curved on plan exc 6m mean radius built in cm (1:6), complete all as specified and directed.
M&L for rendering 10mm thick plastering in 1:6 CM for internal surface of wall and finished even and smooth withouting using extra cement complete all as specified and directed.
M&L for 40mm thick 1:2:4 type B1 Using 20 mm graded stone agg as in flooring, complete all as specified and directed.
M&L for PCC 1:2:4 type B1 Using 20 mm graded stone agg as in lintels upto 1.5m clear span, cills, steps; seismic and other similar works, complete all as specified and directed.
M&L for PCC 1:4:8 type D2 as in sub base of flooring complete all as specified and directed.
M&L for joint free, ceramic coloured tiles of size 600x600mm, 8 to 10 mm thick (square/rectangular), in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.
All as per item No 68 but in skirting complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 300x 450mm, 7 to 8 mm thick on vertical surface, such as in dado over 10 mm thick rendering in CM (1:4) complete all as specified and directed.
M&L for semi skid ceramic color tiles of size 300x300mm, 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and directed.
M&L for Marbel green slab 16 to 18mm thick over 15mm thick cement screed bed cm (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab with and including moulding, rubbing & polishing, complete all as specified and directed.
M&L for preparing new surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preperation of old surfaces of wood or wood base materials of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat red oxide primer complete all as specified and directed.
M&L for preparing old steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and directed.
M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping, watering and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer on old plastered surface of external wall, complete all as specified and directed.
M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping, watering and applying two coats of oil bound distemper over and incl one layer of white wall care putty to get level and smooth surface on old plastered surface of internal wall, complete all as specified and directed.
M&L for preperation of new plastered surface and applying three coats of white wash on newly plastered surfaces of ceiling complete all as specified and directed.
M&L for preperation of old plaster surface and applying one coat of white wash on ceiling surface complete all as specified and directed.
S&F 2nd class Hard wood plain solid straight chowkhats, framed rebated on the solid rounded or chamfered , put to gether with glue, pinned at joints complete all as specified and directed.
M&L 15mm thick rendering (1:4) on fair/other than fare face of wall, finished even and smooth without using extra cement complete all as specified and directed.
M&L 5mm thick rendering cm (1:3) on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate, as in plinth protection and path laid in alternate panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints and filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface finished sub base, complete all as specified and directed. Note : The quoted rates are deemed to be inclusive of form work and joint fillings.
S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 25mm size, suspended at 1200mm C/C and cross T runner of 25mm size suspended at 600mm C/C supported by 4mm dia GI wire from roof/Slab/truss incl wall/perimeter runner/channel of 15 mm size with and incl 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed.
Demolition of reinforced concrete in roof, floor (Other than ground floor), beam, chajjas and similar suspended work, complete all as specified and directed.
M&L for reinforced concrete, 1:1.5:3 type B1 Using 20 mm graded stone agg as in slabs supported on walls, beams and columns in roofs / floors, chajjas, balconies etc and similar works, complete all as specified and directed.
M&L for formwork to sides and soffits of suspended slab i.e. chajjas, balconies, roof etc and similar works not exc 200mm thick, complete all as specified and directed.
M&L for TMT bar 10mm dia, cut to length, bent to shape as required including cranking bending spirally for hooping for columns, slab etc with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to as per SSR Pt-I, complete all as specified and directed.
All as per Ser item No 90 but TMT bar of 8mm dia size complete all as specified and directed.
S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, complete all as specified and directed.
S&F in replacement of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in replacement of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as specified and directed.
Removing existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete, existing plaster lime cova / mud phuska/cement concrete/lime cova etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in padding levelling etc and roof kerbs, complete all as specified and directed.
M&L for 10 mm thick rendering in CM (1:4) mixed with water proofing compound @ 0.20 Ltr/bags on roof surface when concrete is green, complete all as specified and directed. (Note:- WPC shall be measured and paid separately)
Supply only integral liquid water proofing compound, mixed in CM as per manufacturer instruction, complete all as specified and directed.
M&L water proofing treatment to roof slab with APP based modified polymeric membrane centre core 100mm microne HMHDPE outer flim 20 micron each having thickness 3 mm weight not less than 3kg/Sqm with 100mm overlap laid as per manuacturer's instructions complete all as specified and directed with following course of description below:- (a) 1st coat applying bitumen primer confirming to IS-3384-1965 @ 0.40 Kg/Sqm to be applied on prepared roof surface till the surface is properly impregnated. (b) 2nd coat of bonding material using blown type bitumen conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm. (c) 3rd course ie. laying of APP Based modified membrane described herein before with 100mm overlap in longitudinal direction and 100mm in transverse direction, all joints and changes in all direction should be covered covered with cement mortar (1:3) mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. (d) Forth course of bounding materialusing blown grade bitumen 85/25 conforming to IS-702 @ 1.20 Kg Per Sqm. (e) Applying one coat of bituminious aluminium paint @ 0.20 Kg Per Sqm over APP membrane.
Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switches, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawal plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.
M&L for point wiring complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm, 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fan etc at one end and to common earth dolly at other end, complete wiring drawn through & including concealed medium grade, ISI marked, non metallic PVC conduit of 20 mm dia size with and incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, covered with & incl 3 mm thick bakelite, laminated hylem sheet top cover suitable for fixing of piano type switches / sockets / fan regulator etc, with and incl cutting chasing and making good of disturbed surface of wall / ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as specified and directed for following :- (Note : 1. The cost of MS sunken box with 3 mm thick bakelite, laminated hylem sheet top cover is deemed to be included in quoted rate. 2. In case cutting & chasing of conduit is encountered with any beam / column, the PVC casing & capping or surface conduit will be used to avoid any damage to the RCC portion. 3. No cutting & chasing shall be done on ceiling surface for laying PVC conduit for ceiling fan point wiring etc, hence the PVC casing & capping or surface conduit will be used for the same.
One light / fan / bell / buzzer / exhaust fan point controlled by 01 no, 6 Amps one way switch.
All as per item No. 101 above but for one 6 Amps, 2-in-1 switch socket out let flush type on the independent board complete all as specified and directed.
All as per item No 101, but for one Switch socket 6 Amps, 2-in-1 on same board complete all as specified and directed
All as per item No. 101 but with 2.5 Sqmm copper conductor cable along with one run of 2.5 Sqmm copper conductor cable green in colour for continuous earthing for One 16Amps socket point on the independent board controlled by one switch complete all as specified and directed.
Supply and fix in replacement switch piano flush type 6 Amps, one way, 240V, 50Hz complete all as specified and directed.
Supply and fix in replacement socket 6 Amps, 2-in-1 flush type universal 240V, 50Hz complete all as specified and directed.
S&F, in repalcement, of Switch piano type, single pole, one way, 16 amps, 240 volts, complete all as specified and directed.
S&F, in repalcement, of Socket, 6 pin, 16 Amp, , 240 volts, complete all as specified and directed.
S&F, in repalcement of angle/batten type Lamp holder, metal cased, bakelite body, 240 volts, complete all as specified and directed.
Supply and fix in replacement ceiling rose 6 Amps, 3 plate, 240V, 50Hz complete all as specified and directed.
Supply and fix in replacement of Bell push switch single pole, one way 6 Amps, 240V, 50Hz complete all as specified and directed.
Supply and fix electronic fan regulator rotary type in 5 steps, 240V, 50Hz complete all as specified and directed.
S&F, in replacement, of electric bell of DINGDONG type, 6 Amps, 240 volts, single pole and making all necessary connections, complete all as specified and directed.
M&L in replacement sub main wiring with 2 run of 4 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 15 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. Note : 1. The cost of concealed conduit & accessories is deemed to be included in quoted rates. 2. The two run of 4 Sqmm wire and one run of 4 Sqmm wire will be measured as one unit.
Supply and fix in replacement LED street/security light fitting 25 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including GI pipe bracket made up of 40mm dia light grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable of size 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and directed.
Supply and fix in replacement LED batten with CRCA sheet steel body box type pre-wired suitable for and including provision of 1x20 Watt (4 feet) retrofit LED tube with PC body, full white and connecting up with twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed.
S&F of LED light fitting 1 X 10 watt (2 feet), decorative ultra slim type, with integral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed.
S&F in replacement bulk head fittings complete with deep drawn anodised aluminium body epoxy white/grey powder coated heat resistant prismatic glass clear suitable for retrofit type LED bulb of 09 watt with and incl retrofit type LED bulb of 09 watt, fixing on wall complete all as specified and directed.
S&F ceiling fan, 1200mm sweep size, with and incl down rod, ceiling clamp, rubber real, set of 03 blades, 02 nos canopy, metal body, double bearing,energy saving rated and making all necessary elect connection and depositing old unserviceable fan in E/M yard, complete all as specified and directed.
S&F in replacement of exhaust fan of 300 mm sweep size, heavy duty type, double ball bearing complete with and incl self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 volts single phase, 50 Hz, AC supply and fixed by using 4 Nos 50 mm long MS fasteners, nuts & washers and making all electric connection with three core PVC insulated, PVC sheathed copper conductor flexible cable 24/0.2 mm and depositing old unserviceable fan in E/M yard, complete all as specified and directed. Note : 1. The cost of making hole in the existing wall and making good the disturbed surface of wall/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required is deemed to be included in the quoted rate.
S&F in replacement of MCB protected modular type AC/Geyser box complete with and including 6 pin socket, plug top, modular cover plates, mini MCB SP 25 Amp capacity, fixed on concealed modular type metal flush box of suitable size, complete all as specified and directed.
Supply and fix in replacement MCB distribution board, SPN, 8 way in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Note: (i) MCBs shall be measured and paid separately.
Supply and fix in replacement MCB distribution board, TPN 4Way in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Note: (i) MCBs shall be measured and paid separately.
S&F in replacement MCB TPN 63 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
S&F in replacement MCB SPN 40 amps 240 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
S&F in replacement MCB SP 06 to 32 amps 240 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
S&F in replacement of MCB, C Curve type, 10 kA, 40 to 63 Amp, Single Pole with over load and short circuit protection, complete all as specified and directed.
S&F of GI pipe of 40 mm nominal dia light grade fixed to poles with clamps nuts, bolts and washers or laid under road crossing or fixed to wall, complete all as directed. Note : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall be inclusive in the item rate.
M&L for sub main wiring with 2 run of 6 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 15 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. Note : 1. The cost of concealed conduit & accessories is deemed to be included in quoted rates. 2. The two run of 6 Sqmm wire and one run of 6 Sqmm wire will be measured as one unit.
M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tmt bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as specified and directed.
Material & Labour for Power Cables, Aluminum Stranded Conductor XLPE Insulated Of size 25 Sqmm 4 core, Cores laid up, PVC Inner sheathed, Armoured with galvanized wire or galvanized steel strip, overall PVC Sheathed, 1100V Grade as per IS 7098(Part 1) 1988 complete laid in trenches / floors / fixed to poles / walls / drawn through pipes etc including provn of lugs, glands, nuts, bolts & washers etc for connecting in LT feeder pillar box / transformer bushings / connecting overhead lines with suitable binding wire and testing on completion complete all as specified and directed. (Note: Excavation, earth work and protection pipe etc shall be measured and paid separately under relevant items of schedule.)
All as per Ser item No 131 but for cable size of 16 Sqmm 02 Core complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth and getting in any type soil for laying of cables complete all as specified and directed.
Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.
Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
M&L for high density polyethylene pipes (HDPE) of pressure of 50mm dia size, rating 6 kgf/cm2, ISI marked, laid in trenches for cable protection, complete all as specified and directed.
Yashoghan Construction
S GOURAV PRAKASH ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .