Repair Work

Design, Drawing, fabrication, supply, erection, testing and commissioning of Vertical lift sliding type gate with frame consisting of skin plate, sealing frame, stiffeners, horizontal and vertical girders, guide, stainless steel flat/Brass flat, rivets, wedges, lifting rods etc., with all accessories as per relevant IS code including frame & gate complete set for Canal Cross, Escape, Head regulator /Tank head regulator including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, seal fixing, tools and tackles etc., applying two coat of zinc rich epoxy primer to give dry film thickness of 70± 5 microns and finish coat(two coats)of solvent less coal tar epoxy paint using airless spray to provide dry film thickness of 150± 5 microns per coat thus total dry film thickness of all coats, including primer coating, should not be less than 350microns., complete as per specifications and approved drawingswith all lead and lifts, including packing and forwarding, transportation charges for structural steel components and other materials.Weight of material required for one HR gate 91.27kgs, Weight of 3 gates ( for Dinerpura HR ,kangaon HR and chhidgoan HR ) gates=91.27x3=273.834kgs

Providing, fabrication, machining with straightening work of Guide Tee, Track, Sealingframe, Leaf frame or any part of gate's, complete as per drawing with testing, including cost of allmaterials, with machinery, labour, tools and tacklescutting, aligning, welding, finishing, cleaning, etc.,applying one coat of zinc rich epoxy primer and two coats of cold applied coal tar epoxy paint, etc., complete as per specifications and approved drawings with all lead and lifts, including packing and forwarding, transportation charges for structural steel components and other materials. Rate of work with all materials. Weight of material to Repair Frame, support frame of 1 HR =38.28kgs, Total weight required for 3 HR gates (Pahatgaon HR,soutada HR and Bhilgoan HR)=32.28x3=114.84kgs

Erecting work of fabricated gates, any parts of gate's and any accessories of gate's, complete as per drawing with testing, including cost of all materials required for completing the job like welding rods, tools tackles etc., with machinery, labour, tools and tackles cutting, aligning, welding, finishing, cleaning, etc., applying one coat of zinc rich epoxy primer and two coats of cold applied coal tar epoxy paint, etc., complete as per specifications and approved drawings with all lead and lifts, including packing and forwarding, transportation charges for structural steel components and other materials. total work of dismantling of existing gate leaf , frame and support frames ,concrete parts and other supporting part of gates =273.834kgs +114.84=388.67kgs

Special Item:- IInd stage design mix concrete with graded metal of max size 12.5 mm in gate groove & sill beam, after fixing and alignment of second stage parts, sill beam. Including cost of material, labour for shuttering, maxing, laying scaffolding consolidating, curing and cleaning & finishing /chipping as required complete.Material required for one HR gate =c/s area x5width of gate =0.01x5x0.6=0.03cum,For 3 gates ,0.03x3=0.09cum

Providing and fixing work of head stock Chuck Nut of required size (for M-70/M-75/S-36 type head stock ) complete work site for Alampur dy head.

Providing and fixing work of thrust ball bearing of Required size of canal gates complete work at site.

Providing and fixing work of Head stock cap (M-70/M-75/S-36 type head stock )complete work site.

Please Enable Macros to View BoQ information