SPL REPAIRS OF BLDG NO T-79 E-2-A T-38/B1-B2 AND PROVN OF ONE TOILET AND RAIN WATER SHELTER AT BUNGALOW NO 07 AMBEDKAR MARG UNDER GE (WEST) LUCKNOW

Amount

Dismantling of plain or corrugated asbestos cement (Corrugated, semicorrugated etc) sheets in roof coverings complete all as specified and directed

S & F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S & F Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed

S&F 'E' board of size 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick GS sheet and of size 24x32x300mm abd soaced at 1200mm centers securely fixed to be structural soffts by approved hangers at 1200 mm maximum centrers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm center to from 1200x600mm modules cross tee longer than 600mm to be supported independtly. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture insturction.

Demolition of brick work or stone/ boulder masonry built in cement mortar complete all as specified and directed.

M & L for old size bricks in conforming to IS-12894:2002, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6) complete all as specified and directed.

M&L 15 mm thick rendering in CM (1:6 ) on fair faces of brick wall or concrete surfaces finished evne and smooth without usig extra cement complete all as specified and directed

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick wall or concrete surface including finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

Demolition of PCC in ground floor and paving exc 15cm thick and below or above ground level complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- 1. Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. 2. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed

Taking down chowkhat frame with shutter (without taking out shutter from the frame) n.exc 1.50 Sqm and removing from site complete all as specified and directed

Taking down chowkhat frame with shutter (without taking out shutter from the frame)exc 1.50 Sqm and n.exc.4.00 sqm and removing from site complete all as specified and directed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: 1. M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately 2. For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed Note:- 1. M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately 2. For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid both side decorative type (Laminated both side) flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately

M & L 30 mm thick Factory made solid WPC (Wood plastic Composit) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture including SS wire mesh (G-304) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm shall be fixed with 15 x 15 square tube in side rails with screwing 8 x 28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufacture instruction complete all as specified and complete all as specified and directed.

Providing & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick "D" Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyed backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48x25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm. Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10 mm square guard bars with 6"(152.4mm) pitch, complete for finished item of work including of all taxes, design complete all as specified and directed

S & F of Stainless steel ISI Mark Butt hinges 100mm size complete all as specified and directed

S & F of 200mm long MS Cromium plated barrel tower bolts of extructed section complete all as specified and directed

Supply& fix MS ordinary pattern spring "plate type" including roller & roller plate complete all as specified and directed

S&F of MS Cromium plated sliding door bolt 250mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed

S & F of 200mm size Extruded aluminium alloy powder coated handles (As per sample kept in sample room) fancy type, fabricated type, anodised complete all as specified and directed

Complete removal of existing treatment on walls any number of layers by scrapping with steel scrapper or by other means and M&L for prepration of newly plastered surfaces of wall and applying one coat of alkali resistance primer and two coat of oil bound distemper over a one coat of wall care putty upto smooth surfaces complete all as specified and directed.

Complete removal of existing treatment on walls any number of layers by scrapping with steel scrapper or by other means and Material & labour preparation of newly plastered surfaces of wall & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces one coat wall care putty upto smooth wall finishing complete all as specified and directed

S&F Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm ,5mm thick plain glass and required ccessories.area nexc 3 sqm complete all as specified and directed. (Note: The unit rate quoted by contractor includes cost of glass, wire mesh and includes all other connected accessories. Net Opening will be measured for payment purpose.)

M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls all as specified and directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors all including taking down old pipe complete all as specified and directed

Ditto- all as per item No 28 above but except taking down of old pipe complete all as specified and directed

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including taking down old pipe complete all as specified and directed

Ditto- all as per item No 30 above but except taking down of old pipe complete all as specified and directed

S&F in repair 15 mm bore Pillar taps half turn, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed

S&F in repair Stop valves 15 mm bore cast copper alloy fancy type, chromium plated with long shank and cup (concealed type),screwed down high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

Ditto- all as per item No 33 above but except in repair complete all as specified and directed

S&F in repair 15 mm bore stop valves/angle valve copper alloy, fancy type,chromium plated half turn with screwed down, high pressure with crutch or butterfly handle screwed both ends fixed to GI pipe complete all as specified and directed.

Ditto- all as per item No 35 above but except in repair complete all as specified and directed

Supply & Fixing in repair CP shower rose fancy type 125mm thick with or without swivel joints any size including fixed to steel pipe or union complete all as specified and directed

Ditto- all as per item No 37 above but except in repair complete all as specified and directed

Supply & Fixing in repair 15mm bore PVC connection 450mm long with brass coupling and washer complete all as specified and directed

Ditto- all as per item No 39 above but except in repair complete all as specified and directed

Supply & Fixing in repair copper alloy long body bib taps half turn chromium plated suitable for 15mm bore pipe with capstain head complete all as specified and directed

Ditto- all as per item No 41 above but except in repair complete all as specified and directed

Supply & Fixing in repair gun metal/ gate valve screwed both ends to 20mm bore pipe complete all as specified and directed

S&F in position rotational moulded polythylene water storage tanks 500 Ltr capacity (Cylinderical vertical with closed top) hoiset & fixed in position including 20mm dia float valve including dismantlling of existing tank complete all as specified and directed

Supply and fixing in repair of vitreous china wash hand basin flat back size 550x400mm and including brackets and CP waste coupling 32mm dia and PVC waste pipe complete all as specified and directed

S&F in repair PVC valveless syphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed

Ditto- all as per item No 46 above but except in repair complete all as specified and directed

M&L in repair vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed

Supply & fix in repair CP Brass Tubular Towel Rail, 20mm dia D type 60 cm long between flanges complete all as specified and directed

S&F in repair 25 mm dia stainless steel curtain rod (weight not less than 0.20 Kg/ RM) superior quality with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed.

S&F in repair glass corner shelves fancy type 6mm thick 250 x 250mm size and fixed over CP brass brackets complete all as specified and directed

M&L in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed

Supply and fixed in repair 75 mm dia PVC nahani trap with CP grating including jointing to waste pipe fixed in cement concrete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps including taking down existing pipe any type complete all as specified and directed

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps including taking down existing pipe any type complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bend/ socket, any radius complete all as specified and directed

M&L for glazed ceramic coloured tiles of size ( 350 x450mm ) x 7mm thick in walls etc, set & joints in neat cement slurry and pointed in white or coloured cement to match the colour of tiles as in skirting/dados over and including 10mm thick rendering in cm 1:4 including dismantling of existing tiles complete all as specified and directed

M&L for Non skid ceramic coloured floor tiles shade as approved of size 7-8mm thick and area of each tile exc 0.06 sqm but not exceeding 0.11 sqm laid over etc set and jointed in heat cement slurry & pointed in coloured cement and including 15mm thick in near cement screed(1:6) including dismantlling of existing tiles complete all as specified and directed

Ditto- all as per item No 59 above but size of tiles exc 0.11 Sqm & n.exc 0.18 Sqm over and including 10mm thick screed plaster in CM 1:4 complete all as specified and directed

M& L for Vitrified tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding , removing and rubbish off the premise etc complete all as specified and directed

All as per above item No-61 but on vertical surfaces including 10mm thick screed plaser in CM 1:4 , complete all as specified and as directed.

M&L 75mm thick cement concrete 1:3:6 typeC-2 using 40mm graded stone aggregate as in sub bases of floors and pavings etc. finished even and fair complete all as specified and directed.

Ditto- all as per item No 63 above but using PCC 1:4:8 type D-2 complete all as specified and directed

S&F Chequered cement concrete tiles 30cm x 30cm x 25 mm thick set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed bedding layer in CM 1:6 complete all as specified and directed.

M&L for cement concrete type B1 1:2:4 (20 mm graded aggregate) plinth courses, string courses,lacing courses, copings, kneelers, apex stones, bed plates, provided , water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type soil complete all as specified and directed

M & L for PCC (1:4:8) type D-2, using 40mm graded stone aggregate as in foundations, fillings as mass concrete complete all as specified and directed

M&L for 40mm thick PCC 1:2:4, type B0 as in damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed

M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sqm complete all as specified and directed

Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm complete all as specified and directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed

Removing of material exc. 250m but n exc 500 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a true surface complete all as specified and directed

M&L for 50mm thick PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in pavement/ floor, laid in panels n. exc. 2.5 Sqm with top finished even and smooth without using extra cement including glass dividing strips as per site requirement complete all as specified and directed

M/L 15 mm thick rendering in cement mortar 1:4 on brick or concrete surfaces and finished even and smooth without using extra cement incl necessary scaffolding complete all as specified and directed

M&L for Preparation of newly plastered wall surfaces and applying two coat of cement base paint over a coat of alkali-resistant priming paint all complete all as specified and directed

M & L for preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed

S&F aluminium frame work for doors , ventilators, partition walls with one or more rebates including joining cleat for fixing etc incl fixing of louvered glass in half of frame and half portion to be provided with fixed wire mesh complete all as specified and directed

S & F 3.00 mm thick louvered glass fixed in aluminium frame as provided complete all as specified and directed

S & F Stainnless steel wire cloth,0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wirre staples or rubber/all beads complete all as specified and directed

S & F 200 mm long aluminium anodised, barrel tower bolts of ex- truded section and fixed complete all as specified and directed

S & F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed

M&L Granite 18- 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in CM 1:4 including moulding complete all as specified and directed

S&F Oval shape WHB size 550 x 400mm fixed on granite platform complete (Make : Cera/Prayag), union, waste pipe, pvc connection, coupling, pedestal etc complete all as specified and directed

S & F CP brass center hole mixer for wash basin for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed

S & F brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe of 15 mm bore size complete all as specified and directed

S&F Vitreous China wash down water closet pan, pedestal pattern, white, with 'P' or 'S' trap, (excluding flushing cistern and flush pipe,) including plastic water closet seat cover, white, closed pattern with flat bottom and cover, fixed with MS chromium plated hinging device including CI hubless connector pup fit connector pipe (or outgoing pipe) and to flushing pipe etc. and making good to floor complete all as specified and directed

M & L for Health faucet Brass/ chromium plated suitable for 15 mm dia pipe with 1.25 metre long flaxible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed

S& F sheet glass shelf assembly consisting of 5.5mm thick sheet glass (cutting in any shape) fixing with chromium plated brackets guard complete all as specified and directed

S& F Stainless steel Grating doom 100mm dia complete fixing in floors, complete all as specified and directed

S& F Stainless steel Grating doom 100mm dia with waste hole complete fixing in floors complete all as specified and directed

Cutting 25 mm existing steel tubing for alterations or additions (Each cut measured) in position without taking down complete all as specified and directed

S & F stop valves suitable for 20 mm bore iron pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed

S&F in reapirs Cast iron floor trap 100 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

S&F in reapirs Cast iron gully/nahani trap 100 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

S & F 100 mm bore Cast iron soil, Spun, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed

S & F 75 mm bore Cast iron soil, Spun, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed

S & F CI bends any radius 100mm size complete all as specified and directed.

S & F CI bends any radius 75 mm size complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in concrete bed to drain pipes including packing under and hauching against the sides of pipes after they are laid and tested complete all as specified and directed.

S&F PVC(SWR) pipes 150mm bore, double socketd , In any length with rubber ring joints , in any length laid in floors/ trenches, complete all as specified and directed.

M & L for cutting into existing manholes for connecting new drains (150 mm bore of pipe) and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers n.exc 25 cm in soil complete all as specified and directed.

Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level n.exc.1.50 mtr above the starting point complete all as specified and directed.

M & L for PCC 1 : 3 : 6 type C1 using 20 mm graded stone aggregate as in foundation filling for securing posts complete all as specified and directed.

S&F tubular framed steel trusses/ purlins made out of MS medium grade tube (ERW or induction butt welded) upto 60mm bore conforming to I.S.1161-1979 grade St.-240 Quality A, including welding of distance pieces, cleats complete all as specified and directed.

M & L for preparing new surface of steel & iron work of any description exc 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for 60 mm coloured machine pressed rubber moulded precast concrete interlocking paver block incl any shape and size having 6-8 mm white cement top layer with epoxy coating in colour (Red/yellow) M-35 Grade grey cement and pigment above 50mm thick sand cushioning complete all as specified and directed.

Taking down carefully copper/aluminium point wiring(light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose,fan regulators, sketch light fittings, and making good the disturbed surface of walls and floors etc complete all as specified and directed

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls complete all as specified and directed

Taking down carefully copper/aluminium sub main wiring/ service connection including teak wood batten/ conduit and making good the disturbed surface of walls complete all as specified and directed

M&L, Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:- Note: Switch and socket to be measured and paid for separately (a) One light/fan point controlled by one switch

All as per item No 114 above but one socket outlet point 5 Amp on an independent board complete all as specified and directed

All as per item No 114 above but on the same board complete all as specified and directed

All as item No 114 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15/20 Amp socket out let point on an independent board complete all as specified and directed

S & F switch piano flush button single pole one way 5 Amp 240 volt complete all as specified and directed

S & F switch piano flush button single pole one way 15 Amps complete all as specified and directed

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete all as specified and directed

S & F socket outlet flush type 5 pin 5 Amps 240 volts complete all as specified and directed

S & F ceiling rose surface bakelight two to three terminal complete all as specified and directed

S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and directed

S&F fan regulator electronic, step up socket type, 230 volt and conection complete all as specified and directed

Supply and fixing in repairs LED lamp 7/9 watt, complete all as specified and as directed.

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed

S&F in repair super bright LED (2X2), 36 W, 6000 K recess mounting with high efficent LED source complete all as specified and directed

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed

S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and directed

Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed.

M&L for two single core PVC insulated FRLS cable 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25 mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and directed Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate

M&L for two single core PVC insulated FRLS cable 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and directed Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate

S & F MCB DB TPN 4 Way (Vertical Type) double door, for mounting, MCBs, isolator, ELCBs etc factory made, confirming to IS: 13032 fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral link and 200 Amps rated bus bar , DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of same make as MCBs /Isolator. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way complete all as specified and directed. Note:- The DBs shall be of IP 42 protection class.

S&F in repairs MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA complete all as specified and directed

S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 12 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thick double door complete all as specified. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’)

S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 8 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thick double door complete all as specified and directed. Note:- MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’

S&F MCB SPN 40 to 63 Amp 240 volts 10 KA breaking capacity complete all as specified and directed

S&F MCB SP 10 to 32 Amp 240 volts 10 KA breaking capacity complete all as specified and directed

Supply and fixing in repair modular ac box power unit with socket plug top and MCBs with a two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed

Supply and fixing exhaust/fresh air fan 230/240 V of size 250 mm sweep (PVC body) 1100-1325 RPM with louvers including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall including all necessary fixing accessories complate all as specified and as directed.

Taking down Exhaust fan 350/450 mm sweep any type and refixing after oiling, greasing and painting with writing the MES no and any reqdof anchorfastner nut bo;t washer , including electric connetion work complete all as specified and directed.

Taking down ceiling fan 1200/1400 mm sweep any type and refixing after oiling, greasing and painting with writing the MES no including electric connetion work complete all as specified and directed.

Taking down water heater (Geyser) 25/50 ltr capacity or any type and refixing after overhauling and painting with writing the MES no and 4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos flexible steel hose pipe of size 15 mm, 450 mm length & suitable plug top of 16 Amp capacity complete all as specified and directed.

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sq mm 3.5 core complete all as specified and directed.

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sq mm 2.0 core complete all as specified and directed.

Excavation in trenches in soft/loose soil n.exc 1.5M wide and n. exc 1.5 M depth and getting out, including framing bottom surface for laying cables complete all as specified and directed

Returning, filling in soil watering and ramming into layers of 25cm after laying of cable complete all as specified and directed

Disposal of surplus soil n.exc 50M distance from the starting point and depositing where complete all as specified and directed

M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) complete all as specified and directed

Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable complete all as specified and directed

M & L for Earthing complete with glavanised steel earth plate elactrode 600x600x6 mm thick buried directly in ground with top edge of the plate not less 1.5 mtr deep below with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate no 5 of MES SSR Pt-I 2009 print and as directed.

S&F water heater storage type electric BEE 5 star rated of capacity 25 Ltrs to operate on 230 Volt AC, vertical type including 4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos flexible steel hose pipe of size 15mm, 450mm length & suitable plug top of 16 Amp capacity complete all as specified and as directed.

M/S KAUSHIK CONSTRUCTION (BID ID -3298306)

MS SANTOSH KUMAR SINGH (BID ID -3298474)

M/s Chandra Mohan and Sons (BID ID -3293933)

B.S.S.ENTERPRISES (BID ID -3294097)

D K Engineers and contractors (BID ID -3294095)

BAJAJ CONSTRUCTION (BID ID -3292418)

SEAHAWK ENTERPRISES PVT LTD (BID ID -3298245)

M/s Bajpai Constructions (BID ID -3293792)